ISO 9001 : 2000 CERTIFIED R0 CP INSTRUCTION MANUAL Printer 2
Intended Use Contents Model CPR02 is a data printer designed to receive weighing data from Intended Use 1 a connected weighing instrument and to print it on plain paper (roll width: 57.5 mm). Text and data are printed with up to 24 characters per line. Safety Precautions 2 Installation 2 This data printer is equipped with a real-time clock.
Safety Precautions Installing the Ink Ribbon Cassette § To install the ink ribbon cassette, refer to “Maintenance” Page No..15 When cleaning the data printer, make sure that no liquid enters the printer housing: use only a moist cloth to wipe down the housing. Inserting the Paper Roll § Insert the paper roll as described in “Maintenance” Page No...14 Installation Equipment Supplied – – – – Setting the Date and Time § For instructions on setting the date and time, please refer to “Settings” on Page No..
Printing the Data of the Connected Weighing Instrument – Numbering function = 1 (-p4-) $ If necessary, print required blank lines (line feed): Press the key several times, (Factory setting = 1) The symbol shown on the top right side will be displayed 123456789012345678901234 12-AUG-2008 10:25:38 $ To print the date and time, press the key You can deactivate the numbering function during subsequent operation of the printer by pressing the key > The printout will be as shown on the left 123456789012345
Data Transfer and Statistical Evaluation in the Manual Mode Required Printer Configuration You must set the following printer configuration in the “Statistics Applications” menu: Recording and Evaluating Data § Press the key to clear the statistics memory prior to initial data transfer 123456789012345678901234 01: 02: 03: + + + 123.6 117.8 119.1 g g g > The value will be printed out – Data transfer manual = 0 (-p5-).
Settings : Date: How to enter into date and time menu? Press button for 5 sec at stand by mode or Press 2 sec when printer is switched on. Data Menu: How to enter into Data Menu? Press PRINT button for 5 sec at stand by mode or Press PRINT button for 2 sec when printer is switched on. button for Then printer will enter into setting mode of date. Then with the help of and , the value will increase and decrease respectively. Then printer will enter into setting mode of Data menu.
Designation Print VARTEXTl Print VARTEXT2 Print number of measurements Print mean value Print variation coefficient Print sum of individual values Print standard deviation Print minimum value Print maximum value Print difference between maximum and minimum values Print date/time Display -S1- PRINT VERTEXT: -S2- PRINT VERTEXT: -S3- PRINT READ COUNT: Setting option 0 = no, l = yes on statistics printout 0 = no, l = yes on statistics printout 0 = no, l = yes -S4- PRINT MEAN VALUE : -S5- PRINT STD.
Statistics Menu DESIGNATION Passcode Data transmission baud rate (baud rate) DISPLAY PASSCODE: BAUD RATE: SETTING OPTION 100--9999 1200,2400,4800, 9600,19200 Parity PARITY: RS-232C handshake Inverse printing RS232 HANDSHAKE MODE: -PI- PRINT USING CR-LF: -P2- PRINT FLUSH MARGIN: -P3- DECIMAL / COMMA: -P4- NUMBERING FUNCTION: -P5- INVERT PRINT Odd Even Space None 0 = hardware, 1 = software Manual/automatic data transfer -P6- TRANSFER DATA: Date/time when printer starts Print VARTEXT1 when printer
Maintenance Changing the Paper Roll – – – – – To operate your data printer, the paper rolls must have the following specifications: Release the roll holders on both sides Standard paper roll Wood-free paper, 60 g Width: 57.5 ± 0.5 mm Diameter: 65 mm max. Core diameter: 8 mm min.
Specifications Designation Length Width Height Weight Operating temperature Storage temperature Dimensions 16