Handbook
On-line handbook Select one of the following means of access to view your handbook on-line... Find your handbook on the CITROËN website, under "MyCITROËN". This personal and customisable space allows you to establish direct and special contact with the manufacturer.
This handbook has been designed to help you make the most of your C5 in all circumstances and in complete safety. Take the time to read through it so as to familiarise yourself with your vehicle. This handbook covers all of the variations in equipment available across the whole C5 range. Your vehicle will be fitted with only some of the equipment described in this document, depending on its trim level, version and the specification for the country in which it was sold.
Contents Overview Driving Access Remote control key Alarm Electric windows Doors Boot 44 49 52 54 57 Eco-driving Ease of use and comfort Instruments Instrument panels 14 17 Trip computer Indicators 21 Distance recorders 25 Warning and indicator lamps 26 Monochrome screen C 37 Touch screen tablet 39 60 Front seats 65 Steering wheel adjustment Mirrors 66 68 Rear seats Ventilation 70 Dual-zone digital air conditioning 72 Courtesy lamps 76 77 Interior mood lighting Panoramic sunroof (To
Contents Lighting and visibility Lighting controls Automatic illumination of headlamps Headlamp adjustment Directional lighting Wiper controls Automatic rain sensitive windscreen wipers Practical information 132 136 137 138 140 142 Technical data Fuel tank 175 Misfuel prevention (Diesel) 177 178 Snow chains 179 Energy economy mode Towing a trailer 180 182 Roof bars 183 Very cold climate protection 184 Cold climate screen Bonnet 185 186 Petrol engines 187 Diesel engines 188 Checking level
Overview Exterior (Saloon) Remote control key - opening / closing - battery Ignition switch / Steering lock / Starting Alarm 44-48 92-94 49-51 Roof bars Exterior lighting controls 132-136 Headlamp adjustment 137 Changing bulbs 218-221 - front lamps - Xenon headlamps - foglamps - direction indicator repeaters Lane departure warning system 124 Stop & Start 110-113 Very cold climate screen 184 Door mirrors Doors - opening / closing - central locking - emergency control Child lock El
Overview .
Overview Interior Side blinds 85 Rear seats Rear fittings - rear armrest - ski flap - 12 V socket... 68-69 84-85 Boot fittings (Saloon) 86 - securing rings Boot fittings (Tourer) 87 - securing rings - hooks - storage net...
Overview .
Overview Instruments and controls Central switch panels With the Audio system With the touch screen tablet 1. ASR/DSC 148-150 2. Visual and audible parking sensor system 127-128 3. Lane departure warning system 4. Central locking 5. Localised Assistance Call 124 54-55 146, 250-251 6. Localised Emergency Call 146, 250-251 8 1. Main menu for the touch screen 39-40, 257 tablet 2. Increase volume 40, 255 3. Decrease volume 40, 255 4. Central locking 5.
Overview . Side switch panel With the Audio system 1. CHECK (vehicle self-test) 2. Volumetric alarm With the touch screen tablet 20 49-51 1. CHECK (vehicle self-test) 2. Volumetric alarm 3. Parking space sensor system 125-126 3. Parking space sensor system 4. Stop & Start 110-113 4. Lane departure warning system 20 49-51 125-126 124 5. Stop & Start 110-113 6.
Overview Instruments and controls Steering mounted controls Main menu - Instrument panel screen 15-16 Trip computer 17, 19 Black Panel Fixed centred controls steering wheel 116-117 Selection of the displayed function MODE 37, 256 Exterior lighting 132-136 Automatic illumination of headlamps 146 Daytime running lamps 135 Direction indicators 145 Speed limiter Cruise control 10 Automatic rain sensitive wipers 140-143 Wash-wipe 141 Automatic wiping 142 Horn 137 118-120 121-123 258-27
Overview .
Eco-driving Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions. Optimise the use of your gearbox Control the use of your electrical equipment With a manual gearbox, move off gently and change up without waiting. During acceleration change up early. Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.
Eco-driving Limit the causes of excess consumption Observe the recommendations on maintenance Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats. Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack, bicycle carrier, trailer...). Use a roof box in preference. Remove roof bars and roof racks after use.
Instruments Instrument panels - petrol and Diesel Panel grouping together the dials and vehicle operation indicator and warning lamps. 14 A. Fuel gauge B. Indicator: ● Coolant temperature ● Cruise control/Speed limiter information F. Controls: ● Lighting dimmer ● Reset the trip mileage recorder and service indicator C. Analogue speedometer D. Rev counter E. Indicator: ● Engine oil temperature ● Gear efficiency. ● Gear selector position and gear engaged (automatic gearbox). G.
Instruments Main menu The main menu allows you to programme certain vehicle functions* and the instrument panel screen: 1 "Vehicle parameters" menu* This allows you to access the settings for certain functions, grouped by category: - Access to the vehicle. - Lighting. - Driving assistance. "Choice of language" menu This allows you to choose the display and voice recognition language. "Choice of units" menu The instrument screen A is located in the centre of the instrument panel.
Instruments Access to the vehicle Lighting Driving assistance With this menu selected, you can: F activate or deactivate the driver welcome function. For more information on Ease of use and comfort, refer to the corresponding section. F select the unlocking of all doors or just the driver's door. For more information on Access, refer to the corresponding section. F activate or deactivate the automatic operation of the electric parking brake**.
Instruments Trip computer System that gives you information on the current journey (range, fuel consumption…). 1 In the instrument panel screen Information displays F Turn the left-hand thumb wheel A on the steering wheel to display the various trip computer tabs in succession: - The current information tab is displayed in zone B of the instrument panel screen, with: ● the range, ● the current fuel consumption, ● the digital speed reading or the Stop & Start time counter.
Instruments In the touch screen tablet - The current information tab with: ● the range, ● the current fuel consumption, ● the Stop & Start time counter. - The trip "1" tab with: ● the average fuel consumption, ● the distance travelled, ● the average speed, for the first trip. Information display F Press the MENU button. F Select "Driving" to display the various tabs. F Select the desired tab using your finger.
Instruments A few definitions… Range (miles or km) The distance which can still be travelled with the fuel remaining in the tank (at the average fuel consumption seen over the last few miles (kilometres) travelled). This value may vary following a change in the style of driving or the relief, resulting in a significant change in the current fuel consumption. When the range falls below 20 miles (30 km), dashes are displayed.
Instruments Return to the main instrument panel screen display Display of navigation information in the instrument panel screen Check function Successive rotations of the left-hand thumb wheel on the steering wheel allow you to return to the main instrument panel screen display (vehicle speed), via the navigation information screen, then the screen displaying only the total mileage and the trip mileage (bottom of screen).
Instruments Indicators Engine oil temperature gauge Coolant temperature gauge Fuel gauge Under normal operating conditions, the bars should be within section 1. In severe operating conditions, the bars may extend into section 2. In this event, slow down, and if necessary, stop the engine and check the levels (see the corresponding section). Under normal operating conditions, the bars should be within section 1.
Instruments Service indicator System which informs the driver when the next service is due, in accordance with the manufacturer's service schedule. The point at which the service is due is calculated from the last service indicator reset to zero, according to the mileage covered and the time elapsed since the last service. For BlueHDi Diesel versions, depending on the country of sale, the degree of deterioration of the engine oil may also be taken into account.
Instruments Service overdue For a few seconds after the ignition is switched on, the spanner flashes to indicate that the service must be carried out as soon as possible. Example: the service is overdue by 300 miles. When the ignition is switched on, the instrument panel screen indicates: The spanner remains on alongside the mileage recorder to indicate that a service is overdue. For BlueHDi Diesel versions, the Service warning lamp also comes on when the ignition is switched on.
Instruments Engine oil level indicator The engine oil level is displayed in the instrument panel screen for a few seconds when the ignition is switched on, after the servicing information. Oil level correct Oil level incorrect The level read will only be correct if the vehicle is on level ground and the engine has been off for more than 30 minutes.
Instruments Distance recorders The total and trip distances are displayed for thirty seconds when the ignition is switched off, when the driver's door is opened and when the vehicle is locked or unlocked. Lighting dimmer Total distance recorder 1 System for manual adjustment of the brightness of the instruments and controls in relation to the exterior brightness.
Instruments Warning and indicator lamps Visual indicators which inform the driver of the occurrence of a malfunction or fault (warning lamp) or of the operation of a system (operation or deactivation indicator lamp). When the ignition is switched on Certain warning lamps come on for a few seconds when the ignition is switched on. When the engine is started, these warning lamps should go off. If they remain on, before moving off, refer to the information for the warning lamp concerned.
Instruments Warning/indicator lamp is on Cause Action / Observations STOP fixed, associated with another warning lamp. The illumination of this warning lamp is associated with a serious fault with the braking system, power steering, automatic gearbox, engine oil pressure, engine coolant temperature or a major electrical fault. Stop as soon as it is safe to do so. Park, switch off the ignition and call a CITROËN dealer or a qualified workshop. Service temporarily, accompanied by a message.
Instruments Warning/indicator lamp is on Cause Action / Observations fixed, associated with the STOP warning lamp. The braking system fluid level is too low. You must stop as soon as it is safe to do so. Top up with brake fluid recommended by CITROËN. If the problem persists, have the system checked by a CITROËN dealer or a qualified workshop. fixed, associated with the STOP and ABS warning lamps. The electronic brake force distribution (EBFD) system has a fault.
Instruments Warning/indicator lamp is on Cause Action / Observations Deactivation of the automatic functions of the electric parking brake fixed. The "automatic application" (on switching off the engine) and "automatic release" functions are deactivated or faulty. Activate the function (depending on the country of sale) via the vehicle parameters menu or contact a CITROËN dealer or a qualified workshop if automatic application / release is no longer possible.
Instruments Warning/indicator lamp + is on Cause Action / Observations Maximum coolant temperature fixed. The temperature of the cooling system is too high. Stop as soon as it is safe to do so. Wait until the engine has cooled down before toppingup the level, if necessary. If the problem persists, contact a CITROËN dealer or qualified workshop. Battery charge* fixed. The battery charging circuit has a fault (dirty or loose terminals, slack or cut alternator belt, ...).
Instruments Warning/indicator lamp is on Cause Action / Observations Low fuel level fixed. When it first comes on there remains approximately 5 litres of fuel in the tank. You must refuel as soon as possible to avoid running out of fuel. This warning lamp wil come on every time the ignition is switched on, until a sufficient addition of fuel is made. Fuel tank capacity: 71 litres. Never continue to drive until you run out of fuel, this could damage the emission control and injection systems.
Instruments Warning/indicator lamp AdBlue ® (BlueHDi Diesel) is on Cause Action / Observations fixed, on switching on the ignition, accompanied by an audible signal and a message indicating the remaining driving range. The remaining driving range is between 350 miles (600 km) and 1500 miles (2400 km). Have the AdBlue ® tank topped-up as soon as possible: go to a CITROËN dealer or a qualified workshop, or carry out this operation yourself.
Instruments Warning/indicator lamp + + SCR emissions control system (BlueHDi Diesel) is on Cause Action / Observations fixed, on switching on the ignition, associated with the SERVICE and engine diagnostic warning lamps, accompanied by an audible signal and a message. A fault with the SCR emissions control system has been detected. This alert disappears once the exhaust emissions return to normal levels.
Instruments Operation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has come into operation. It may be accompanied by an audible signal and a message in the screen. Warning/indicator lamp 34 is on Cause Action / Observations Left-hand direction indicator flashing with buzzer. The lighting stalk has been pushed down. Right-hand direction indicator flashing with buzzer. The lighting stalk has been pushed up.
Instruments Warning/indicator lamp is on Cause Action / Observations Diesel engine pre-heating fixed. The ignition switch is at the 2nd position (ignition on). Wait until the warning lamp has switched off before starting. The duration for which the warning lamp is on is determined by the climatic conditions. Parking brake fixed. The parking brake is applied. flashing. The parking brake is not fully applied or is released.
Instruments Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This is may be accompanied by an audible signal and a message in the multifunction screen. Warning/indicator lamp Passenger's front airbag 36 is on Cause Action / Observations fixed. The control, located in the glove box, is set to the OFF position. The passenger's front airbag is deactivated.
Instruments Monochrome screen C Displays in the screen Controls 1 Selection of the type of information displayed (Mode) Successive presses on the end of the wiper stalk or on the MODE button of the audio system permit selection of the type of information presented in the multifunction screen (date or audio system, CD, MP3).
Instruments Main Menu Press on the button A to view the "Main Menu" of the multifunction screen. This menu gives you access to the following functions: - audio functions, - display configuration, - telephone (Bluetooth ® hands-free kit). "Display configuration" menu With this menu selected, you have access to the following settings: - brightness - video, - date and time, - choice of units.
Instruments Touch screen tablet This system gives access to: - menus for adjusting settings for vehicle functions and systems, - audio and display settings menus, - audio system and telephone controls and the display of associated information, - the display of the exterior temperature (a blue snowflake appears if there is a risk of ice), - the display of the trip computer.
Instruments Menus Press this button on the control panel, then the menu button concerned. Navigation Depending on trim level or country of sale, navigation may be unavailable, optional or standard. For more information on Audio and telematics, refer to the corresponding section. Radio Media For more information on Audio and telematics, refer to the corresponding section. Settings Allows configuration of the display and the system.
Instruments "Driving" menu The systems with settings that can be adjusted are detailed in the table below. Button Corresponding function Comments Vehicle settings Access to other functions with settings that can be adjusted. The functions are grouped together under three tabs: - "Driving assistance" ● "Parking sensors" (Audible and visual parking assistance). For more information on the Parking sensors, refer to the corresponding section.
Instruments "Settings" menu The functions accessible in this menu are given in the table below. Button 42 Corresponding function Comments Audio settings Adjustment of volume, balance... Turn off screen Turns off the display in the touch screen tablet (black screen). Pressing the black screen (or the MENU button) restores the display. Time/Date Setting the date and time. Screen settings Adjustment of the display settings (scrolling of text, animations...) and the screen brightness.
