Instruction manual

Chapter 2 Installation, Configuration and Management
2-6 NetScaler 9000 Series Installation and Configuration Guide - Volume 1
NSICG60_DEC04
2 The second line in the display shows the Product Name (short)
system’s power status.
Note:
1. The message on this screen can be customized using a shell
command. For more information, refer to “NSLCD program
options” on page 12.
2. This Power Up message is displayed until the boot process is
successfully completed.
 Start Up Screen
This screen is displayed only for few a seconds after the Product Name
(short) system successfully starts its operation.
Figure 2-6 Start-up display in LCD
1 The first line in the LCD displays the product name.
2 The second line in the LCD displays the software version and build
number.
 Out of Service Screen
This screen is displayed when the NetScaler 9000 system stops
functioning. The main reasons for the NetScaler 9000 system to stop
functioning are:
z Regular NetScaler 9000 system shut down
z Operational errors
z If the NSLCD program is stopped by using the kill command.