Operation Manual

3
37
COMFORT
Returning the back of the
bench seat to its initial
position:
- fold the seat back rearwards and
secure it on the mounting B .
Take care not to trap the seat belts,
in particular between the seat back
and the mounting B.
- check that the back of the bench
seat is secured correctly.
REAR HEAD RESTRAINTS *
The rear head restraints can be
removed and have two positions:
- high, position for use.
- low, storage position.
To raise the head restraint, pull it
upwards.
To lower it, press lug A then the head
restraint.
To remove it:
- tilt the seat back slightly,
- move the head restraint to the
high position,
- press lug A pulling the head
restraint upwards at the same
time.
To refi t it:
- tilt the seat back slightly,
- engage the rods of the head
restraint in the openings.
To reach the low position, press lug A .
Folding the back of the bench
seat:
The seat back is folded from the rear
of the vehicle, with the boot open:
- check that the seat belt is positioned
correctly on the side of the seat
back to avoid damaging it,
- place the head restraints in the
low position (see "rear head
restraints"),
- while folding the seat back, pull
the strap(s) A , located behind the
seat back.
* According to version.