Instruction manual

Activating the functions of the dedicated app
Searching for the iPhone [iPhone Search]
When you set “
iPhone Search
” to “
ON
”, you can send signals to the registered
iPhone in the connectable range with the watch.
When receiving the signal, the iPhone sounds depending on its setting.
Locating your iPhone using sounds
Press and release both the lower right button and the upper right button
simultaneously when the mode of the watch is [
TME
], [
L-TM
], [
PR
] or [
CT
] and
the second hand indicate second.
The second hand points “
ACT
” and the signals are started to send.
• It may take up 20 to 30 seconds to start sounding.
• When the switch of “
Scan
” or “
Waiting for Reconnection
” is “
ON
”, the signals
can be sent to the disconnected iPhone.
• iPhone sounds even when the muting switch is activated or the sound volume is
set to 0.
• When the earphones are plugged, iPhone does not sound.
iPhone Search ON
51