Instruction manual

Chapter 2 Installation, Configuration and Management
2-2 NetScaler 9000 Series Installation and Configuration Guide - Volume 1
NSICG60_DEC04
Figure 2-1 The NetScaler 9400 1U unit that supports Fast Ethernet and has
one GB of memory.
 Ports
a. Two 10/100Base-T network interfaces (labeled 1/1 and 1/2)
b. One auxiliary interface for future use (labeled AUX)
c. Serial Console (9600 baud, 8 bits, 1 stop bit, No parity)
 LEDs
l The LED labeled 1 on the unit corresponds to the port labeled 1/1.
l The LED labeled 2 on the unit corresponds to the port labeled 1/2.
When lit, they indicate the following:
l Green indicates the link is established for the corresponding port.
l Yellow indicates that the corresponding port is active (transmitting or
receiving traffic).
2.1.2 NetScaler 9800-SX
The NetScaler 9800-SX is a 2U unit that supports fiber Gigabit Ethernet and
has two GB of memory. Figure 2-2 shows this model.
Figure 2-2 The 9800-Secure Application Switch
 Ports
a. Four 1000Base-SX network interfaces (labeled 1/1, 1/2, 1/3, and
1/4)