Instruction manual

Chapter 2 Installation, Configuration and Management
2-4 NetScaler 9000 Series Installation and Configuration Guide - Volume 1
NSICG60_DEC04
l LED labeled 100: The corresponding port has been established for
100Base-T.
l LED labeled 10: The corresponding port has been established for
10Base-T.
l LED labeled ACT: The corresponding port is active (receiving or
transmitting traffic).
2.2 LCD Monitor in NetScaler 9000 System
The NetScaler 9000 Series products have a Liquid Crystal Display (LCD) on
its faceplate. This LCD displays real-time statistics, diagnostic information
and active alerts.
Note: By default, the refresh rate of the screen is 3 seconds and this value
can be re-configured using the Product Name (short) system LCD
Program Options.
Figure 2-4 NetScaler 9000 system 9800-T
2.2.1 Overview
As the dimension of the LCD is limited (two lines of 16 characters), the
display information flows through a sequence of screens. Each screen
displays a piece of information about some part of a specific NetScaler 9000
system function.
Liquid Crystal Display on the Faceplate