Instruction manual

15
VIDEO
S-VIDEO: Choose this setting if your DVD player is connected to the TV with S-VIDEO
cable.
Interlace-YUV: Choose this setting if your DVD player is connected to the TV with
Y Cb Cr video cable.
P-SCAN(Y Pb Pr): Choose this setting if your DVD player is connected to the TV with
Y Pb Pr video cable.
E
N
G
L
I
S
H
TV TYPE
16 : 9 (Wide Screen): Choose this setting if your DVD player is connected to a wide screen
TV. If you choose this setting and you don't have a wide screen TV, the images on the screen
may appear distorted due to vertical compression.
4 : 3 LB (Letter Box): Choosing this setting if your DVD player is connected to a normal
ratio TV. connector You'll see the movies in their original aspect ratio (height-to-width ratio).
You'll see the entire frame of the movie, but it will take up a smaller portion of the screen
vertically.
The movie might appear with black bars at the top and bottom of the screen.
4 : 3 PS (Pan & Scan): Choosing this setting if your DVD player is connected to a normal
ratio TV. You can fill the movie to the entire screen of your TV. This might mean that parts
of the picture (the left and right edges) won't be seen.
Notes:
The image display ratio is related to the recorded disc format. Some disc can not display
images in the aspect ratio you choose.
If you play a disc recorded in 4:3 format on a wide screen TV, black bars will appear on
the left and right side of the screen.
You must adjust the screen setting depending on the type of the television you have.
PASSWORD
The password option is initialized locked, and you cannot set the ratings limit or change the
password. In order for the Ratings feature work, the password mode must be turned on. If you
want to set the ratings limit, you will need to enter the default password, which is 0000, then
press Enter to confirm. To change the password, you will be prompted for the old password,
then be prompted for a new. Enter a 4-digit number (this is your password).