Specifications

Troubleshooting
SYMPTOM CHECK ITEM
The player cannot play.
Make sure disc is loaded in.
Make sure disc is correctly loaded.
Make sure disc is not dirty or warped.
Make sure the DVD disc region code is 1.
Make sure water condensation has not occurred.
If it occurs, take out disc and leave the player on for at least
one hour.
There is no sound.
Make sure system connection is correct.
Make sure the power of speakers is turned on.
Make sure the sound setup of DVD disc is correct.
Make sure disc is not dirty or warped.
Clean or replace the disc.
There is no picture or picture is
unstable.
Make sure unit is turned on and is in correct video mode.
Make sure system connection is correct. If it is not, access
the setup menu and select the correct system.
Cannot continue to play and play
a section repeatedly.
Make sure is not in A-B repeat status.
Press A-B button to cancel it.
Make sure disc is not dirty or damaged.
Clean the disc or skip the section.
The remote control does not work.
Make sure there are no obstructions between the remote
control and the player.
Make sure the remote control is pointing at the player.
Make sure battery is inserted or the polarity is correct.
Make sure battery is not weak.
Replace the weak battery.
Other Notes:
Static or other external interfere may cause the player to behave abnormally. In this occurs, unplug
the power-supply cord from the outlet and plug it in again to reset the player. If the problems persist,
then please disconnect the power and consult a qualified technician.
- 33 -