User`s manual

3.5 CITIZEN TCP/IP PORT

To use status function of the driver through LAN or wireless LAN interface, it is necessary to have CITIZEN

TCP/IP port monitor.

CITIZEN TCP/IP port monitor needs to be installed prior to the printer driver installation.

(Refer to “CITIZEN TCP/IP Port manual” for the details of the installation.)

On the “Port Selection” screen in the middle of printer driver installation steps, installed CITIZEN TCP/IP

Port is shown. Please choose the port. (Refer to the picture below.)

You can also add new CITIZEN TCP/IP Port here.

As shown in the right

picture, press “Addition of

CITIZEN TCP/IP port”

button to add new CITIZEN

TCP/IP port

* If status function is used through standard TCP/IP port, there could be trouble of PC freeze by

waiting for status data from printer.