Handbook CITROËN C1
On-line handbook Select one of the following means of access to view your handbook on-line... Find your handbook on the CITROËN website, under "MyCITROËN". This personal and customisable space allows you to establish direct and special contact with the manufacturer.
This handbook has been designed to help to make the most of your C1 in all circumstances and in complete safety. Take the time to read through it so as to familiarise yourself with your vehicle. This handbook covers all of the variations in equipment available across the whole C1 range. Your vehicle will be fitted with only some of the equipment described in this document, depending on its trim level, version and the specification for the country in which it was sold.
Contents Overview Eco-driving . Driving Access Keys Keyless Entry and Starting system Doors Boot Front electric windows Rear quarter windows Electric fabric roof 31 34 38 39 41 41 42 .
Contents Practical information Lighting and visibility Exterior lighting control stalk Automatic illumination of headlamps Direction indicators Headlamp beam height adjustment Wiper control stalk 98 101 103 103 104 Fuel tank Snow chains Electrical energy economy mode Accessories Changing a wiper blade Fitting roof bars Bonnet Petrol engines Checking levels Checks Technical data 138 140 141 142 144 144 146 147 148 151 181 182 183 184 Audio and telematics Safety Horn Hazard warning lamps ESC system Ac
Overview Exterior Keys Remote control "Keyless Entry and Starting" system Remote control battery Starting Door mirrors 31 32-33 34-37 33, 37 71, 72-73 Electric fabric roof Roof bars Accessories 42-45 144 142-143 Boot Temporary puncture repair kit 50 Lighting control stalk 98-103 Adjusting the headlamps 103 Changing bulbs 163-165, 167 - front lamps - direction indicator repeaters Doors - opening / closing - central locking Electric windows Quarter lights (5-door) 4 Reversing camera Towing 38-40 4
Overview .
Overview Instruments and controls Heating, ventilation Manual air conditioning Automatic air conditioning Windscreen demist / defrost Rear screen demist / defrost Passenger's front airbag Side air vents 52-54 55-56 57-59 60 Courtesy lamp Control for electric fabric roof Rear view mirror Sun visors 62 42 51 64 61 119 Instrument panel Rev counter Central screen Indicator and warning lamps Indicators Trip computer 52 Glove box 64 Deactivating the passenger's front airbag 119 Reinitialising the under-i
Overview .
Overview Maintenance - Technical data Checking levels 148-150 - engine oil - brake fluid - coolant - screenwash fluid 151-152 Checking components - clutch - battery - air / passenger compartment filter - oil filter - brake pads / discs Changing bulbs - front - rear 8 12 V battery Economy mode Engine compartment fuses 177-179 141 168-169, 173-176 Petrol weights 182 163-167 Opening the bonnet Underbonnet, petrol Petrol engines 146 147 181 Dimensions Identification markings 183 184
Eco-driving . Eco-driving Eco-driving is a range of everyday practices that allow the motorist to optimise their fuel consumption and CO2 emissions. Optimise the use of your gearbox Control the use of your electrical equipment With a manual gearbox, move off gently and change up without waiting. During acceleration change up early. Before moving off, if the passenger compartment is too warm, ventilate it by opening the windows and air vents before using the air conditioning.
Eco-driving Limit the causes of excess consumption Observe the recommendations on maintenance Spread loads throughout the vehicle; place the heaviest items in the bottom of the boot, as close as possible to the rear seats. Limit the loads carried in the vehicle and reduce wind resistance (roof bars, roof rack...). Use a roof box in preference. Remove roof bars and roof racks after use. Check the tyre pressures regularly, when cold, referring to the label in the door aperture, driver's side.
Instruments Instrument panels Type 1 instrument panel 1. 2. 3. Speedometer (mph or km/h). Central display screen. For more information, refer to the corresponding section. Gear efficiency indicator. 4. 5. 1 Display management button (DISP). Display of information in ascending order. Display management button (DISP). Display of information in descending order.
Instruments Type 2 instrument panel 1. 2. 3. 4. 12 Speedometer (mph or km/h). Central display screen. For more information, refer to the corresponding section. Gear efficiency indicator. Display management button (DISP). Display of information in ascending order. 5. 6. Display management button (DISP). Display of information in descending order. Rev counter The engine speed is indicated by the display of orange illuminated bars.
