Instruction manual

23
1. Ensure that the crown is in position .
2. Press and hold the lower right button
A
for two or
more seconds.
The second hand moves to “RX” and the watch starts
receiving.
After receiving the time signal, the second hand will
move normally.
• Place your watch on a stable surface where it will not
be disturbed during the update process.
• It takes from two to fifteen minutes to complete the time signal reception.
Successful signal
reception
The time will be updated and the watch will resume
normal operation.
Failed signal reception Normal operation resumes with previously set time.
To cancel the reception
Press and hold the lower right button
A
for two or more seconds.
Cancel the reception and the current time will be indicated.
While receiving the
signal