Instruments 1 Setting the date and time F Select the "Settings" menu. F Select "Adjust time" or "Adjust date". F In the secondary page, press on "Time/ Date". F Modify the settings using the number keypad, then confirm. F Press "Confirm" to save and quit. When setting the time, you can select "Satellite synchronisation", so that the time is adjusted automatically by satellite reception.
Access Remote control key System which permits central unlocking or locking of the vehicle using the lock or from a distance. It is also used to open the boot, locate and start the vehicle, as well as providing protection against theft. Unfolding / Folding the key Unlocking the vehicle Complete unlocking using the remote control F Press the open padlock to unlock the vehicle. Complete unlocking using the key F Turn the key in the driver's door lock towards the front of the vehicle to unlock it.
Access Locking the vehicle Boot Normal locking using the remote control Manual boot F Press this button for more than one second to unlock and release the boot. Motorised boot F Press this button for more than one second to unlock and and trigger the automatic opening of the boot. F Press the closed padlock to lock the vehicle. F Press the closed padlock for more than two seconds to close the windows and sunroof automatically in addition to locking.
Access Deadlocking Using the remote control F Press the closed padlock to lock the vehicle or press the closed padlock for more than two seconds to close the windows and sunroof automatically in addition to locking. Using the key F Turn the key in the driver's door lock to the rear of the vehicle to lock it and hold it in this position for more than two seconds to close the windows and sunroof automatically in addition to locking.
Access Locating your vehicle Operating problem F Press the closed padlock to locate your locked vehicle in a car park. This is indicated by switching on of the interior lighting and flashing of the direction indicators for a few seconds. The vehicle remains locked. Following disconnection of the vehicle battery, replacement of the remote control battery or in the event of a remote control fault, you can no longer unlock, lock or locate your vehicle.
Access Lost keys Go to a CITROËN dealer with the vehicle's registration document, your personal identification documents and if possible the key code label. The CITROËN dealer will be able to look up the key code and the transponder code required to order a new key. Remote control The high frequency remote control is a sensitive system; do not operate it while it is in your pocket as there is a possibility that it may unlock the vehicle, without you being aware of it.
Access Alarm* System which protects and provides a deterrent against theft and break-ins. It provides the following types of monitoring: - exterior perimeter The system checks for opening of the vehicle. The alarm is triggered if anyone tries to open a door, the boot, the bonnet... - interior volumetric The system checks for any variation in the volume in the passenger compartment. The alarm is triggered if anyone breaks a window, enters the passenger compartment or moves inside the vehicle.
Access Deactivation F Press the unlocking button on the remote control. The alarm system is deactivated: the indicator lamp in the button goes off. Locking the vehicle with exterior perimeter monitoring only Deactivate the interior volumetric and anti-tilt monitoring to avoid unwanted triggering of the alarm in certain cases such as: - leaving a pet in the vehicle, - leaving a window partially open, - washing your vehicle, - changing a wheel, - having your vehicle towed, - transport by sea.
Access Triggering of the alarm Failure of the remote control Operating fault This is indicated by sounding of the siren and flashing of the direction indicators for thirty seconds. The monitoring functions remain active until the alarm has been triggered eleven times in succession. When the vehicle is unlocked using the remote control, rapid flashing of the indicator lamp in the button informs you that the alarm was triggered during your absence.
Access Electric windows One-touch electric windows There are two options: - manual mode F Press or pull the control gently, without passing the point of resistance. The window stops when the control is released. 1. 2. 3. 4. 5. Driver's electric window control. Passenger's electric window control. Rear right electric window control. Rear left electric window control. Deactivation of the rear electric window and door controls.
Access Reinitialisation If a window does not rise automatically, its operation must be reinitialised: F pull the control until the window stops, F release the control and pull it again until the window closes fully, F continue to hold the control for approximately one second after the window has closed, F press the control to lower the window automatically to the low position, F when the window has reached the low position, press the control again for approximately one second.
Access Doors Opening From outside From inside F After unlocking the vehicle completely using the remote control or the key, pull the door handle. F Pull the interior control lever of a front door; this unlocks the vehicle completely. When the selective unlocking is activated, the first press of the remote control unlocking button permits unlocking of the driver's door only. 54 Manual central locking System which provides full manual locking or unlocking of the doors and boot from the inside.
Access Automatic central locking Unlocking F Press button A again to unlock the vehicle. The red indicator lamp on the button switches off. System which provides full automatic locking or unlocking of the doors and the boot while driving. You can activate or deactivate this function. Unlocking 2 F Above 6 mph (10 km/h), press button A to unlock the doors and the boot temporarily.
Access Back-up control System allowing the doors to be locked and unlocked manually in the event of a malfunction of the central locking system or battery failure. Locking the driver's door F Insert the key in the door lock, then turn it to the rear. You can also apply the procedure described for the passenger doors. Unlocking the driver's door F Insert the key in the door lock, then turn it to the front. 56 Locking the passenger doors Unlocking the passenger doors F Open the doors.
Access Boot (Saloon) Opening Locking/unlocking Emergency boot release With the vehicle stationary, this is carried out using: - The remote control. - The key in a door lock. - The interior central locking/ unlocking control. System for mechanical unlocking of the boot in the event of a battery or central locking malfunction. 2 The boot automatically locks when the vehicle is moving at a speed of over 6 mph (10 km/h), even if automatic central locking is deactivated.
Access Boot (Tourer) Manual opening Motorised opening Manual closing F Lower the tailgate using the interior handle C. F Press upwards on lever A and lift up the tailgate. F Press upwards on lever A, or press of more than one second on button B of the remote control. Do not attempt to help the opening of the tailgate manually after pressing the control A. 58 Motorised closing F Press the push-button D to close the tailgate.
Access Locking/unlocking With the vehicle stationary, this is carried out using: - The remote control. - The key in a door lock. - The interior central locking/ unlocking control. The boot automatically locks when the vehicle is moving at a speed of over 6 mph (10 km/h), even if automatic central locking is deactivated. It is unlocked when a door is opened or when the central locking button is pressed (at a speed of less than 6 mph (10 km/h)).
Ease of use and comfort Front seats Seat consisting of a seat cushion, seat back and head restraint which can all be adjusted for optimum driving comfort. Manual adjustments 1. Adjustments to the height and angle of the head restraint To raise it, pull upwards. To lower it, press on the release button A and simultaneously on the head restraint itself. The adjustment is correct when the top edge of the head restraint is at the same height as the top of the head. It is also tilt adjustable.
Ease of use and comfort Electric adjustments 3 To adjust the electric seats, switch on the ignition or start the engine if the vehicle has gone into economy mode. Seat adjustments are also possible for a short period after opening one of the front doors or switching off the ignition. 1. Adjustment of the seat height and angle, and longitudinal position Raise or lower the front of the control to adjust the seat cushion angle. Raise or lower the rear of the control to raise or lower the seat.
Ease of use and comfort Head restraint height and angle adjustments (electric seats) F To adjust the angle of the head restraint, push back or pull forward section B of the head restraint until you reach the desired position. F To raise it, pull upwards. F To lower it, press on the control C to release it, and simultaneously on the head restraint itself. F To remove it, press on the control C to release it, then pull it upwards.
Ease of use and comfort Massage function This function provides the driver with a back massage. It only operates when the engine is running. F Press on button A. The warning lamp comes on and the massage function is activated for a period of 1 hour. During this time, massage is performed in cycles of 6 minutes (4 minutes of massage followed by 2 minutes break). In total, the system will perform 10 cycles. After 1 hour, the function is deactivated. The warning lamp goes out.
Ease of use and comfort Storing driving positions System which stores the settings of the driver's seat. It allows two positions to be stored. Use the buttons located on the door, driver's side. When storing a driving position, the air conditioning settings are also memorised. For more information on Dual-zone automatic air conditioning, refer to the corresponding section.
Ease of use and comfort Steering wheel adjustment The steering wheel can be adjusted for height and reach to adapt the driving position to the size of the driver. Adjustment As a safety precaution, these operations must only be carried out while the vehicle is stationary. 3 F First, adjust the driver's seat to the most suitable position. F When stationary, lower the lever A to release the steering wheel adjustment. F Adjust for height and reach.
Ease of use and comfort Mirrors Door mirrors Each fitted with an adjustable mirror glass providing the lateral rearward vision necessary for overtaking or parking. They can also be folded. As a safety measure, the mirrors must be adjusted to reduce the blind spot. Adjustment Folding With the ignition on: F move control A to the right or to the left to select the corresponding mirror, F move control B in all four directions to adjust, F return control A to the central position.
Ease of use and comfort Rear view mirror Equipped with an anti-dazzle system, which darkens the mirror glass and reduces the nuisance to the driver caused by the sun, headlamps from other vehicles... Manual model 3 Electrochrome (automatic day/ night) model In vehicles fitted with electrochrome door mirrors, the system has an on/off button and an associated warning lamp. Adjustment F Adjust the mirror so that the glass is directed correctly in the "day" position.
Ease of use and comfort Rear seats Bench seat, the left-hand (2/3) or right-hand (1/3) section of which can be folded to adapt the boot load space. Rear head restraints The rear head restraints can be removed and have two positions: - high, position for use, - low, storage position. To raise a head restraint, pull it upwards. To lower it, press the lug then the head restraint. To remove it, place it in the high position, push the lug and pull it upwards.
Ease of use and comfort Returning the seat backrest to its original position Removing the seat cushion 3 F Put the seat backrest 3 into the fully upright position and secure it. F Return the seat cushion 1 to its original position. F Refit the head restraints or put them back in place. The red indicator on the control 2 should no longer be visible; if it is, push the seat backrest 3 fully back.
Ease of use and comfort Ventilation A. Sunshine sensor. B. Soft air diffusion grille. The soft air diffusion grille located in the centre of the dashboard provides optimum distribution of the air for the front seats. This system eliminates unpleasant air currents while maintaining an optimum temperature in the passenger compartment. To open the soft air diffusion grille, turn the wheel upwards. To close the soft air diffusion grille, turn the wheel fully downwards.
Ease of use and comfort Recommendations for ventilation and air conditioning In order for these systems to be fully effective, follow the operation and maintenance guidelines below: F To obtain an even air distribution, take care not to obstruct the exterior air intake grilles located at the base of the windscreen, the nozzles, the vents and the air outlets, as well as the air extractor located in the boot.
Ease of use and comfort Digital air conditioning (dual-zone) The air conditioning system operates with the engine running. Dual-zone: this is the independent regulation of the temperature and air distribution on the driver's side and the front passenger's side. The driver and front passenger can each adjust the temperature and the air distribution to suit their requirements. The symbols and messages associated with the digital air conditioning controls appear in the display screen. 1a-1b.
Ease of use and comfort 2a-2b. Temperature adjustment F Turn control 2a to change the temperature on the driver's side and control 2b to change the temperature on the passenger's side: to the right to increase or to the left to reduce it. The setting required is displayed. The value indicated on the display corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit, depending on the screen configuration. A setting around the value 21 usually provides optimum comfort.
Ease of use and comfort 5. Air flow adjustment F Press the control: - to increase the air flow, - to reduce the air flow. The air flow level is indicated by the progressive illumination of the fan blade indicator lamps. Reducing the air flow to minimum switches the air conditioning system OFF. To prevent condensation and deterioration of the quality of the air in the passenger compartment, ensure that an adequate flow of air is maintained. 6.
Ease of use and comfort 8. Rear demisting / defrosting The heated rear screen operates independently of the air conditioning system. F Press control 8, with the engine running, to demist the rear screen and the mirrors. The indicator lamp comes on. Demisting is switched off automatically to avoid excessive consumption of current and depending on the exterior temperature. It may be stopped by pressing control 8 again or when the engine is switched off.
Ease of use and comfort Courtesy lamps Map reading lamps Front courtesy lamp In this position, the courtesy lamp comes on gradually: - - - - 1. Front courtesy lamp 2. Map reading lamps when the vehicle is unlocked, when a door is opened, when the key is removed from the ignition, when the remote control locking button is activated, in order to locate your vehicle. F With the ignition on, press the corresponding switch.
Ease of use and comfort Interior mood lighting Your vehicle is equipped with interior mood lighting for the centre console and the door handles. Central console Lighting for door opening controls The lamps are located on the roof console, near the front interior lamp. They illuminate the central console. 3 Operation These lamps are activated with the automatic illumination of headlamps, when the ambient light is poor. They are deactivated when the instrument panel is off.
Ease of use and comfort Welcome lighting The welcome lighting is made up of: - The interior (roof) lamps. - The floor lighting. - The pavement lighting when a door is open. 78 Floor lighting Pavement lighting In the front of the vehicle, when a door is opened, this illuminates the interior of the vehicle. With the door open, this illuminates the ground next to the vehicle.
Ease of use and comfort Panoramic sunroof (Tourer) Sequential electric blind 3 This comprises a tinted glass panoramic area 1 to improve brightness and vision in the passenger compartment. It is fitted with an electric blind 2 to help maintain a comfortable temperature and reduce noise. Opening Closing F Press control A. Pressing to the 1st notch allows you to open the blind step by step. Pressing to the 2nd notch allows you to fully open the blind.
Ease of use and comfort Anti-pinch If the blind meets an obstacle whilst closing, it stops and opens partially again. You must re-initialise the anti-pinch function within 5 seconds of the blind stopping: F press control B until the blind is fully closed (closing in steps of a few centimetres).
Ease of use and comfort Front fittings Sun visor Cooled glove box Driver's storage compartment 3 F With the ignition on, lift the flap; the mirror is illuminated automatically. To prevent dazzle from ahead, fold the visor downwards. It can be disengaged from its central fixing and pivoted over to the side windows if required. F To open the glove box, pull the handle and lower the lid. It has automatic illumination. The glove box has an air vent A that can be closed manually.
