Operation Manual

3
44
COMFORT
"ISOFIX" MOUNTINGS
Your vehicle has been approved in
accordance with the new ISOFIX
regulation .
The seats * , represented below, are fi t-
ted with regulation ISOFIX mountings:
These are three rings for each seat: This ISOFIX mounting system pro-
vides fast, reliable and safe fi tting of
the child seat in your vehicle.
The ISOFIX child seats are fi tted
with two latches which are secured
easily on these lower rings A .
Some also have an upper strap
which is attached to the upper ring B .
- two lower rings A , located
between the vehicle seat back
and cushion, indicated by a
label,
* According to version.
- an upper ring B for securing the
upper strap, referred to as the
TOP TETHER , indicated by a
marking on the rear seat back
panel.
To attach this strap, raise the
vehicle seat's head restraint
then pass the hook between
its rods. Then fi x the hook on
the upper ring B and tighten the up-
per strap.
The incorrect installation of a
child seat in a vehicle compro-
mises the child's protection in
the event of an accident.
For information regarding the ISOFIX
child seats which can be installed in
your vehicle, refer to the table of lo-
cations for ISOFIX child seats.