Specifications

- 91 -
fn = 3: Function 3 Setting Memory Switch Value
GS (E pL pH fn [a1 b18 ··· b11] ··· [ak bk8 ··· bk1] fn = 3
[Code] <1d>H<28>H<45>H pL pH fn[a1 b18···b11]···[ak bk8···bk1]
[Range] 10≤ (pL + pH x256) ≤65535
fn = 3
a = 1, 2, 3
b = 48, 49, 50
[Outline] • Changes the memory switch set in a to the value set in “b”.
b Function
48 Sets corresponding bit to OFF.
49 Sets corresponding bit to ON.
50 Does not change corresponding bit.
• Setting memory with 1 (a = 1)
n b (Set Value) Function
48 (Default) Reports the power on.
1
49 Does not report power on.
48 (Default) Sets input buffer capacity to 4K bytes.
2
49 Sets input buffer capacity to 45 bytes.
48 (Default) Sets input buffer full and offline to be Busy.
3
49 Sets to be busy with input buffer full.
48 (Default)
At the occurrence of receiving error, replaces the data with
“?”.
4
49 At the occurrence of receiving error, ignores the data.
48 (Default) Disables CR (0DH).
5
49 Enables CR (0DH).
6 48 (Default) Reserved
48 (Default) Does not reset at serial I/F pin 6.
7
49 Resets at serial I/F pin 6.
8 48 (Default) Reserved