Owner’s Manual

279
Practical information
Changing a wiper blade
Before removing a front
wiper blade
 Within one minute after switching off
the ignition, operate the wiper stalk to
position the wiper blades vertically on the
windscreen.
Removing
 Raise the corresponding wiper arm.
 Unclip the wiper blade and remove it.
Fitting
 Put the corresponding new wiper blade in
place and clip it.
 Fold down the wiper arm carefully.
After fitting a front wiper
blade
 Switch on the ignition.
 Operate the wiper stalk again to park the
wiper blades.
Very cold climate screen *
Fitting
 Offer up the very cold climate screen to
the front of the lower section of the front
bumper.
 Press around its edge to engage its fixing
clips one by one.
Removal
 Use a screwdriver as a lever to release
each fixing clip in turn.
* According to country.
Do not forget to remove the very cold climate
screen when:
- the ambient temperature exceeds 10 °C,
- towing,
- driving at speeds above 75 mph (120 km/h).
Removable protective screen which prevents
the accumulation of snow at the radiator
cooling fan.