User`s manual

-
2
-
Revision history (2.xx/1.6xx)
Date Version Details
09/06/25 V2.00 Issued
09/10/29 V2.01 Added CT-S601
09/12/15 V2.02 Windows7 is supported
Installer is changed. (Status function is supported on all the drivers.)
Explanation for CITIZEN COM port is added..
Explanation for Additional driver function is added.
10/5/20 V2.02 (Modified) CT-S651/851 are added.
10/5/27 V2.23 Version number is changed to same version as driver itself.
Status monitor is updated to Ver2.2.4.0. Online/Offline can be detected correctly..
USB data transfer time out value of language monitor is changed to 8 seconds to avoid the
communication error caused by bi-directional communication via USB on Windows7.
(32-bit)/(64-bit) are added to FileDescription of DLLs.
Windows7 device icon for CT-S60,651,801 and 851 are added.
10/11/25 V.2.24 Ethernet is added for supported interface
POS Printer Utility is updated to Ver1.8.3 (Wrong setting values are corrected.)
Status Monitor Library is updated to Ver1.3.1
(The time to get status is shortened.)
11/4/13 CT-S310II driver is added.
2 dimensional barcode fonts are added.
“Label/BM” function is changed to “Paper Media” function.
“Cutter Mode” is refined to support Label/BM paper cutter mode.
“Paper Feed” function is newly added for the adjustment of paper feeding before the cut.
File sender garbage character problem is fixed.
Changes to show/hide buttons and tabs are added.
Status monitor is updated to Ver2.2.5.2 for minor changes.
POS Printer Utility is updated to 2.0 and is excluded from driver installer.
Document for Ver1.660 is integrated.
12/6/15
V2.25/1.660
Explanation about TCP/IP port is added.
13/3/1 V2.27/1.680 Windows8 is supported.
Version dialog function is added.
The problem of cutting in the middle of watermark is fixed.
The problem of reprint and coupon print from client PC to shared printer is fixed.
Status monitor is updated to 2.2.5.3.
Win8/Win Server2012 are supported.
Log file function is improved.
Setting to accept/reject Offline status is added.
Setting to enable/disable notification of printing completion is added.
Status inquiry command sequence for each interface except parallel is changed.
Unit of status monitor setting is changed from driver base to model base.
Driver port setting tool is updated.
13/7/22 V2.28/V1.690 Installation failure on non-English Windows is fixed.
Problem to get printer status with LAN/WLAN is fixed.
Problem of PMU2xxxIII presenter status is fixed.
“X” mark is removed from the icon for software un-installation list
Revision history (1.xx)
Date Version Details
05/08/01
050420（V1.00）
This document is released
05/09/01
050901 （V1.40）
CT-S280 driver is added.
FontAxx / FontBxx are added to CD-S500 series driver
The problem with longer data than fuｌｌ column is corrected.
Fewer columns problem with Font 15cpi Size 80 is corrected.
The problem with mixed font lines between printer font and TrueType font is corrected.
The problem with custom size paper for CT-S300 is fixed.
05/11/16 051116 (V1.51) CT-S2000 driver is added
06/1/28 V1.53 Printing garbage problem with parallel I/F is fixed.
High resolution CD-S500 graphic printing problem is fixed.
CD-S500 longer than full column printing problem is fixed.
06/7/30 V1.56 Automatic line feed is added to the end of CT-S280 printing.
The problem of feed length after barcode printing is fixed.
The problem of divided TrueType font is fixed.
The ｐｒｉｎｔ speed down by above change is improved.
Graphic print method of CT-S300 is changed.
CT-S4000 driver is added.