Instruction manual

Checking and correcting the reference position [
3
0
2
]
Checking the reference position
Check whether the reference position of each hand and indication is accurate.
1
Change the mode to [
3
0
2
].
(See pages
18
and
19
)
The hands and date will rotate to the current reference
positions stored in memory.
2
Check the current reference position.
By referring to the chart on page
72
, ensure the
reference position of each hand and the date are
correct.
• If all reference positions are correct, go to step 3
below.
• If some reference positions are incorrect, go to page
74
.
3
Change the mode to either [
TME
] (or [
L-TM
]) to
finish the procedure.
(See pages
18
and
19
)
73