User`s manual

-
3
-
07/3/20 V1.57 Another problem of feed length after barcode printing is fixed.
Problem of unstable character size is fixed.
CT-S4000 Label driver is added.
BD2-2220/2221 is added.
“Printer Features“ function is added to print in fixed length.
Drivers are adapted to Windows Vista
Euro mark problem is solved.
07/04/30 V1.57a CT-S310 driver is added
PMU2xxx driver is added.
07/12/21 V1.581 64 bit drivers are added.
Installer version is available.
CT-S2000Label is added.
CT-S4000 Compress driver is added.
Partial cut is added to Cut method of PMU-2xxx
NV logo transaction by ESC ( L can be chosen for CT-S2000/4000/PPU700
Graphic print method of CT-S280 is changed.
The problem of printing some Unicode characters is fixed.
The width information of FontA88 is corrected.
The width information of 6.25cpi and 48point is corrected.
The problem of wrong position logo by multiple page printing is fixed.
Problem of wrongly printed printer font at the end of page is fixed.
The problem of paper length by multiple page of upside down printing is fixed.
08/07/02 1.582 POS Printer Utility can be called from [Tool] property of driver.
File transfer function is added to [Tool] property of driver
Strange print position problem of printer font with Upside-Down function is fixed.
Missing last vertical dot-line problem in high quality graphic printing is fixed.
Actual printing area for CD-S500series is expanded.
The problem of white gap in horizontal direction printing is fixed.（This solution requires firmware
upgrade as well. Applicable model is CT-S2000, CT-S4000, CT-S310 and succeeding models.）
The command for cut for CT-S300 & 310 is changed from GS V to ESC i, ESC m.
FontBxx size of CT-S2000/4000/S28x/BD2-2xxx/PMU-2xxx/CBM1000II is corrected.
CT-S281 driver is added.
08/12/25 1.582a The problem of white gap in horizontal direction causes garbage printing with old version CT-S310
firmware. So the function was removed from CT-S310 driver.
09/04/08 1.583 CT-S281L driver is added.
Custom paper definition in GPD file is changed as follows.
Deleted left margin (*MinLeftMargin): All models
Changed max defined size (*MaxSize):
CT-S4000: from (640,32767) to (896,26182)
Others from (???,32767) to (???,26182)
No change: CT-S500 series
Changed minimum defined size (*MinSize):
Label type (203,203)
Non label type (20,20)
PPU700 (203,719)
No change: CD-S500series and CT-S4000 compressed.
Solution for white gap in horizontal direction is added to CT-S281standard driver.
The problem of disappeared button for POS Printer Utility by changing driver name is fixed.
09/12/15 1.600 CT-P290 series are added.
The problem to print through Remote Desktop is solved.
The problem of order to print NV logo in multiple pages on Windows7 is fixed.
Icons for "Printer functions" in driver property are changed.
Upside down printing function is deleted.
Label/Black mark driver is integrated into standard driver.
10/2/9 1.610
（not released）
Status monitor is renewed and status function is very much improved.
10/6/21 1.630 Problem caused by printing from multiple processes is fixed.
With the combination of logo printing at print job end + double high printer font for last print data,
paper feeding length is changed according to logo data presence in the NV memory of the printer.
This problem is fixed.
(32-bit)/(64-bit) are added to FileDescription of DLLs.
Status monitor is updated to Ver2.2.4.0. Online/Offline can be detected correctly..
USB data transfer time out value of status monitor is changed to 8 seconds to avoid the
communication error caused by bi-directional communication via USB on Windows7.
Paper at presenter exit can be detected as PRINTER_STATUS_OUTPUT_BIN_FULL on PPU-700.
11/1/6 1.640 Driver for BD2-4280,BD2-4281are added.
Driver name of PMU-2320 is changed to PMU2xxx
Driver for PMU2xxxIII Presenter is added
Status Monitor Library is updated to Ver1.3.1. (The time to get status is shorten.)