Instruction manual

Checking and correcting the reference position [
3
0
2
]
4
Rotate the crown to correct the reference position of the active hand/
indication .
• When you rotate the crown quickly a few times, the hands and indications will
move continuously.
The second hand will move one full rotation, and the other hands and
indications will move until you rotate the crown either clockwise or
counterclockwise.
5
Repeat steps 3 and 4 as required.
6
Push the crown in to position .
7
Change the mode to either [
TME
] (or [
L-TM
]) to finish the procedure.
(See pages
18
and
19
)
75