Instruction manual

Chapter 2 Installation, Configuration and Management
NetScaler 9000 Series Installation and Configuration Guide - Volume 1 2-35
NSICG60_DEC04
6. Advanced Network Configuration.
7. Time zone.
8. Password of the user nsroot.
9. Cancel all the changes and exit.
10. Save all the changes and exit.
Select a menu item from 1 to 10 [10]:
If you need to change a parameter, select the corresponding item number in
the menu and follow the instructions on the monitor or screen. The procedure
is the same as described previously.
Note: Menu item 9 cancels all previously specified parameters except Time
Zone and any passwords you may have modified. These changes are
applied immediately in each submenu.
11. Exiting Configuration and Starting the NetScaler 9000 system
After setting values to all the items in the menu restart the NetScaler 9000
system, by selecting the item 11 in the menu and then pressing the
<Enter> key.
The following message is displayed:
Writing configuration file to /nsconfig/ns.conf file
The system prompts a message asking the user if the user wants to reboot
the NetScaler system.
All services stops and the NetScaler 9000 system reboots. The new
configuration settings become effective after the reboot. The NetScaler
9000 system indicates whether the startup is successful.
When the login prompt is displayed, login to the NetScaler 9000 system
by using the
nsroot account.
Note: The NetScaler 9000 system’s CLI prompt (>) is displayed. This
interface allows you to issue any CLI command as described in the
NetScaler 9000 Series Command Reference.