Ease of use and comfort Mats Mats are provided for the driver and front passenger. Removing F Slide the front seat back as far as possible. F Unclip the fixings. F Remove the fixings, then the mat. Refitting F Position the mat correctly. F Clip the fixings. F Check that the mat is held is place correctly. F Return the front seat to its original position.
Ease of use and comfort Front armrest Comfort and storage system for the driver and front passenger. The management of these files is with the steering mounted controls or from the audio system. When connected to the USB port, the portable device is recharged automatically. While charging, a message is displayed if the power consumption of the portable device exceeds the rating of the vehicle's port.
Ease of use and comfort Rear fittings Rear armrest 12 V accessory socket Comfort and storage system for the rear passengers. 84 Cup-holder Storage The rear cup-holder A is located in the rear central armrest. F Lower the rear armrest. F Pull forwards to extract the cup-holder. F Lift up the upper part of the rear central armrest to access storage space B. This is located in the rear ashtray. Max power: 100 W.
Ease of use and comfort Ski flap Side blinds Rear blind (Saloon) 3 A flap in the backrest, located to the rear of the armrest, facilitates the carrying of long objects. F Pull the tab A to unreel the blind. F Position the blind on the hook B. F Pull the tab C to unreel the blind. F Position the blind on the hooks D. To open F F F F Lower the rear armrest. Pull the flap handle down. Lower the flap. Load the objects from inside the boot.
Ease of use and comfort Boot fittings (Saloon) Luggage securing rings F Use the 4 securing rings on the boot floor to secure your luggage. For safety reasons in the event of sharp braking, you are advised to place heavy objects as far forward in the boot as possible. 1. Boot floor (storage for the spare wheel and the tools) 86 2. Boot lamp 3. Open storage or Closed storage well For vehicles so equipped, this is the location for the Hi-Fi amplifier.
Ease of use and comfort Boot fittings (Tourer) 3 1. 2. 3. Hook For shopping bags. Torch To recharge, return it to its housing. Storage net 1. 2. Luggage cover (see details on following page) Luggage securing rings Use the 4 securing rings provided on the boot floor to secure your loads. As a safety measure in the event of sharp braking, you are advised to place heavy objects as far forwards as possible. 1. Boot lamp 2.
Ease of use and comfort Luggage cover (Tourer) 88 To reel in To remove To install F Press the handle (PRESS) gently. The luggage cover reels in automatically. The moving part A can be folded along the rear bench seat backrest. F Compress the control 1 and lift the luggage cover on the right then on the left to remove it. F Position the left-hand end of the luggage cover roller in its location B behind the rear bench seat.
Ease of use and comfort High load retaining net (Tourer) 3 Hooked onto the special upper and lower fixings, this permits use of the entire loading volume up to the roof: - behind the rear seats (row 2), - behind the front seats (row 1) when the rear seats are folded. When positioning the net, check that the strap loops are visible from the boot; this will make slackening or tightening easier. Installation F Fold down the backrests of the rear seats.
Ease of use and comfort 90 Row 1 Row 2 To use it in row 1: F fold down the backrests of the rear seats, F open the covers 3 of the corresponding upper fixings, F unroll the high load retaining net and position one of the ends of the net's metal bar in the corresponding fixing cover. Check that the hook is secured in the rail located inside the cover 3, F pull the high load retaining net's metal bar to position the other hook in the second fixing cover.
Driving Driving recommendations Observe the driving regulations and remain vigilant whatever the traffic conditions. Pay close attention to the traffic and keep your hands on the wheel so that you are ready to react at any time to any eventuality. On a long journey, a break every two hours is strongly recommended. In difficult weather, drive smoothly, anticipate the need to brake and increase the distance from other vehicles.
Driving Starting-switching off the engine Anti-theft protection Ignition switch Electronic engine immobiliser Ignition on position The key contains an electronic chip which has a special code. When the ignition is switched on, this code must be recognised in order for starting to be possible. It allows the use of the vehicle's electric equipment or portable devices to be charged.
Driving Starting the engine With the parking brake applied and the gearbox in neutral or position N or P: F depress the clutch pedal fully (manual gearbox), or F press the brake pedal firmly (automatic gearbox), F insert the key into the ignition switch; the system recognises the code, F unlock the steering column by simultaneously turning the steering and the key. In certain cases, you may have to apply more force to the steering (wheels on full lock, for example).
Driving Switching off the engine F Stop the vehicle. F With the engine running at idle, turn the key to position 1. F Remove the key from the ignition switch. F To lock the steering column, turn the steering until it locks. To facilitate unlocking of the steering column, it is recommended that the wheels be returned to the straight ahead position before switching off the engine. F Check that the parking brake is correctly applied, particularly on sloping ground.
Driving Manual parking brake Mechanical device for immobilising the vehicle when stationary. 4 Application Release F Pull the parking brake lever up to immobilise your vehicle. To facilitate the action on the lever, you are recommended to press the brake pedal at the same time. F Press on the end of the lever whilst pulling it then lower it fully. In all circumstances, as a precautionary measure, engage first gear. On steep gradients, turn the steering wheel towards the pavement.
Driving Electric parking brake Automatic operation Application with the engine off Application with the engine running With the vehicle stationary, the parking brake is automatically applied when the engine is switched off. The application of the parking brake is confirmed by: With the engine running and the vehicle stationary, in order to immobilise the vehicle you need to manually apply the parking brake by pulling the control lever A.
Driving Release The electric parking brake releases automatically and progressively as the vehicle moves off: F with a manual gearbox (first gear or reverse gear engaged), press down fully on the clutch pedal, then press on the accelerator pedal and move off, F with an automatic gearbox, accelerate with the selector in position D, M or R.
Driving Manual operation Manual application / release of the parking brake is always possible. Application Release With the vehicle stationary, to apply the parking brake whether the engine is running or off, pull the control lever A. With the ignition on or the engine running, to release the parking brake, press on the brake pedal, push then release control lever A.
Driving Maximum application Particular situations If necessary, you can make a maximum application of the parking brake. It is obtained by means of a long pull on control lever A, until you see the message "Max application of the parking brake" and an audible signal is heard.
Driving Dynamic emergency braking If a failure of the DSC system is signalled by the illumination of this warning lamp, then braking stability is not guaranteed. In this event, stability must be assured by the driver by repeating alternate "pull - release" actions on control lever A. In the event of a failure of the vehicle’s main braking system or in an exceptional situation (e.g. driver taken ill, under instruction) pull and hold control lever A to stop the vehicle.
Driving Operating faults If any of these instances arises, contact a CITROËN dealer or a qualified workshop as soon as possible. SITUATION CONSEQUENCES Electric parking brake problem and display of the message "Parking brake faulty" and of the following warning lamps: If the electric parking brake problem warning lamp and the service warning lamp come on, position the vehicle in a safe location (on flat ground, with a gear engaged).
Driving 4 5 SITUATION CONSEQUENCES Display of the messages "Parking brake faulty" and "Anti roll-back fault" and of the following warning lamps: - The automatic functions are deactivated. - The hill start assist is not available. To apply the electric parking brake: F Immobilise the vehicle and switch off the ignition. F Pull the control lever for at least 5 seconds or until maximum application. F Switch on the ignition and check that the electric parking brake warning lamps are on.
Driving Hill start assist System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time to move your foot from the brake pedal to the accelerator pedal. This function is only active when: - the vehicle is completely stationary, with your foot on the brake pedal, - in certain conditions on a gradient, - with the driver’s door closed. The hill start assist function cannot be deactivated.
Driving 6-speed manual gearbox Engaging 5th or 6th gear Engaging reverse gear F Move the lever fully to the right to engage 5th or 6th gear. Failure to follow this advice may cause permanent damage to the gearbox (engagement of 3rd or 4th gear by mistake). F Raise the ring under the knob and move the gear lever to the left then forwards. Only engage reverse gear when the vehicle is stationary with the engine at idle.
Driving Automatic gearbox Mode selection Automatic gearbox which offers a choice between the comfort of fully automatic operation, enhanced by the sport and snow programmes, or manual gear changing.
Driving Moving off F To start the engine, the gear selector must be in position P or N. F Operate the starter. F When the engine is running, place the gear selector at R, D or M. F Check in the instrument panel, the position engaged. F Release the brake pedal and accelerate. F To avoid a possible difference between the position of the gear selector and the actual position of the gearbox, always come out of position P with the ignition on and brake pedal applied.
Driving Automatic operation Manual operation For certain manoeuvres (for example overtaking), you can obtain maximum acceleration by pressing the accelerator pedal hard down past the point of resistance, which then produces an automatic change down to a lower gear. F Move the gear selector to position D. The gearbox continuously selects the gear that is best suited to the following conditions: - driving style, - road profile, - vehicle load.
Driving SPORT and SNOW programmes SNOW programme "T" F With the gear selector in position D and the engine running, press button B. The gearbox adapts to driving on slippery roads. This programme makes moving off easier and improves traction in conditions of poor grip. T appears in the instrument panel. These two special programmes supplement the automatic operation in very particular conditions of use. SPORT programme "S" F With the gear selector in position D and the engine running, press button A.
Driving Gear shift indicator* System which reduces fuel consumption by recommending the most appropriate gear. Operation Depending on the driving situation and your vehicle's equipment, the system may advise you to skip one (or more) gear(s). You can follow this instruction without engaging the intermediate gears. The gear engagement recommendations must not be considered compulsory.
Driving Stop & Start The Stop & Start system puts the engine temporarily into standby - STOP mode - during stops in the traffic (red lights, traffic jams...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Driving Special cases: STOP mode unavailable STOP mode is not invoked when: - the vehicle is on a steep slope (up or down), - the driver's door is open, - the driver's seat belt is not fastened, - the vehicle has not exceeded 6 mph (10 km/h) since the last engine start using the key, - the electric parking brake is applied or being applied, - the engine is needed to maintain a comfortable temperature in the passenger compartment, - demisting is active, - some special conditions (battery charge, eng
Driving Deactivation / Manual reactivation At any time, press the "ECO OFF" switch to deactivate the system. This is confirmed by the switch warning lamp coming on, accompanied by the display of a message. Press the "ECO OFF" switch again. In certain circumstances, such as the need to maintain a comfortable temperature in the passenger compartment, it may be useful to deactivate the Stop & Start system. The system can be deactivated at any time, once the ignition is on.
Driving Operating fault In the event of a malfunction with the system, the "ECO OFF" switch warning lamp flashes for a few seconds, then comes on continuously. Have it checked by a CITROËN dealer or a qualified workshop. In the event of a fault in STOP mode, the vehicle may stall. All of the instrument panel warning lamps come on. Depending on version, an alert message may also be displayed asking you to put the gear selector into position N and to put your foot on the brake pedal.
Driving Tyre under-inflation detection The tyre under-inflation detection system is an aid to driving which does not replace the need for vigilance on the part of the driver. System which automatically checks the pressures of the tyres while driving. The system continuously monitors the pressures of the four tyres, as soon as the vehicle is moving. Pressure sensors are located in the valve of each tyre (except the spare wheel).
Driving Operating fault Under-inflation alert The alert is given by the fixed illumination of this warning lamp, accompanied by an audible signal, and depending on equipment, the display of a message. In the event of a problem on one of the tyres, the symbol or the message appears, depending on equipment, to identify it. F Reduce speed immediately, avoid sudden steering movements or harsh brake applications. F Stop as soon as it is safe to do so.
Driving Fixed centred controls steering wheel 1 2 3 4 ● ● ● Scroll the various pages of information in the instrument panel screen. Move through the various menus in the instrument panel screen. Increase / Decrease values. Short press ● ● Open the main menu in the instrument panel screen (only when stationary). Select and confirm information. Long press Reset the trip data for the trip selected (if the corresponding trip computer page is displayed).
Driving Rotate 12 Short press 13 ● ● ● Radio: Scroll the pre-set stations. CD / MP3 / jukebox: Scroll through tracks or folders. Multifunction screen menus: Move and increase / decrease. ● ● Multifunction screen menus: confirm the selection. Open the short-cut menus (depending on the page displayed in the multifunction screen). ● Cancel the current operation and return to the previous display in the multifunction screen. Reject an incoming call.
Driving Speed limiter System which prevents the vehicle from exceeding the speed programmed by the driver. When the limit speed is reached, the accelerator pedal no longer has any effect. The speed limiter is switched on manually: a speed of at least 20 mph (approx. 30 km/h) must be programmed. The speed limiter can in no circumstances replace keeping to speed limits or the need for vigilance on the part of the driver.
Driving Programming F Press button 4 to select "LIMIT" speed limiter mode. The selection is confirmed by the display of the "LIMIT" function in zone A of the instrument panel. When the function is selected, the last memorised speed and the information "PAUSE" are displayed. With the engine running, you can adjust the memorised maximum speed, displayed in zone A, by pressing: F Button 1 to increase the memorised maximum speed. F Button 2 to decrease the memorised maximum speed.
Driving Exceeding the programmed speed The accelerator pedal has a stiff point at the end of its travel. To exceed the maximum speed setting at any time, you can press the pedal all the way down. While the speed is being exceeded, the speed displayed in zone A will flash. Simply release the accelerator pedal to return below the maximum speed and restore the limiter function. The speed will also flash if the speed limiter is not able to prevent the vehicle from exceeding the programmed speed setting (e.g.
Driving Cruise control System which automatically maintains the vehicle speed programmed by the driver, without any action on the accelerator pedal. The cruise control is switched on manually: the vehicle speed must be at least 25 mph (40 km/h) and you must be in at least: - 4th gear for a manual gearbox, - 2nd gear for an automatic gearbox. Steering mounted controls Displays in the instrument panel The information related to the cruise control is grouped together in zone A of the instrument panel.
Driving Programming Adjusting the memorised speed while the cruise control is in operation F Press button 4 to select "CRUISE" cruise control mode. The selection is confirmed by the display of the "CRUISE" function in zone A of the instrument panel. When the function is selected, no cruising speed has yet been memorised. Once the desired speed has been reached using the accelerator, press button 1 or 2. The cruising speed is then memorised and cruise control is activated.
