Instruction manual

Chapter 2 Installation, Configuration and Management
NetScaler 9000 Series Installation and Configuration Guide - Volume 1 2-33
NSICG60_DEC04
This configuration parameter is the netmask for the subnet (network section)
into which the NetScaler 9000 system is being installed (for example,
255.255.0.0).
Enter the netmask when the following is displayed:
Netmask
-------
This specifies the netmask for the network in which the
NetScaler 9000 system is being installed.
Enter the netmask [0.0.0.0]:
8. Specifying NetScaler Time Zone
Time Zone setting allows proper display of local time.
Note: Configuring the time zone does not change the NetScaler 9000
system’s system clock.
The following is displayed:
Time Zone
---------
This sets the Time Zone
1. Press Enter to set the Time Zone
2. Press Enter key to start Time Zone setting
utility.
The Time Zone configuration utility starts.
- Use the arrow keys to navigate the menus and
the confirmation dialogs.
- Use the <Esc> key to return to the previous
menu.
3. Answer Yes to confirm that the NetScaler 9000
system’s clock is set to Coordinated Universal
Time (UTC).
4. Select your region from the regions list.
5. Select your country from the countries list.
a. If multiple time zones are displayed for your
country, select the appropriate one.
b. Confirm the abbreviation for your local time
zone.
9. Specifying the nsroot User’s Password