Instruction manual

Chapter 2 Installation, Configuration and Management
NetScaler 9000 Series Installation and Configuration Guide - Volume 1 2-83
NSICG60_DEC04
An error message is displayed when the user tries to configure an
unlicensed feature.
The error message indicates that the requested configuration action is
not possible because the license for the corresponding feature is not
installed on the NetScaler 9000 system.
2.8.2.1 NetScaler Runtime enforcement of a feature that is disabled
z Load Balancing (LB)
The load balancing policy is not enforced when the LB feature is
disabled. All client requests are sent to the first service that is bound to the
load balancing vserver. If this first service is reported down by the
monitor bound to it, then the vserver is also marked as down.
z SSL Acceleration: No SSL Acceleration is provided when the SSL
feature is disabled.
z Compression (CMP): No compression is done by the NetScaler when the
CMP feature is disabled.
z Content Switching (CS) - A HTTP 503 “HTTP/1.1 Service Unavailable”
response is returned to the client.
z Cache Redirection (CR)
z For Transparent mode, all requests are sent to the origin Server.
z For a Reverse or a forward proxy mode, a HTTP 503 “HTTP/1.1
Service Unavailable” response is returned to the client.
z Content Filtering (CF)
No Content Filtering will be done, that is, there will be zero hits on the
configured filters.
z SureConnect (SC)- Sure connect feature is not triggered.
z Priority Queuing (PQ)
There will be no Priority queues based on the policies configured. All
requests will be either request switched to the service or will be queued
onto the Surge Queue.
z HTTP DOS (HDOSP) - The HTTP DOS protection feature is not
triggered.
z Global Server Load Balancing (GSLB) -