Specifications
- 148 -
4.4 Memory Switch
Memory switch has a function to store various settings selected by the user alternatively in nonvolatile
memory. Memory switch setting is retained unless the memory switch is changed.
Memory switch setting can be changed by the manual setting in memory switch change mode or by a
command.
* Hereinafter memory switch is referred to as MSW.
4.4.1 Memory Switches
No. Function OFF ON
MSW1-1 Power ON Info
● Send
Not send
MSW1-2 Buffer Size
● 4K bytes
45 bytes
MSW1-3 Busy Condition
● Full/Err
Full
MSW1-4 Receive Error
● Print“?”
Invalid
MSW1-5 CR Mode
● Ignored
LF
MSW1-6 Reserved
● Fixed —
MSW1-7 DSR Signal
● Invalid
Valid
MSW1-8 Reserved
● Fixed —
MSW2-1 Reserved
— ● Fixed
MSW2-2 Reserved
● Fixed —
MSW2-3 Spool print
● Invalid
Valid
MSW2-4 Full col print
● Line Feed
Wait Data
MSW2-5 Resume aft PE
● Print next line
Print top
MSW2-6 Reserved
— ● Fixed
MSW2-7 Reserved
● Fixed —
MSW2-8 PNE sensor
● Valid
Invalid
MSW3-1 Reserved
● Fixed —
MSW3-2 Reserved
● Fixed —
MSW3-3 Parallel 31 Pin
● Valid
Invalid
MSW3-4 Reserved
● Fixed —
MSW3-5 Reserved
● Fixed —
MSW3-6 Reserved
● Fixed —
MSW3-7 CBM-270 mode Invalid
● Valid
MSW3-8 Resume Open Err
● Close
Command
● Default (Factory shipment)