Driving Pause / Resume Reactivation Operating fault - If there is a fault, a message is displayed accompanied by an audible signal and illumination of the SERVICE warning lamp. Have it checked by a CITROËN dealer or a qualified workshop. F Either by pressing the brake or clutch pedal. F Or by pressing button 3. F Or by the DSC or ASR systems being active. For vehicles with a manual gearbox, cruise control is deactivated if the gear lever is in neutral.
Driving Lane departure warning system System which detects the involuntary crossing of longitudinal traffic lane markings on the ground (solid or broken line). Sensors, fitted below the front bumper, trigger a warning if the vehicle drifts over a lane marking (speed higher than 50 mph (80 km/h)). This system is particularly useful on motorways and main roads. The lane departure warning system cannot in any circumstances replace the need for vigilance on the part of the driver.
Driving Parking space sensors 4 System which measures the parking space available between two vehicles or obstacles. It measures the size of the space and gives you information on: - the possibility of fitting into a free space, depending on the dimensions of your vehicle and the distances necessary for your manoeuvres, - the level of difficulty of the manoeuvre to be performed. The system does not measure spaces which are clearly much smaller or larger than the size of the vehicle.
Driving Operation You have identified a parking space: F Press button A to select the system. F Activate the direction indicator on the side where the space is to be measured. F During measurement, go forward the length of the space, at a speed less than 12 mph (approx. 20 km/h), to prepare for your manoeuvre. The system displays the following types of message: Parking YES The system then measures the size of the space.
Driving Parking sensors This system detects any obstacle (person, vehicle, tree, barrier...) located in front of or behind the vehicle, however, it will not be able to detect obstacles located immediately below the bumper. An object, such as a stake, a roadworks cone or any other similar object may be detected at the start of the manoeuvre but may no longer be detected when the vehicle moves nearer to it.
Driving Reactivation Deactivation With the control on the dashboard F Press control A again to reactivate the system. This is confirmed by the indicator lamp in the control going off. With the touch screen tablet With the control on the dashboard F Press control A to deactivate the system. This is confirmed by the illumination of the indicator lamp in the control.
Driving Reversing camera (Tourer) 4 A reversing camera is activated automatically when reverse gear is engaged. The image is displayed in the navigation screen. This system is a driving aid that does not replace the need for vigilance on the part of the driver, who must retain control of their vehicle at all times. The space between the blue lines represents the width of your vehicle except for the door mirrors. Clean the reversing camera regularly using a sponge and a soft cloth.
Driving "Hydractive III +" electronic suspension Display in the instrument panel Vehicle positions The suspension mode selected is displayed in the instrument panel screen. Normal mode The suspension automatically and instantly adjusts to different driving styles and to the profile of the road, providing the best compromise between occupant comfort and vehicle road holding.
Driving Request not granted High position Normal position Changing a wheel (not possible if speed > 6 mph (10 km/h)). If the speed authorised for a particular position is exceeded, the vehicle reverts automatically to the normal position. Mid-high position Low position For increased ground clearance (not possible if speed > 25 mph (40 km/h)). For use on difficult roads when travelling at reduced speed, as well as on car park ramps. To facilitate loading or unloading the vehicle.
Lighting and visibility Exterior lighting controls Control stalk for the selection and control of the various front and rear lamps providing the vehicle's lighting.
Lighting and visibility Manual controls Displays A. Main lighting mode selection ring: turn it to position the symbol required facing the mark. Lighting off (ignition off) / Daytime running lamps (engine running). Automatic illumination of headlamps. The lighting is controlled directly by the driver by means of the ring A and the stalk B. Illumination of the corresponding indicator lamp in the instrument panel confirms that the lighting selected is on. C. Foglamps selection ring.
Lighting and visibility Front and rear foglamps - 1st turn forwards: front foglamps on. - 2nd turn forwards: rear foglamps on. - 1st turn rearwards: rear foglamps off. - 2nd turn rearwards: front foglamps off. 134 In good or rainy weather, both day and night, use of the front and rear foglamps is prohibited. In these situations, the power of their beams may dazzle other drivers. They should only be used in fog or falling snow.
Lighting and visibility Daytime running lamps Manual guide-me-home lighting These special lamps, located at the front, make the vehicle more visible by day. The temporary illumination of the dipped beam headlamps after the vehicle's ignition has been switched off makes the driver's exit easier when the light is poor. They come on automatically and stay on, when the engine is running and when the lighting control stalk is at position 0 or AUTO.
Lighting and visibility Automatic illumination of headlamps The sidelamps and dipped beam headlamps are switched on automatically, without any action on the part of the driver, when a low level of external light is detected or in certain cases of activation of the windscreen wipers. As soon as the brightness returns to a sufficient level or after the windscreen wipers are switched off, the lamps are switched off automatically. Activation F Turn ring A to the "AUTO" position.
Lighting and visibility Manual headlamp adjustment Automatic adjustment of directional headlamps If a fault occurs, this warning lamp comes on in the instrument panel, accompanied by an audible signal and a message in the instrument panel screen. The system then places your headlamps in the lowest position. To avoid dazzling other road users, the height of the halogen bulb headlamps must be adjusted according to the load in the vehicle. 0. 1 or 2 people in the front seats. -. 3 people. 1. 5 people.
Lighting and visibility Directional lighting "Cornering lighting" function With dipped or main beams, this function provides additional lighting for the inside of a bend, when the vehicle speed is below 25 mph (approx 40 km/h). This lighting is most useful when travelling at low and medium speed (urban driving, winding road, junctions, parking manoeuvres...).
Lighting and visibility "Directional headlamps" function When the dipped or main beam headlamps are on, this function, associated with the "Cornering lighting" function, enables the light beam to follow the direction of the road. The use of this function, linked with the xenon headlamps only, considerably improves the quality of your lighting when cornering. Operating fault If a fault occurs, this warning lamp flashes in the instrument panel, accompanied by a message in the display screen.
Lighting and visibility Wiper controls The vehicle's front and rear wipers are designed to improve the driver's visibility progressively according to the weather conditions. Programming You can modify the settings for the following functions: - automatic rain sensitive windscreen wipers, - rear wiping on engaging reverse gear. Manual controls Windscreen wipers A. Wiping speed selection stalk. Fast (heavy rain). Normal (moderate rain). Intermittent (proportional to the speed of the vehicle). Off.
Lighting and visibility Windscreen and headlamp wash Rear wiper (Tourer) B. rear wiper selection ring: park, intermittent wipe, wash-wipe (set duration). If a significant accumulation of snow or ice is present, or when using a tailgate bicycle carrier, deactivate the automatic rear wiper via the vehicle parameters menu. F Pull the windscreen wiper stalk towards you. The windscreen wash then the windscreen wipers operate for a fixed period.
Lighting and visibility Automatic rain sensitive windscreen wipers The windscreen wipers operate automatically, without any action on the part of the driver, if rain is detected (sensor behind the rear view mirror), adapting their speed to the intensity of the rainfall. Switching off Operating fault This is controlled manually by the driver by moving stalk A upwards and returning it to position "0". It is accompanied by a message in the instrument panel screen.
Lighting and visibility Special position of the windscreen wipers To maintain the effectiveness of the flat wiper blades, it is advisable to: - handle them with care, - clean them regularly using soapy water, - avoid using them to retain cardboard on the windscreen, - replace them at the first signs of wear. This position permits release of the windscreen wiper blades. It is used for cleaning or replacement of the wiper blades.
Safety General safety recommendations Labels are applied at various points on your vehicle. They carry safety warnings as well as vehicle identification information. Do not remove them: they form an integral part of your vehicle.
Safety Direction indicators Selection of the left or right direction indicators to signal a change of direction of the vehicle. Hazard warning lamps Visual warning with all of the direction indicators flashing to alert other road users to a vehicle breakdown, towing or accident. Automatic operation When braking in an emergency, depending on the rate of deceleration, the lamps come on automatically. They switch off automatically the first time you accelerate.
Safety Horn Audible warning to alert other road users to an imminent danger. F Press the left or right-hand part of the fixed centred controls steering wheel. Emergency or assistance call This system allows you to make an emergency or assistance call to the emergency services or to the dedicated CITROËN service. For more information on Audio and telematics and in particular the use of this equipment, refer to the corresponding section.
Safety Braking assistance systems Group of supplementary systems which help you to obtain optimum braking in complete safety in emergency situations: - anti-lock braking system (ABS), - electronic brake force distribution (EBFD), - emergency braking assistance (EBA). Anti-lock braking system and electronic brake force distribution Linked systems which improve the stability and manoeuvrability of your vehicle when braking, in particular on poor or slippery surfaces.
Safety Trajectory control systems Anti-slip regulation (ASR) and dynamic stability control (DSC) The anti-slip regulation (also known as traction control) optimises traction to prevent skidding of the wheels, by acting on the brakes of the driving wheels and on the engine. The electronic stability control acts on the brake of one or more wheels and on the engine to keep the vehicle on the trajectory required by the driver, within the limits of the laws of physics.
Safety Deactivation In exceptional conditions (starting a vehicle which is bogged down, stuck in snow, on soft ground...), it may be advisable to deactivate the DSC and ASR, so that the wheels can turn freely and regain grip. Reactivation Reactivate the systems as soon as the level of grip permits. F Press this button. The indicator lamp in the button comes on. The DSC and ASR systems no longer act on the operation of the engine and on the brakes in the event of a involuntary change of trajectory.
Safety DSC/ASR The DSC and ASR systems offer increased safety in normal driving, but they should not encourage the driver to take extra risks or drive at high speed. It is in conditions of reduced grip (rain, snow, black ice) that the risk of loss of grip increases. It is therefore important for your safety to keep the DSC and ASR systems activated in all conditions, and particularly in difficult conditions.
Safety Seat belts Front seat belts The pretensioning seat belts are active when the ignition is on. The force limiter reduces the pressure of the seat belt against the chest of the occupant, so increasing his protection. Fastening The front seat belts are fitted with a pretensioning system and force limiter. This system improves safety in the front seats in the event of a front impact.
Safety Seat belts and passenger's front airbag warning lamp display screen Rear seat belts Each rear seat is fitted with a three-point inertia reel seat belt with force limiter. Fastening F Pull the strap, then insert the tongue in the buckle. F Check that the seat belt is fastened correctly by pulling the strap. Unfastening F Press the red button on the buckle. 152 This display screen is located in the roof console.
Safety Recommendations for children Advice The driver must ensure that passengers use the seat belts correctly and that they are all fastened before setting off. Wherever you are seated in the vehicle, always fasten your seat belt, even for short journeys. Do not interchange the seat belt buckles as they will not fulfill their role fully. The seat belts are fitted with an inertia reel permitting automatic adjustment of the length of the strap to your size.
Safety Airbags System designed to contribute towards improving the safety of the occupants (with the exception of the rear centre passenger) in the event of a violent collision. The airbags supplement the action of the force-limiting seat belts.
Safety Front airbags System which contributes towards the protection of the head and chest of the driver and front passenger in the event of a front impact. The driver's airbag is fitted in the centre of the steering wheel; the front passenger's airbag is fitted in the dashboard above the glove box.
Safety Lateral airbags* Operating fault If this symbol appears in the instrument panel screen, accompanied by an audible warning and a message, contact a CITROËN dealer or a qualified workshop without delay to have the system checked. The airbags may no longer be deployed in the event of a serious impact. If this warning lamp flashes, contact a CITROËN dealer or a qualified workshop without delay.
Safety Curtain airbags* System which contributes towards the protection of the driver and passengers (with the exception of the rear centre passenger) in the event of a serious side impact, in order to limit the risk of injury to the side of the head. Each curtain airbag is fitted in the pillars and the upper part of the passenger compartment. Knee airbag In the event of a minor impact or bump on the side of the vehicle or if the vehicle rolls over, the airbags may not be deployed.
Safety Advice For the airbags to be fully effective, observe the safety recommendations below: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...), nor fix or attach anything close to the inflation trajectory of the airbags; this could cause injuries during their deployment. Never modify the original definition of your vehicle, particularly in the area directly around the airbags.
Safety General points relating to child seats Although one of CITROËN's main criteria when designing your vehicle, the safety of your children also depends on you.
Safety Child seat at the rear Rearward facing Forward facing Centre rear seat A child seat with a support leg must never be installed on the centre rear passenger seat. The incorrect installation of a child seat in a vehicle compromises the protection of the child in the event of an accident.
Safety Child seat in the front* Rearward facing Forward facing When a rearward facing child seat is installed on the front passenger seat, adjust the seat to the intermediate longitudinal and highest position, with the backrest straightened. The passenger's front airbag must be deactivated. Otherwise, the child risks being seriously injured or killed if the airbag were to inflate.
Safety Deactivating the passenger's front airbag Never install a rearward facing child restraint system on a seat protected by an active front airbag. This could cause the death of the child or serious injury. The warning label present on both sides of the passenger's sun visor repeats this advice. In line with current legislation, the following tables contain this warning in all of the languages required. Passenger airbag OFF This label is located on the middle door pillar, passenger side.
Safety AR BG НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето. CS NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ. DA Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT KVÆSTET eller DRÆBT.
Safety MT Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla NL Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD.
Safety Child seats recommended by CITROËN CITROËN offers a range of recommended child seats which are secured using a three point seat belt. Group 0+: from birth to 13 kg L1 "RÖMER Baby-Safe Plus" Installed in the rearward facing position. Groups 2 and 3: from 15 to 36 kg L5 "RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings. The child is restrained by the seat belt.
Safety Installing child seats secured using the seat belt In conformity with European law, this table shows you the possibilities for the installation of universally approved child seats (a) using a seat belt, depending on the weight of the child and the seating position in the vehicle. Weight and indicative age of child Up to 13 kg (Groups 0 (b) and 0+) Up to approx. 1 year From 9 to 18 kg (Group 1) From approx. 1 to 3 years From 15 to 25 kg (Group 2) From approx.
