Specifications

- 154 -
• MSW 3-3: Reset signal for parallel I/F 31 Pin
[Function]
Selects whether to reset the printer by the signal of parallel I/F 31 Pin.
OFF (0) ON (1)
Parallel 31 Pin Valid Invalid
Operation at ON (1): Used as Reset signal.
Operation at OFF (0): Not used as Reset signal.
[Default] OFF(0) [Valid]
• MSW 3-4: Reserved (OFF(0)Fixed)
• MSW 3-5: Reserved (OFF(0)Fixed)
• MSW 3-6: Reserved (OFF(0)Fixed)
• MSW 3-7: Emulation
[Function]
Sets to enable/disable CBM-270 compatible mode.
OFF (0) ON (1)
CBM-270 mode Invalid Valid
Operation at ON (1):
Enabled. Use of CBM-270-specific command (<ESC~J>, <DC3 n>, <ESC v>) is enabled.
Operation at OFF (0): Disabled.
[Default] ON(1) [Valid]
• MSW 3-8: Clearing Cover Open Error
[Function]
Selects the method of clearing Cover Open error.
OFF (0) ON (1)
Resume Open Err Close Command
Operation at ON (1):
Printer clears error when it receives a command <DLE+ENQ+n> after detecting that the cover is
closed.
Operation at OFF (0):
Printer automatically clears error when it detects that the cover is closed.
[Default] OFF(0) [Close]