Instruction manual

95
Precautionary items and usage limitations
<Protective Stickers>
Be sure to remove any protective stickers that may be on your watch (case back, band, clasp,
etc.). Otherwise, perspiration or moisture may enter the gaps between the protective stickers
and the parts, which may result in a skin rash and/or corrosion of the metal parts.
CAUTION
Always Keep Your Watch Clean
Rotate the crown while it is pressed in fully and press the buttons periodically so they do not
become stuck due to accumulations of foreign matter.
The case and band of the watch come into direct contact with the skin in the same manner as
undergarments. Corrosion of the metal or unnoticed soiling such as that caused by perspiration
and dirt can soil sleeves and other portions of clothing. Keep your watch clean at all times.
The case and band of the watch come into direct contact with the skin. If you think there is
something wrong, discontinue wearing the watch immediately and consult your physician.
In the case of accumulation of sweat or dirt on a metal band or case, clean thoroughly using
a brush and neutral detergent. In the case of a leather or rubber (urethane) band, wipe clean
using a dry cloth.
Leather bands may become discolored by perspiration or dirt. Always keep your leather band
clean by wiping with a dry cloth.