Safety (a) Universal child seat: child seat which can be installed in all vehicles using the seat belt. (b) Group 0: from birth to 10 kg. Shells and "car cots" cannot be installed on the front passenger seat. (c) Consult the current legislation for your country before driving with your child in this seat. (d) To install a child seat on a rear seat, rearward facing or forward facing, move the front seat forward, then straighten the backrest to allow enough space for the child seat and the child's legs.
Safety Advice The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident. Ensure that there is no seat belt or seat belt buckle under the child seat, as this could destabilise it. Remember to fasten the seat belts or the child seat harnesses keeping the slack relative to the child's body to a minimum, even for short journeys.
Safety "ISOFIX" mountings Your vehicle has been approved in accordance with the latest ISOFIX regulations. The outer rear seats are fitted with regulation ISOFIX mountings. Saloon Tourer There are three rings for each outer rear seat: - two lower rings A, located between the vehicle seat back and cushion, indicated by a marking, - an upper ring B, called the TOP TETHER, fixed to the rear shelf and located under a cover behind the head restraint behind the head restraint, for fixing the upper strap.
Safety The TOP TETHER is used to secure the upper strap of child seats that have one. This arrangement limits the forward tipping of the child seat in the event of a front impact. This ISOFIX mounting system provides fast, reliable and safe fitting of the child seat in your vehicle. The ISOFIX child seats are fitted with two latches which are secured easily on the two rings A, following installation of the guides (supplied with the seat). Some also have an upper strap which is attached to the ring B or C.
Safety ISOFIX child seat recommended by CITROËN and type approved for your vehicle RÖMER BabySafe Plus ISOFIX (size category E) Group 0+: up to 13 kg Installed in the rearward facing position using an ISOFIX base which is attached to the rings A. The base has a support leg, adjustable for height, that must be in contact with the floor of the vehicle. This child seat can also be secured using a seat belt.
Safety Positions for fitting ISOFIX child seats In conformity with European law, this table shows you the possibilities for the installation of ISOFIX child seats to seats in the vehicle fitted with ISOFIX mounting points. For ISOFIX universal and semi-universal child seats, the ISOFIX size class, defined by a letter from A to G, is shown on the child seat to the right of the ISOFIX logo. Weight of child/Age given as a guide Up to 10 kg (group 0) Up to approx.
Safety Electric child lock Remote control system to prevent opening of the rear doors using their interior controls and use of the rear electric windows. The control is located on the driver's door, with the electric window controls. Any other status of the indicator lamp indicates a fault with the electric child lock. Have it checked by a CITROËN dealer or a qualified workshop. Activation F Press button A. The indicator lamp in button A comes on, accompanied by a message in the instrument panel screen.
Practical information TOTAL & CITROËN Partners in performance and protecting the environment Innovation in the search for performance For over 40 years, the TOTAL Research and Development departments have developed lubricants for CITROËN, to match the latest technical innovations on CITROËN vehicles, both for competition and for everyday motoring. For you, this is an assurance that you will obtain the best performance from your engine.
Practical information Fuel tank Capacity of the tank: approximately 71 litres*. Low fuel level Refuelling When the low fuel level in the tank is reached, this warning lamp comes on in the instrument panel, accompanied by an audible warning and a message in the display screen. When it first comes on, there remains around 5 litres of fuel in the tank. You must refuel to avoid running out of fuel.
Practical information Travelling abroad Certain fuels could damage the engine of your vehicle. In certain countries, the use of a particular fuel may be required (specific octane rating, specific sales name…) to ensure correct operation of the engine. For any additional information, contact your dealer.
Practical information Misfuel prevention (Diesel)* Mechanical device which prevents filling the tank of a Diesel vehicle with petrol. It avoids the risk of engine damage that can result from filling with the wrong fuel. Located in the filler neck, the misfuel prevention device appears when the filler cap is removed. Operation It remains possible to use a fuel can to fill the tank.
Practical information Snow chains In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking. The snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels.
Practical information Energy economy mode System which manages the duration of use of certain functions to conserve a sufficient level of charge in the battery. After the engine has stopped, you can still use functions such as the audio and telematics system, windscreen wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum combined duration of about forty minutes.
Practical information Towing a trailer Your vehicle is primarily designed for transporting people and luggage, but it may also be used for towing a trailer. Driving with a trailer places greater demands on the towing vehicle and the driver must take particular care. For more information on Driving advice, particularly when towing, refer to the corresponding section.
Practical information Blanking cover Cooling Braking Towing a trailer on a slope increases the temperature of the coolant. As the fan is electrically controlled, its cooling capacity is not dependent on the engine speed. F To lower the engine speed, reduce your speed. The maximum towed load on a long incline depends on the gradient and the exterior temperature. In all cases, keep a check on the coolant temperature. Towing a trailer increases the braking distance.
Practical information Roof bars The design of your vehicle requires the use of roof bars that are tested and approved by CITROËN, for your safety and to avoid damage to the roof and tailgate. Regardless of the type of loading equipment to be transported on the roof (bicycle carrier, ski carrier...), it is imperative that you add transverse roof bars. Any securing or lashing to components other than the roof bars is strictly prohibited.
Practical information Very cold climate protection* Adjustable device which prevents the intake of snow particles, which could obstruct the air filter. HDi 160 Diesel engine It is essential to remove the very cold protection when: - the exterior temperature exceeds 10 °C. - driving at speeds of over 75 mph (approximately 120 km/h). Normal position Snow position The flap 2 is in a horizontal position in the air duct 3.
Practical information Cold climate screen* Removable screen which prevents the accumulation of snow at the radiator cooling fan. Fitting F Offer up the 2 sections of the snow guard to the upper and lower sections of the front bumper. F Press on the surround to clip in one by one the fixing clips. Remove Before fitting F Using a screwdriver, lever each fixing clip in turn to disengage them. After fitting * Depending on the country of sale.
Practical information Bonnet Opening Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from an automatic change to START mode. The location of the interior release lever prevents opening of the bonnet while the front left-hand door is closed. This operation must only be carried out when the vehicle is stationary. Avoid opening the bonnet in strong winds.
Practical information Petrol engines The various caps and covers allow access for checking fluid levels and for replacing certain components. 1. Screenwash and headlamp wash fluid reservoir. 2. Power steering fluid reservoir or or power steering and Hydractive III + suspension fluid reservoir. 3. Engine coolant header tank. 4. Engine oil dipstick. 5. Engine oil filler cap. 6. Brake fluid reservoir. 7. Battery. 8. Air filter.
Practical information Diesel engines The various caps and covers allow access for checking fluid levels, for replacing certain components and for priming the fuel system. 1. Screenwash and headlamp wash fluid reservoir. 2. Power steering fluid reservoir or power steering and Hydractive III + suspension fluid reservoir. 3. Engine coolant header tank. 4. Engine oil dipstick. 5. Engine oil filler cap. 6. Air filter. 7. Brake fluid reservoir. 8. Battery.
Practical information Checking levels Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop. Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any time (even with the ignition off).
Practical information Oil grade Topping-up the engine oil level Engine oil change Before topping-up the oil or changing the oil, check that the oil is the correct grade for your engine and conforms to the manufacturer's recommendations. The location of the oil filler cap is shown in the corresponding underbonnet layout view. F Unscrew the oil filler cap to reveal the filler aperture. F Add oil in small quantities, avoiding any spills on engine components (risk of fire).
Practical information Brake fluid level The brake fluid level should be close to the "MAX" mark. If it is not, check the brake pad wear. Changing the fluid Refer to the manufacturer's service schedule for details of the interval for this operation. Fluid specification The brake fluid must conform to the manufacturer's recommendations. Power steering or power steering and suspension fluid level For topping up, it is necessary to go to a CITROËN dealer or a qualified workshop.
Practical information Screenwash and headlamp wash fluid I n the case of vehicles fitted with headlamp washers, the low fluid level is indicated by an audible signal and a message in the screen. Top up the reservoir when you next stop the vehicle. Diesel additive level (Diesel engine with particle filter) A low additive level is indicated by illumination of this warning lamp, accompanied by an audible warning and a message in the instrument panel screen.
Practical information Checks Unless otherwise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine. Otherwise, have them checked by a CITROËN dealer or a qualified workshop. 12 V battery The battery does not require any maintenance. However, check regularly that the terminals are correctly tightened (versions without quick release terminals) and that the connections are clean.
Practical information Particle filter system (Diesel) Complementary to the catalytic converter, this filter makes an active contribution to the preservation of air quality by trapping unburnt pollutant particles. Black exhaust fumes are thus no longer emitted. After prolonged idling or driving at very low speeds, you may occasionally notice water vapour being emitted from the exhaust when accelerating. This is of no consequence to the running of the vehicle or to the environment.
Practical information Brake pads Brake wear depends on the style of driving, particularly in the case of vehicles used in town, over short distances. It may be necessary to have the condition of the brakes checked, even between vehicle services. Unless there is a leak in the circuit, a drop in the brake fluid level indicates that the brake pads are worn. Brake disc wear For information on checking brake disc wear, contact a CITROËN dealer or a qualified workshop.
Practical information AdBlue® and SCR system for BlueHDi Diesel engines To assure respect for the environment and conformity with the new Euro 6 emissions standard, without adversely affecting the performance or fuel consumption of Diesel engines, CITROËN has taken the decision to equip its vehicles with an effective system that associates SCR (Selective Catalytic Reduction) with a particle filter (FAP) for the treatment of exhaust gases.
Practical information AdBlue® fluid range indicators Once the AdBlue ® tank is on reserve or after detection of a fault with the SCR emissions control system, when the ignition is switched on, an indicator displays an estimate of the distance that can be covered, the range, before engine starting is prevented. In the event of simultaneous system fault and low AdBlue ® level, the shortest range figure is the one displayed.
Practical information Remaining range between 350 and 1500 miles (600 and 2 400 km) Remaining range between 0 and 350 miles (0 and 600 km) Breakdown related to a lack of AdBlue ® When switching on the ignition, this warning lamp comes on, accompanied by an audible signal and the display of a message (e.g. "Top-up emissions additive: Starting prevented in 900 miles") indicating the remaining range expressed in miles or kilometres.
Practical information In the event of a fault with the SCR emissions control system A system that prevents engine starting is activated automatically from 650 miles (1 100 km) after confirmation of a fault with the SCR emissions control system. Have the system checked by a CITROËN dealer or a qualified workshop as soon as possible.
Practical information Starting prevented Every time the ignition is switched on, these warning lamps come on, accompanied by an audible signal and the display of the message "Emissions fault: Starting prevented". You have exceeded the authorised driving limit: the starting prevention system inhibits engine starting. To be able to start the engine, you must call on a CITROËN dealer or a qualified workshop. Freezing of the AdBlue ® AdBlue ® freezes at temperatures below around -11°C.
Practical information Topping-up the AdBlue® Filling the AdBlue ® tank is an operation included in every routine service on your vehicle by a CITROËN dealer or a qualified workshop. Nevertheless, given the capacity of the tank, it may be necessary to top-up the fluid between services, more particularly if an alert (warning lamps and a message) signals the requirement. You can go to a CITROËN dealer or a qualified workshop. If you envisage topping-up yourself, please read the following warnings carefully.
Practical information Recommendations on storage Procedure AdBlue ® freezes at about -11°C and deteriorates above 25°C. It is recommended that bottles be stored in a cool area and protected from direct sunlight. Under these conditions, the fluid can be kept for at least a year. If the additive has frozen, it can be used once it has completely thawed out. Before starting the top-up procedure, ensure that the vehicle is parked on a flat and level surface. F Switch off the ignition and remove the key.
Practical information If any fluid is split or splashed, wash immediately with cold water or wipe with a damp cloth. If the fluid has crystallised, clean it off using a sponge and hot water. Filling F Pour the contents of the bottle into your vehicle's AdBlue ® tank. Important: if your vehicle's AdBlue ® tank is completely empty which is confirmed by the alert messages and the impossibility of starting the engine, you must add at least 3.8 litres (so two 1.89 litre bottles).
In the event of a breakdown Running out of fuel (Diesel) Priming the fuel system HDi engines make use of advanced technology. For any work on your vehicle, contact a qualified workshop that has the skills and equipment required, which a CITROËN dealer is able to provide.
In the event of a breakdown Temporary puncture repair kit This kit consists of a compressor and a sealant cartridge. It allows the temporary repair of a tyre. You are then able to go to the nearest garage. Access to the kit This kit is installed in the storage box, under the boot floor. It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder. Its compressor can be used to check and adjust the pressure of the tyre.
In the event of a breakdown Description of the kit The tyre inflation pressures are given on this label. A. "Sealant" or "Air" position selector. B. On "I" / off "O" switch. C. Deflation button. D. Pressure gauge (in bars and psi). E. Compartment housing a cable with an adaptor for a 12 V socket. F. Sealant cartridge. G. White pipe with cap for repair and inflation. H. Speed limit sticker.
In the event of a breakdown Repair procedure 1. Sealing F Switch off the ignition. F Turn the selector A to the "sealant" position. F Check that the switch B is in position "O". Avoid removing any foreign bodies which have penetrated into the tyre. 206 F Uncoil the white pipe G fully. F Unscrew the cap from the white pipe. F Connect the white pipe to the valve of the tyre to be repaired. Take care, this product is harmful if swallowed and causes irritation to the eyes.
In the event of a breakdown F Switch on the compressor by moving the switch B to position "I" until the tyre pressure reaches 2.0 bars. The sealant is injected into the tyre under pressure; do not disconnect the pipe from the valve during this operation (risk of splashing). F Remove the kit and screw the cap back on the white pipe. Take care to avoid staining your vehicle with traces of fluid. Keep the kit to hand.
In the event of a breakdown 2. Inflation F Turn the selector A to the "Air" position. F Uncoil the white pipe G fully. F Connect the white pipe to the tyre valve. F Connect the compressor's electric plug to the vehicle's 12 V socket. F Start the vehicle again and leave the engine running. As soon as possible, go to a CITROËN dealer or a qualified workshop. You must inform the technician that you have used this kit.
