Specifications

DSRX1Manual 
VersionNumber:1.01

22



c. Iftheprinterisstoppedinthemiddleofcutting:
1. TurnthepowerbackON.Freethejammedpaperandreturnthecutterbladetothe
readyposition.
Ifthejammedpapercannotbefreed,pleasecontactaservicerepresentative.
2. Removeanypartiallyprintedmaterialfrominsidetheprinter.
3. Followthesectiononsettingthemedia(p.14).
d. Ifthepoweriscutduringprinting.
*Ifthepoweriscutduringprinting,youwillnotbeabletoopenthefrontcover.
1. TurnthepowerbackON.

Thepartialprintwillbecutintoscrap‐sizepiecesandremoved.Afterthis,youwillbe
abletoopenthefrontcover.
2. Checkthatthereisnoprintedmaterialintheprinter.
Ifthepaperisjammed,refertoa.Ifthepaperisjammed.


Caution
DonotturnthepowerOFFwhileprinting.Thiscandamagetheprinter.