Instruction manual

Troubleshooting
1
Pull the crown out to position .
The second hand moves to indicate the 30 seconds
position.
2
Rotate the crown to change the mode to [
3
0
2
].
All hands and identifications other than the second
hand will indicate the current reference position stored
in memory.
Do not operate the watch until all hands/indications
stop moving.
3
Pull the crown out to position .
The second hand indicates the current reference
position.
4
Press and release both the lower right button
and upper right button
simultaneously.
When you release the buttons, the watch will vibrate and
all hands will move indicating All Reset is successful.
Make sure the watch is fully charged as outlined on pages
10
to
13
before
proceeding.
83