In the event of a breakdown Removing the pipe and cartridge F Turn the pipe assembly 2 to the left until it contacts the unit. F Disconnect the union 1 from the cartridge by turning it a quarter turn anti-clockwise. F Extract the pipe assembly 2, then disconnect the union 3 from the air delivery pipe by turning it a quarter turn anticlockwise. F Remove the pipe assembly 2. F Support the compressor vertically. F Unscrew the cartridge 4 from the bottom.
In the event of a breakdown Checking / adjusting tyre pressures You can also use the compressor without injecting any product, to check and if necessary adjust your tyre pressures. F Turn the selector A to the "Air" position. F Uncoil the white pipe G fully. F Connect the pipe to the tyre valve. 210 F Connect the compressor's electrical connector to the vehicle's 12 V socket. F Start the vehicle and let the engine run.
In the event of a breakdown Changing a wheel Access to the tools For vehicles supplied with a standard spare wheel (same size as the four wheels), the tools are stowed in a carrier, located in the spare wheel. F Release the retaining strap for access to it. List of tools All of these tools are specific to your vehicle and may vary according to equipment. Do not use them for any other purpose.
In the event of a breakdown Access to the spare wheel Removing the standard spare wheel F Detach the strap, then push the wheel forwards so as to be able to lift it. Repositioning the standard spare wheel Removing the boot floor F Saloon: raise the boot floor and fold in two. F Tourer: raise the boot floor and hook it using the retractable handle. Secure the hook to the top part of the boot. 212 F Position the spare wheel flat in the boot, then pull it towards you.
In the event of a breakdown Repositioning the "space-saver" spare wheel F Return the spare wheel to its housing above the toolbox. F Unscrew the nut on the bolt by a few turns. F Place the fixing parts (nut and bolt) in the middle of the wheel. F Tighten the central nut until it clicks to secure the wheel. Repositioning the boot floor F Release the boot floor to return it to its initial position. The tyre pressures are indicated on the label located on the left-hand centre door pillar.
In the event of a breakdown Removing a wheel F Park the vehicle on stable, firm ground that is not slippery. Apply the parking brake. F If your vehicle is equipped with "Hydractive III+" suspension, with the engine running at idle, adjust the ground clearance to its maximum height. F Switch off the ignition and engage first gear (position P for an automatic gearbox).
In the event of a breakdown F Extend the jack 2 until its head comes into contact with the jacking point A or B used; the contact area A or B on the vehicle must be correctly inserted into the central part of the head of the jack. F Raise the vehicle until there is sufficient space between the wheel and the ground to easily fit the spare (non punctured) wheel.
In the event of a breakdown Wheel for temporary use Your vehicle may be fitted with a spare wheel which is different to those on the vehicle. When fitting the spare wheel, it is normal to notice that the wheel bolt washers do not come into contact with the wheel rim. The spare wheel is secured by the conical tapering of the wheel bolt’s shaft. When refitting the original wheel, ensure that the wheel bolt contact surfaces are clean and in good condition.
In the event of a breakdown F Tighten the security bolt using wheelbrace 1 fitted with the security bolt socket (depending on equipment). F Tighten the other bolts using just the wheelbrace 1. F Refit the protectors on the bolts (depending on equipment). F Stow the tools in the carrier box. F Return the suspension to the normal position. F Check that the tyre pressure is correct and have the balancing checked.
In the event of a breakdown Changing a bulb The headlamps have polycarbonate lenses with a protective coating: F do not clean them using a dry or abrasive cloth, nor with a detergent or solvent product, F use a sponge and soapy water or a pH neutral product, F when using a high pressure washer on persistent marks, do not keep the lance directed towards the lamps or their edges for too long, so as not to damage their protective coating and seals.
In the event of a breakdown Model with halogen headlamps Main beam headlamps Dipped beam headlamps 1. 2. 3. 4. F Remove the protective cap A. F Disengage the retaining spring. F Remove the bulb and replace it, paying attention to the direction of fitting. F Refit the retaining spring. F Refit the protective cap A. F Remove the protective cap B. F Disconnect the connector by pressing it between the thumb and index finger. F Free the bulb from its two metal clamps. F Take out the bulb.
In the event of a breakdown Directional lamp F Remove the protective cap C. F Disconnect the connector by pressing it between the thumb and index finger. F Free the bulb from its two metal clamps. F Take out the bulb. F Replace the bulb, exerting a slight axial force. F Refit the connector, until it is all the way in. F Refit the protective cap C. 220 Direction indicators Bulbs: HP24 F Remove the fixing screw of cover A using a torx tool, tip the cover over and remove.
In the event of a breakdown Side repeaters Front foglamps Bulbs: H8 F Remove the fixing screw of cover A using a torx tool, tip the cover over and remove. F Remove the fixing screw of lamp B using a torx tool, then pull on the lamp to remove it from the bumper. F Disconnect the connector D. F Remove the bulb by performing a quarter of a turn. F Replace the bulb. F Refit the connector D. F Refit the headlamp unit in the bumper. F Refit the lamp screws.
In the event of a breakdown Rear lamps (Saloon) Identify the failed bulb. 1. Brake lamps and sidelamps: P21W/5W 2. Sidelamps: R5W 3. Reversing lamps: H21W 4. Foglamps: H21W 5. Direction indicators: PY21W 222 Boot lid-mounted lamps F Open the boot. F Using a flat screwdriver, remove the 3 clips which fix the trim in the lamp area. F Partially remove the trim F. F Disconnect the connector G. F Unclip the bulb holder H. F Replace the failed bulb. F Refit the bulb holder H.
In the event of a breakdown F F F F F F F Detach the bulb holder D. Replace the failed bulb. Refit the bulb holder D. Place the lamp in its housing. Screw in the 2 fixings C. Refit connector B. Refit the side boot trim A. You can use the wheelbrace to screw or unscrew the fixings C. 8 Wing-mounted lamps For vehicles fitted with a Hi-Fi amplifier, on the right-hand side slacken the screw by a quarter turn, then pull the boot side trim A up. F Remove the lateral boot trim flap A.
In the event of a breakdown Rear lamps (Tourer) Identify the failed bulb. 1. Brake lamps and sidelamps: P21W/5W 2. Sidelamps: R5W 3. Reversing lamps: H21W 4. Foglamps: H21W 5. Direction indicators: PY21W 224 Tailgate-mounted lamps F Open the boot. F Using a flat screwdriver, remove the plastic cover E. F Disconnect the connector F. F Unscrew the fixing nut G. F Disengage the lamp from its housing. F Unclip the bulb holder H. F Replace the failed bulb.
In the event of a breakdown F F F F F F F Detach the bulb holder D. Replace the faulty bulb. Refit the bulb holder D. Place the lamp in its housing. Screw in the fixing nut C. Refit the connector B. Refit the side boot trim A. You can use the wheelbrace to screw or unscrew the fixing nut C. 8 Wing-mounted lamps For vehicles fitted with a Hi-Fi amplifier, on the right-hand side slacken the screw by a quarter turn, then pull the boot side trim A up. F Pull away the flap in the boot side trim A.
In the event of a breakdown F Remove the lens. F Change the faulty bulb. Number plate lamps (W5W) F Insert a thin screwdriver into one of the external holes of the lens. F Push it outwards to unclip it. 226 Third brake lamp (LEDs) For the replacement of this type of light emitting diode lamp, contact a CITROËN dealer or a qualified workshop.
In the event of a breakdown Interior lamps Courtesy lamps Rear reading lamps (Tourer) Boot lamp Bulb: W5W F Unclip the transparent cover of the roof lamp to reach the bulb. Bulb: W5W F Detach the cover of the reading lamp to access the bulb. Bulb: W5W F Detach the lamp cover for access to the bulb. Map reading lamps Bulb: W5W F Detach the cover. F If necessary, detach the partition of the affected map reading lamp.
In the event of a breakdown 228 Door aperture lamps Footwell lighting Glove box Bulb: W5W F Detach the lamp cover for access to the bulb. Bulb: W5W F Detach the lamp cover for access to the bulb. Bulb: W5W F Detach the lamp cover for access to the bulb.
In the event of a breakdown Changing a fuse The 2 fuseboxes are located below the dashboard and under the bonnet. Replacing a fuse Before replacing a fuse, you must: - ascertain the cause of the fault and have it remedied, - switch off all electrical consumers, - park the vehicle and switch off the ignition, - identify the failed fuse using the allocation tables and diagrams presented on the following pages.
In the event of a breakdown Fuses under the dashboard Access to the fuses F Fully open the storage box then pull firmly on it horizontally, F Remove the trim by pulling sharply on the bottom. Fusebox A When refitting the storage box, observe the following advice: - with the storage box horizontal, refit the bottom ensuring that the lower cut-outs are in line with the pins, - give a sharp push to the front, - close the storage box, ensuring that the springs located behind pass over the top.
In the event of a breakdown Fusebox A Fuse N° Rating G29 - Function G30 5A Heated door mirrors G31 5A Rain and sunshine sensor Not used G32 5A Seat belt not fastened warning lamps G33 5A Electrochrome mirrors G34 20 A Sunroof (Saloon) G35 5A Passenger door lighting - Passenger door mirror adjustment G36 30 A Electric tailgate (Tourer) G37 20 A Heated front seats G38 30 A Driver’s electric seat G39 30 A Passenger’s electric seat - Hi-Fi amplifier G40 3A Trailer relay un
In the event of a breakdown Fusebox C 232 Fuse N° Rating F1 15 A Rear screen wipe (Tourer) Function F2 30 A Locking and deadlocking relay F3 5A Airbags F4 10 A Automatic gearbox - Additional heater unit (Diesel) - Electrochrome rear view mirrors F5 30 A Front windows - Sun roof - Passenger door lighting - Passenger door mirror adjustment F6 30 A Rear windows F7 5A Vanity mirror lighting - Glove box lighting - Interior lamps - Torch (Tourer) F8 20 A Audio system - Steering mounte
In the event of a breakdown Fuses under the bonnet Access to the fuses F Undo each screw by a quarter turn. F Remove the cover. F Change the fuse. After a repair, take care to close the cover correctly to ensure that it is sealed correctly. Any repairs on the maxi-fuses (that give additional protection) located in the fuseboxes, must be left to a CITROËN or a qualified workshop.
In the event of a breakdown Table of fuses 234 Fuse N° Rating Function F6 25 A Rear 12 V socket (max power: 100 W) F7 15 A Foglamps F8 20 A Additional burner (Diesel) F9 30 A Electric parking brake
In the event of a breakdown 12 V battery Procedure for starting the engine using another battery or charging a discharged battery. General points Access to the battery Lead-acid starter batteries Batteries contain harmful substances such as sulphuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. Take used remote control batteries and vehicle batteries to a special collection point.
In the event of a breakdown Starting using another battery When your vehicle's battery is discharged, the engine can be started using a slave battery (external or on another vehicle) and jump lead cables or a battery booster. Never try to start the engine by connecting a battery charger. Never use a 24 V or higher battery booster. First check that the slave battery has a nominal voltage of 12 V and a capacity at least equal to that of the discharged battery.
In the event of a breakdown Charging the battery using a battery charger For optimum service life of the battery, it is essential to maintain an adequate state of charge. In some circumstances it may be necessary to charge the battery: - if you use your vehicle essentially for short journeys, - if the vehicle is to be taken off the road for several weeks. Contact a CITROËN dealer or a qualified workshop.
In the event of a breakdown Disconnecting the battery In order to maintain an adequate state of charge for starting the engine, it is recommended that the battery be disconnected if the vehicle is taken out of service for a long period. Before disconnecting the battery: F close all openings (doors, boot, windows), F switch off all electrical consumers (audio system, wipers, lighting, ...), F switch off the ignition and wait for four minutes.
In the event of a breakdown Towing the vehicle Procedure for having your vehicle towed or for towing another vehicle using a removable towing eye. Access to the tools The towing eye is installed in the jack box placed in the spare wheel. For access to it: F open the boot, F raise the floor, F remove the towing eye from the jack box. General recommendations Observe the legislation in force in your country. Ensure that the weight of the towing vehicle is higher than that of the towed vehicle.
In the event of a breakdown Towing your vehicle Towing another vehicle F Place the gear lever in neutral (position N with an automatic gearbox). Failure to observe this advice could result in damage to certain braking components and the absence of braking assistance the next time the engine is started. F On the front bumper, unclip the cover by levering at the bottom with the flat end of the towing eye. F Screw the towing eye in fully. F Attach a towing arm.
Technical data Engines and gearboxes Petrol engine Gearbox Model code: RD... RW... THP 160 THP 150 Automatic (6-speed) 5FM-A 5FE-A/D** Cubic capacity (cc) 1 598 Bore x stroke (mm) 77 x 85.8 EU standard maximum power (kW)* / hp DIN 120 / 110** Maximum power engine speed (rpm) 6 000 EU standard maximum torque (Nm) 240 Maximum torque engine speed (rpm) Fuel 1 400 Unleaded Catalytic converter Yes Engine oil capacity (in litres) (with filter replacement) 4.25 RD...: Saloon. RW...: Tourer.
