Instructions

1/1
051x Abbreviated instruction
• To see details of specifications and operations, refer to the instruction manual: 051x instruction manual
English
Component identification
Minute hand
Date indication
Crown
Button
B
Button
A
Chronograph minute hand
Hour hand
Chronograph hour hand
Second hand
Chronograph second hand
Crown's position
0 1 2
• Actual appearance may differ from the illustration.
• The crown has two positions when pulling it out.
• Refer also to our web page for detail of usage of the scale and bezel on the watch.
(
http://www.citizenwatch-global.com/support/pdf/enhanced/e.pdf
)
Setting the time
1.
Pull the crown out to position
2
when the small second hand
points 0 second.
2.
Rotate the crown to set the time.
• Move the hands 4 or 5 minutes forward and move them back to the right
time to set the time more precisely.
• Change of date indication shows it just became AM. Take care the time set
is AM or PM.
3.
Push the crown in to position
0
in accordance with a reliable
time source to finish the procedure.
The small second hand starts moving.
Setting the date indication
• Do not adjust the date indication while the watch shows 9:00 PM ‒ 1:00 AM.
Otherwise, the date indication may change incorrectly thereafter.
• Date indication adjustment is required on the first days of March, May, July,
October and December.
1.
Pull the crown out to position
1
.
2.
Rotate the crown to adjust the date indication.
3.
Push the crown in to position
0
to finish the procedure.
Using the chronograph
• Measuring up to 12 hours in 1 second increments.
1.
Push the crown in to position
0
.
2.
Press and release the button
B
.
The chronograph starts moving.
Start/stop: press button
B
.
Reset: press button
A
while the chronograph is stopped.
• Be sure to reset chronograph after finishing measurement.
Adjusting the 0 position of the chronograph hands
Follow the steps below when the chronograph hands (chronograph hour/
minute/second hands) do not return to the 0 position even after resetting the
chronograph.
1.
Pull the crown out to position
2
.
2.
Press and release the button
B
repeatedly to adjust the
chronograph second hand to the 0 position (12 o’clock position).
• Pressing and holding the button moves the hand continuously.
3.
Press and release the button
A
.
The chronograph minute and hour hands return to the 0 position.
4.
Set the time and push the crown in to position
0
.
Chronograph
hour hand
Chronograph
minute hand
Minute hand
Date indication
Crown
Button
A
Button
B
Chronograph
second hand
Second hand
Hour hand