Technical data Weights and towed loads (in kg) THP 160 THP 150 Petrol engine Gearbox Automatic (6-speed) RD 5FM-A RD 5FE-A/D RW 5FM-A RW 5FE-A/D Saloon Tourer Unladen weight 1 515 1 534 Kerb weight 1 590 1 609 Gross vehicle weight (GVW) 2 026 2 200 Gross train weight (GTW) 2 526 2 700 Braked trailer (within GTW limit) - on a 10% or 12% slope 500 500 Braked trailer* (with load transfer within GTW limit) 710 790 Unbraked trailer 500 500 Recommended nose weight 69 74 Model code
Technical data Engines and gearboxes Diesel engine BlueHDi 150 S&S BlueHDi 180 S&S Gearbox Manual (6-speed) EAT6 automatic (6-speed) AHR-M/S AHW-T/S Cubic capacity (cc) 1 997 1 997 Bore x stroke (mm) 85 x 88 85 x 88 EU standard maximum power (kW)* 110 133 Maximum power engine speed (rpm) 4 000 3 750 EU standard maximum torque (Nm) 370 400 Maximum torque engine speed (rpm) 2 000 2 000 Fuel Diesel Diesel Catalytic converter Yes Yes Particle filter (FAP) Yes Yes Engine oil c
Technical data Weights and towed loads (in kg) Diesel engine BlueHDi 150 S&S BlueHDi 180 S&S Gearbox Manual (6-speed) EAT6 automatic (6-speed) Model code RD AHR-M/S RW AHR-M/S RD AHW-T/S RW AHW-T/S Saloon Tourer Saloon Tourer Unladen weight 1 540 1 575 1 620 1 655 Kerb weight 1 615 1 650 1 695 1 730 Gross vehicle weight (GVW) 2 160 2 235 2 190 2 290 Body Gross train weight (GTW) 3 660 3 635 3 290 3 290 Braked trailer (within GTW limit) - on a 10% or 12% slope 1 500 1
Technical data Dimensions (in mm) Exterior (Saloon) A 2 815 B 1 054 C 910 D 4 779 E 1 586 F 2 096 G 1 557 H 1 860 I* 1 451 1 458** * Without roof bars. ** With metal spring suspension.
Technical data Interior (Saloon) 246 A 1 030 B 1 115 C 566 D 504 E 1 040 F 1 705
Technical data Exterior (Tourer) A 2 815 B 1 054 1 065*** C 959 D 4 829 4 840*** E 1 586 F 2 096 G 1 557 H 1 860 I* 1 479 1 483** * Without roof bars. ** With metal spring suspension. *** Tourer XTR version.
Technical data Interior (Tourer) 248 A 1 060 B 1 115 C 510 D 851 E 1 058 F 1 723
Technical data Identification markings Various visible markings for identification of the vehicle. Refer also to the registration document for your vehicle for the vehicle type, serial number, weights... All genuine CITROËN replacement parts are available exclusively within the dealer network. For your safety and in order to remain within the terms of the warranty, you are advised to use only CITROËN replacement parts. D.
Audio and Telematics Emergency or assistance call Localised Emergency Call In an emergency, press this button for more than 2 seconds. Flashing of the green indicator lamp and a voice message confirm that the call has been made to the "Localised Emergency Call"* centre. Pressing this button again immediately cancels the call. The green indicator lamp goes off. The green indicator lamp remains on (without flashing) when communication is established. It goes off at the end of the call.
Audio and Telematics Localised Assistance Call Operation of the system When the ignition is switched on, the green indicator lamp comes on for 3 seconds indicating that the system is operating correctly. If the orange indicator lamp flashes then goes off: the system has a fault. If the orange indicator lamp is on fixed: the back-up battery should be replaced. In both cases, the emergency and assistance calls service may not work. Contact a qualified repairer as soon as possible.
Audio and Telematics 7-inch touch screen tablet GPS satellite navigation - Multimedia audio - Bluetooth® telephone Contents First steps 254 Steering mounted controls 256 Menus 257 Navigation 258 Navigation - Guidance 266 270 Traffic Radio Media 272 Radio 278 DAB (Digital Audio Broadcasting) radio 280 Media 282 Settings 284 Connected services 292 292 MirrorLinkTM CarPlay ® 296 Telephone 298 Frequently asked questions 306 The system is protected in such a way that it will only operate in your
Audio and Telematics First steps Use the buttons arranged below the touch screen tablet for access to the menu carousel, then press the virtual buttons in the touch screen tablet. Each menu is displayed in one or two pages (primary page and secondary page). In very hot conditions, the system may go into stand-by (screen and sound completely off) for a minimum period of 5 minutes.
Audio and Telematics Short-cuts: using the touch buttons in the upper band of the touch screen tablet, it is possible to go directly to the selection of the audio source or the list of stations (or titles, depending on the source). In very high temperatures, the volume may be limited to protect the system. The return to normal takes place when the temperature in the passenger compartment drops. Press Menu to display the menu carousel.
Audio and Telematics Steering mounted controls Activate/deactivate "Black Panel" mode - black screen (night driving). Telephone: make a call. Call in progress: access to the telephone menu (end call, secret mode, hands-free mode). Telephone, press and hold: reject an incoming call, end a call; when there is no call in progress, access to the telephone menu. Radio, rotate: select the previous / next preset station. Media, rotate: select the previous / next track. Press: return to navigation.
Audio and Telematics Menus Navigation Radio Media Settings (Depending on equipment) Enter navigation settings and choose a destination. Connected services Select an audio source, a radio station, display photographs. Telephone Adjust the settings for sound (balance, ambience, ...) and the display (language, units, date, time, ...). Driving (Depending on equipment) Operate certain applications on your smartphone via MirrorLinkTM or CarPlay ®. Connect a telephone by Bluetooth ®.
Audio and Telematics Navigation Level 1 Level 2 Navigation 258 Level 3 Route settings
Audio and Telematics Level 1 Level 2 Level 3 Enter destination Comments Display recent destinations Fastest Shortest Time/distance Ecological Tolls Route settings Choose the navigation criteria. The map displays the route chosen according to these criteria. Ferries Navigation Traffic Strict-Close Settings Navigation Show route on map Display the map and start navigation. Confirm Save the options. Save current location Save the current address.
Audio and Telematics Level 1 Level 2 Enter destination Navigation Level 3 Address For managing contacts and their addresses, refer to the "Telephone" section. Contacts To use the telephone functions, refer to the "Telephone" section.
Audio and Telematics Level 1 Level 2 Level 3 Comments Current loc. Point of interest Address settings Town center Address Save Save the current address. Add waypoint Add a waypoint to the route. Navigate to Press to calculate the route. Addresses Navigation View Secondary page Contacts Enter destination Navigate to Select a contact then calculate the route. Search for contact Call On the map Display the map and zoom to view the roads.
Audio and Telematics Level 1 Navigation Level 2 Search for a point of interest Point of interest displayed on the map 262 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All POIs Navigation Secondary page Search for POI Motor Dining/hotels Personal Search Navigation List of categories available. After choosing the category, select the points of interest. Save the settings. Select all Delete Choose the display settings for POIs. Secondary page Import POIs Show POIs Confirm Save the options. .
Audio and Telematics Level 1 Level 2 Level 3 Diversion Traffic messages Map settings Map settings Navigation Settings Settings Settings 264 Moving between the two menus.
Audio and Telematics Level 1 Level 2 Level 3 Comments On the route Navigation Around vehicle Settings for the choice of messages and the filter radius. Near destination Secondary page Detour over a distance Traffic messages Detour Recalculate route Save your selections. Finish Flat view north heading Orientation Flat view vehicle heading Perspective view Navigation Choose the display and orientation of the map.
Audio and Telematics Navigation - Guidance Choosing a new destination Towards a new destination Press on Navigation to display the primary page. Select "Save" to save the address entered as a contact entry. The system allows up to 200 entries. Press on the secondary page. To delete navigation information, press on "Settings". Press on "Stop navigation". Select "Navigate to". Select "Enter destination". To resume navigation press on "Settings".
Audio and Telematics Towards a recent destination Press on Navigation to display the primary page. Press on the secondary page. Towards a contact To be able to use navigation "towards a contact in the directory", it is first necessary to enter the address for your contact. Select a destination from the contacts in the list offered. Select "Navigate to". Select "Enter destination". Press on Navigation to display the primary page. Press on the secondary page. Select an address from the list offered.
Audio and Telematics Towards GPS coordinates Towards a point on the map Towards points of interest (POI) Points of Interest (POI) are listed in different categories. Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Press on Navigation to display the primary page. Select "Enter destination". Select "Enter destination". Press on the secondary page. Select "Address". Select "On the map".
Audio and Telematics An annual mapping update allows new points of interest to be presented to you. You can also update the Risk areas / Danger areas every month. The detailed procedure is available on: http://citroen.navigation.com. .
Audio and Telematics Traffic Traffic information Risk areas / Danger zone alert settings Press on Navigation to display the primary page. Press on the secondary page. Display of messages This series of alerts and displays is only available if Risk areas have first been downloaded and installed on the system. Press on Navigation to display the primary page. Press on the secondary page. Select "Traffic messages". Select "Settings". Select "Alarm!" (Alert).
Audio and Telematics Setting filters Select the message from the list offered. Receiving TA messages Press on Navigation to display the primary page. Press on Navigation to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Select "Settings". Select "Traffic options". Select "Voice". Select the magnifying glass to have voice information.
Audio and Telematics Radio Media Level 1 Level 2 List of FM stations Save 272
Audio and Telematics Level 1 Level 2 Comments Radio Media List of FM stations Press on a radio station to select it. List FM Radio DAB Radio AM Radio USB Radio Media MirrorLink Select change of source. Source CarPlay iPod Bluetooth AUX Radio Media Press an empty location to Save it. Save (preset) .
Audio and Telematics Level 1 Level 2 List of FM stations Media 274 Photos Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Save Press a radio station to select it. Update list Update the list of stations received. Frequency Enter the desired radio frequency. Confirm Save the settings. Home screen Display the selected photo in the home page. Rotate Rotate the photo 90°. Select all Select all the photos in the list. Press again to deselect. Radio Media Secondary page Radio list Radio Media Secondary page Photos Previous photo. Slideshow Pause / Play.
Audio and Telematics Level 1 Level 2 Level 3 Media Settings Settings Settings 276
Audio and Telematics Level 1 Level 2 Level 3 Comments Radio Media Presentation of the last media used. Secondary page Media list Shuffle (all tracks) Media Shuffle (current album) Choose the play settings. Settings Repeat Aux. amplification RDS options Radio Media Secondary page Radio Settings DAB/FM station tracking Display Radio Text Activate or deactivate the settings.
Audio and Telematics Radio Selecting a station Changing a radio frequency Select "Save". Press on Radio Media to display the primary page. Select "List" in the primary page. Press on Radio Media to display the primary page. Select a preset radio station in the list. If necessary, select change of source. Or Press on Radio Media to display the primary page. Select "FM Radio". Press on the secondary page.
Audio and Telematics Presetting a station Select a radio station or frequency (refer to the corresponding section). OR Press on Radio Media to display the primary page. Press on "Save" (preset). Activating / Deactivating RDS Press on Radio Media to display the primary page. Press on the secondary page. Press on the secondary page. Select "Settings". Press on Frequency. THEN Select a number in the list to preset the previously chosen radio station. A long press on a number saves (presets) the station.
Audio and Telematics DAB (Digital Audio Broadcasting) radio Display of the name of the current station. Short-cut: access to the choice of audio source and the list of stations (or titles, depending on the source). Select the radio station. Any thumbnail broadcast by the station. Select the audio source. Display the "DAB" band. Secondary page. Display of "Radiotext" for the current station. Next "Multiplex". Next radio station. Previous "Multiplex". Previous radio station.
Audio and Telematics Digital radio Digital radio provides higher quality reception and also the graphical display of current information on the radio station being listened to. Select "List" in the primary page. The range of multiplexes available is displayed in alphabetical order. DAB / FM auto tracking "DAB" does not cover 100% of the territory.
Audio and Telematics Media USB player Auxiliary socket (AUX) Selection of source Press on Radio Media to display the primary page. Select change of source. Insert the USB memory stick into the USB port or connect the USB device to the USB port using a suitable cable (not supplied). To protect the system, do not use a USB hub. The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.
Audio and Telematics It is advisable to restrict file names to 20 characters, without using special characters (e.g. " " ? ; ù) to avoid any playing and displaying problems. The system supports USB mass storage portable players, BlackBerry ® devices or Apple ® players via USB ports. The adaptor cable is not supplied. Control of the peripheral device is with the audio system controls.
Audio and Telematics Settings Level 1 Level 2 Audio settings Audio settings Audio settings 284
Audio and Telematics Level 1 Settings Audio settings Settings Turn off screen Level 2 Comments Ambience Choose the sound ambience. Balance Sound distribution using the Arkamys ® system. Sound effects Set the volume or activate the link to vehicle speed. Ringtones Set the telephone ringtone and volume. Voice Set the volume and voice for speaking street names. Confirm Save your settings. Function that turns off the display. Pressing the screen reactivates it. .
Audio and Telematics Level 1 Level 2 Factory settings Configuration Adjust date and time Display screen 286
Audio and Telematics Level 1 Settings Secondary page System Settings Level 2 Comments Delete data Select the desired data in the list then press Delete. Factory settings Return to factory settings. Confirm Save the settings. Confirm Set the date and time then confirm. Settings Secondary page Time/Date Settings Secondary page Screen settings Activate automatic text scrolling Activate animations Activate or deactivate the setting then confirm. Confirm .
Audio and Telematics Level 1 Configuration Level 2 Calculator Calendar 288
Audio and Telematics Level 1 Level 2 Comments Settings Secondary page Select the calculator. Calculator Settings Secondary page Select the calendar. Calendar .
Audio and Telematics Audio settings Press on Settings to display the primary page. Select "Audio settings". Select "Ambience" Or "Balance" Or The distribution (or spatialisation using the Arkamys ® system) of sound is an audio process that allows the audio quality to be adapted to the number of passengers in the vehicle. Available only with the 6-speaker configuration. The audio settings (Ambience, Bass:, Treble: and Loudness) are different and independent for each sound source.
Audio and Telematics Modifying system settings Press on Settings to display the primary page. Press on Settings to display the primary page. Press on "Settings" to display the primary page. Press on the secondary page. Press on the secondary page. Press on the secondary page Select "System Settings". Select "Screen settings". Select "Delete data" to delete the list of recent destinations, personal points of interest, contacts in the list.
Audio and Telematics Connected services MirrorLinkTM Optional depending on the smartphone and operating system.
Audio and Telematics MirrorLinkTM smartphone connection As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the MirrorLinkTM technology to be displayed in the vehicle's screen. The principles and standards are constantly evolving.
Audio and Telematics Level 1 294 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments Access or return to the applications already downloaded to your smartphone and adapted to MirrorLinkTM technology. Connected services MirrorLinkTM Access to a menu list depending on the application chosen. "Back": abandon the current operation, go up one level. "Home": access or return to the "Car mode" page. Access to the "Connected services" primary page. .
Audio and Telematics CarPlay® 296
Audio and Telematics CarPlay® smartphone connection Connect a USB cable. The smartphone charges when connected by a USB cable. As a safety measure and because it requires sustained attention by the driver, using a smartphone when driving is prohibited. All operations must be done with the vehicle stationary. The synchronisation of a smartphone allows applications on a smartphone that are adapted to the CarPlay ® technology to be displayed on the vehicle's screen.
Audio and Telematics Telephone Level 1 Level 2 Call log Contacts 298 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments All calls Incoming calls Outgoing calls Telephone After making choices, start the call. Contacts Call log View Magnifying glass Create Call Addresses Create Modify Delete View Telephone Delete all Contacts By name After making choices, start the call. Confirm Navigate to Search for contact Call .
Audio and Telematics Level 1 Level 2 Bluetooth (devices) Telephone connection Devices detected Telephone Options 300 Level 3
Audio and Telematics Level 1 Telephone connection Level 2 Level 3 Search Connect / Disconnect Start or stop the Bluetooth ® connection to the selected peripheral device. Update Import the contacts from the selected telephone to store them in the audio system. Delete Delete the selected telephone. Confirm Save the settings.
Audio and Telematics Pairing a Bluetooth® telephone For reasons of safety and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth ® mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Procedure (short) from the telephone Procedure from the system Activate the telephone's Bluetooth ® function and ensure that it is "visible to all" (telephone configuration).
Audio and Telematics Connecting a Bluetooth® peripheral device Automatic reconnection The services available depend on the network, the SIM card and the compatibility of the Bluetooth ® telephone used. Check the telephone manual and with your network provider for details of the services available to you. Depending on the type of telephone, the system will ask you to accept or not the transfer of your contacts. If not, select "Update".
Audio and Telematics Managing paired telephones This function allows the connection or disconnection of a peripheral device as well as the deletion of a pairing. Receiving a call An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on the steering mounted TEL button to accept an incoming call. Press on Telephone to display the primary page. Make a long press Press on the secondary page. on the steering mounted TEL button to reject the call.
Audio and Telematics Managing contacts / entries Select "Contacts". Press on Telephone to display the primary page. Select the desired contact from the list offered. Select "By name" to view the list of contacts. Select "Contacts". Select "Call". Select "View". Calling a recently used number Press on Telephone to display the primary page. Select "Create" to add a new contact, observing the "international format". Or "Modify" to edit the selected contact. Select "Call log".
Audio and Telematics Frequently asked questions The table below gives answers to the most frequently asked questions on your audio system. Navigation QUESTION ANSWER The navigation settings may conflict with the current location (exclusion of toll roads on a toll motorway). Check the settings in the "Navigation" menu. The POIs do not appear. The POIs have not been selected. Select the POIs in the list of POIs. The Hazard zone audible warning does not work. The audible warning is not active.
Audio and Telematics QUESTION Certain traffic jams along the route are not indicated in real time. The altitude is not displayed. ANSWER SOLUTION On starting, it is several minutes before the system begins to receive Wait until the traffic information is being received the traffic information. correctly (display of the traffic information icons on the map). The filters are too restrictive. Modify the "Geographic filter" settings. In certain countries, only major routes (motorways...
Audio and Telematics Radio QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...). I cannot find some radio stations in the list of stations received. The name of the radio station changes. 308 ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling.
Audio and Telematics Media QUESTION ANSWER SOLUTION Delete the files supplied with the memory stick and limit the number of sub-folders in the file structure on the memory stick. Playback of my USB memory stick starts only after a very long wait (around 2 to 3 minutes). Some files supplied with the memory stick may greatly slow down access to reading the memory stick (multiplication by 10 of the catalogue time).
Audio and Telematics Settings QUESTION In changing the setting of treble and bass the equalizer setting is deselected. ANSWER SOLUTION The selection of an equalizer setting imposes the balance settings. Modifying one without the other is not possible. Modify the balance or equalizer settings to obtain the desired musical ambience. The selection of a distribution setting imposes the balance settings. Modifying one without the other is not possible.
Audio and Telematics QUESTION ANSWER SOLUTION Check that the audio settings for (Volume, Bass, Treble, Equalizer, Loudness) are adapted to the sources listened to. It is advisable to set the audio functions (Bass, Treble, Fr-Re balance, Le-Ri balance) to the middle position, select the "Linear", musical ambience and set the loudness correction to the "Inactive" position in radio mode. There is a difference in sound quality between the different audio sources.
Audio and Telematics Telephone QUESTION I cannot connect my Bluetooth ® telephone. ANSWER The telephone's Bluetooth function may be switched off or the telephone may not be visible. ® SOLUTION - - The Bluetooth® telephone is not compatible with the system. You can check the compatibility of your telephone at www.citroen.co.uk (services). The volume depends both on the system and on the telephone.
Audio and Telematics .
Audio and Telematics Audio system Audio system / Bluetooth® First steps Steering mounted controls Menus Radio Media Telephone Screen menu map(s) Frequently asked questions Your Audio system is coded in such a way that it will only operate in your vehicle. Contents 316 317 318 318 320 324 326 329 As a safety measure, the driver must only carry out operations which require prolonged attention while the vehicle is stationary.
Audio and Telematics First steps Buttons 1 to 6 Select a pre-set radio station. Long press: pre-set a station. Automatic frequency search down/ up. Select previous/next CD, MP3 or USB track. On / Off, volume setting. Select source: Radio; USB; AUX; CD; Streaming. Audio settings: Front/rear fader, left/right balance, bass/treble, loudness, audio ambiences. Display the list of local stations. Long press: CD tracks or MP3 folders (CD / USB). 316 * Available according to version.
Audio and Telematics Steering mounted controls Activate/deactivate "Black Panel" black screen mode (night driving). Telephone: make a call. Call in progress: access to the telephone menu (display the calls log). Telephone, press and hold: reject an incoming call. Radio, rotate: select the previous / next preset station. Media, rotate: select the genre / artist / folder in the classification list. Press: Access to short-cut menus depending on the display in the screen, confirm a selection. Mute.
Audio and Telematics Menus Radio Screen C Selecting a station For an overview of the menus available, refer to the "Screen menu map" section. Press the SOURCE button several times in succession and select the radio. Press the BAND AST button to select a waveband. Audio functions Radio; CD; USB; AUX. Trip computer Enter distances; Alerts; State of functions. Bluetooth ®: Telephone - Audio Pairing; Hands-free kit; Streaming. Personalisation-configuration Vehicle parameters; Display; Languages.
Audio and Telematics RDS Receiving TA messages The external environment (hills, buildings, tunnels, basement car parks, ...) may block reception, including in RDS mode. This is a normal effect of the way in which radio waves are transmitted and does not indicate any failure of the audio system. Press the MENU button. Select "Audio functions". Press OK. Select the "FM waveband preferences" function. Select "Activate RDS". Press OK, RDS is displayed in the screen.
Audio and Telematics Media USB player Press REFRESH LIST briefly to display the previously selected classification. This unit consists of a USB port and an auxiliary Jack socket, depending on model. Navigate through the list using the left / right and up / down buttons. The system creates playlists (temporary memory), which can take from a few seconds to several minutes on the first connection. Reducing the number of non-music files and the number of folders reduces this waiting time.
Audio and Telematics Auxiliary socket (AUX) CD player Insert circular compact discs only. Some anti-pirating systems, on original discs or CDs copied using a personal recorder, may cause faults which are no reflection on the quality of the vehicle's player. Insert a CD in the player, play begins automatically. Connect the portable device (MP3 player, …) to the auxiliary Jack socket using an audio cable (not supplied).
Audio and Telematics Playing an MP3 CD compilation Insert an MP3 CD compilation in the player. The audio equipment searches for all of the music tracks, which may take anything between a few seconds and several tens of seconds, before play begins. Information and advice To play a disc which has already been inserted, press the SOURCE button several times in succession and select CD. Press one of the buttons to select a folder on the CD.
Audio and Telematics Use only USB memory sticks formatted FAT32 (File Allocation Table). To protect the system, do not use a USB hub. It is recommended that you use genuine Apple ® USB cables for correct operation. Bluetooth® audio streaming Connecting Apple® players Streaming allows music files on the telephone to be played via the audio system. Connect the Apple ® player to the USB port using a suitable cable (not supplied). Play starts automatically.
Audio and Telematics Telephone Pairing a Bluetooth® telephone Screen C (Available according to model and version) As a safety measure and because they require prolonged attention on the part of the driver, the operations for pairing of the Bluetooth ® mobile telephone with the Bluetooth ® hands-free system of your audio equipment must be carried out with the vehicle stationary and the ignition on.
Audio and Telematics Receiving a call Making a call An incoming call is announced by a ring and a superimposed display in the screen. From the "Bluetooth: Telephone - Audio" menu. Ending a call During a call, press this button for more than 2 seconds. Select "Manage the telephone call". Select the YES tab on the display using the buttons. Confirm by pressing OK. Select "Call". Confirm with OK to end the call. Or Select "Calls list". Or Select "Directory".
Audio and Telematics Screen menu map(s) Screen C Press the OK dial for access to short-cut menus depending on the display on the screen.
Audio and Telematics Screen C Pressing the MENU button displays: Personalisationconfiguration Display configuration 1 Audio functions 2 Audio functions 1 FM preferences 2 3 4 3 4 3 4 Alternative frequencies (RDS) Activate / deactivate Regional mode (REG) Play modes 2 3 3 4 3 4 Album repeat (RPT) 3 Activate / deactivate 3 Track random play (RDM) 2 Activate / deactivate 3 Activate / deactivate 3 Radio-text information (RDTXT) 3 Activate / deactivate 2 3 3 1 Brightness-video adjustm
Audio and Telematics Bluetooth: Telephone Audio Bluetooth configuration 1 2 2 2 3 3 3 Connect/Disconnect an equipment Telephone function Audio Streaming function Consult the paired equipment Delete a paired equipment Perform a Bluetooth search Call 1 2 3 328 Calls list Directory Manage the telephone call 1 2 2 Terminate the current call Activate secret mode
Audio and Telematics Frequently asked questions The table below gives answers to the most frequently asked questions on your audio system. QUESTION ANSWER SOLUTION With the engine off, the audio system switches off after a few minutes of use. When the engine is switched off, the audio system operating time depends on the state of charge of the battery. The switch-off is normal: the audio equipment switches to economy mode and switches off to prevent discharging of the vehicle's battery.
Audio and Telematics QUESTION SOLUTION An incorrect waveband is selected. Press the BAND AST button to return to the waveband (AM, FM1, FM2, FMAST) on which the stations are stored. The traffic announcement (TA) is displayed. I do not receive any traffic information. The radio station is not part of the regional traffic information network. Tune to a radio station which broadcasts traffic information.
Audio and Telematics Media QUESTION ANSWER SOLUTION The message "USB peripheral error" is displayed on the screen. The Bluetooth® connection is cut. The battery of the peripheral may not be sufficiently charged. Recharge the battery of the peripheral device. The USB memory stick is not recognised. The USB memory stick may be corrupt. Reformat the USB memory stick. The CD is ejected automatically or is not played by the player.
Audio and Telematics Telephone QUESTION I am unable to access my voicemail. 332 ANSWER Few telephones or service providers allow the use of this function.
Alphabetical index A Accessories................................................... 144 AdBlue ® additive.......................32, 195, 196, 200 Adjusting headlamps..................................... 137 Adjusting head restraints...........................60, 68 Adjusting seat............................................ 60, 61 Adjusting the air distribution............................ 72 Adjusting the air flow........................................ 72 Adjusting the date................................
Alphabetical index Control, emergency door................................. 56 Control, heated seats....................................... 62 Control, panoramic sunroof blind.................... 79 Control stalk, lighting..................................... 132 Control stalk, wipers............................... 140-142 Courtesy lamps................................................ 76 Cruise control................................................. 121 Cup holder..........................................
Alphabetical index H Hazard warning lamps................................... 145 Headlamp adjustment.................................... 137 Headlamps, automatic illumination....... 133, 136 Headlamps, dipped beam...................... 132, 218 Headlamps, directional...........................137, 139 Headlamps, main beam......................... 132, 218 Headlamps, Xenon........................................ 218 Headlamp wash............................................. 141 Head restraints, front......
Alphabetical index P Mirrors, door.................................................... 66 Misfuel prevention.......................................... 177 Mountings, Isofix............................................ 169 MP3 CD.......................................................... 322 N Navigation......................................258, 260, 264 Net, high load retaining.................................... 89 Number plate lamps....................................... 226 Pads, brake................
Alphabetical index Screen, instrument panel..............15, 17, 20, 116 Screen menu map................ 258, 260, 264, 272, 274, 276, 284, 286, 288, 298, 300, 326 Screen, monochrome C................... 37, 318, 326 Screenwash, front.......................................... 141 Screenwash, rear........................................... 141 SCR (Selective Catalytic Reduction)................................................... 195 Seat belts........................................
Alphabetical index V Ventilation............................................ 12, 70, 71 Very cold protection....................................... 183 Voice recognition...................................293, 297 W Warning and indicator lamps..........26, 28,34, 36 Warning lamp, airbag....................................... 35 Warning lamp, SCR emissions control system............................................................ 33 Warning lamp, Service.................................... 27 Weights.....
Automobiles CITROËN declares, by application of the provisions of the European regulation (Directive 2000/53) relating to End of Life Vehicles, that it achieves the objectives set by this regulation and that recycled materials are used in the manufacture of the products that it sells. 4Dconcept Diadeis Interak Reproduction or translation of all or part of this document is prohibited without written authorisation from Automobiles CITROËN.
*16.C5.0040* 16.C5.