Instruments Central display screen The information displayed varies according to your vehicle's engine and type of gearbox. Central display screen with the VTi 68 engine and manual gearbox 1. 2. 3. Ambient temperature. It flashes if there is a risk of ice. Vehicle information with: - Total and trip distance recorders. - Trip computer information. - Speed limiter information. Fuel gauge. Central display screen with the VTi 68 and ETG electronic gearbox 1. 2. 3.
Instruments Seat belts and passenger's front airbag warning lamps display screen A. Left hand rear seat belt unfastened warning. B. Right hand rear seat belt unfastened warning. C. Passenger's front airbag deactivated warning lamp. D. Passenger's front airbag activated warning lamp. Warning lamp C or D remains on, depending on the state of the passenger's front airbag (deactivated or activated).
Instruments Indicator and warning lamps Visual indicators informing the driver that a system is in operation or is switched off (indicator lamp) or has a fault (warning lamp). When the ignition is switched on Associated warnings Certain warning lamps come on for a few seconds in the instrument panel when the vehicle's ignition is switched on. When the engine is started, these same warning lamps should go off. If they remain on, before moving off, refer to the information on the warning lamp concerned.
Instruments Warning / indicator lamp State Cause Action / Observations Braking fixed. The braking system fluid level has dropped significantly. Top up with brake fluid recommended by CITROËN. If the problem persists, have the system checked by a CITROËN dealer or a qualified workshop. The braking system has a fault. Stop as soon as it is safe to do so. Park, switch off the ignition and contact a CITROËN dealer or a qualified workshop.
Instruments Warning / indicator lamp State Cause Action / Observations Dynamic stability control and traction control (DSC/ TRC) flashing. The DSC/TRC system is in action. The system optimises traction and improves the directional stability of the vehicle. fixed. The DSC/TRC system has a fault. Have it checked by a CITROËN dealer or a qualified workshop. Emission control system fixed. The emission control system has a fault. Contact a CITROËN dealer or a qualified workshop without delay.
Instruments Warning / indicator lamp 18 State Cause Action / Observations Front seat belts flashing, accompanied by an audible signal. The driver has not fastened or has unfastened their seat belt. The front passenger has unfastened their seat belt. Pull the strap then insert the tongue in the buckle. Airbags fixed. One of the airbags or seat belt pretensioners has a fault. Have it checked by a CITROËN dealer or a qualified workshop. ETG electronic gearbox fixed.
Instruments Warning / indicator lamp State Cause Action / Observations Under-inflation fixed. The pressure in one or more wheels is too low. Check the tyre pressures as soon as possible. This check should preferably be carried out when the tyres are cold. You must reinitialise the system after the adjustment of one or more tyre pressures and after changing one or more wheels. For more information, refer to the "Under-inflation detection" section. Stop & Start (VTi 68 S&S engine) flashing.
Instruments Warning / indicator lamp Keyless Entry and Starting system Lane departure warning system Active City Brake 20 State Cause Action / Observations flashing quickly. The steering column has not been unlocked. Change to "OFF" mode, then "ON" mode and turn the wheel slightly to unlock the steering column. flashing, accompanied by an audible signal. The battery in the electronic key is discharged. Replace the battery. Refer to the corresponding section.
Instruments Operation indicator lamps 1 Illumination of one of the following indicator lamps confirms that the corresponding system has been switched on. It may be accompanied by an audible signal. Warning / indicator lamp State Cause Action / Observations Left-hand direction indicator flashing with buzzer. The lighting stalk is pushed down. Right-hand direction indicator flashing with buzzer. The lighting stalk is pushed up. Sidelamps or dipped beam headlamps fixed.
Instruments Warning / indicator lamp 22 State Cause Action / Observations Parking brake fixed, accompanied by an audible signal. The parking brake is applied or not properly released. Release the parking brake to switch off the warning lamp, keeping your foot on the brake pedal. Observe the safety recommendations. For more information on the parking brake, refer to the corresponding section. Passenger's front airbag fixed in the seat belt and passenger's front airbag warning lamps display.
Instruments Warning / indicator lamp Gear efficiency indicator State Cause Action / Observations fixed. You can change up. For more information, refer to the corresponding section. 1 You can change down (only for the VTi 68 engine). Speed limiter (VTi 68 engine) fixed. The speed limiter is active. Lane departure warning system fixed. The button has been pressed. The system is operational: it has detected road markings to the left and/or right.
Instruments Deactivation indicator lamps If one of the following indicator lamps comes on, this confirms that the corresponding system has been switched off intentionally. This may be accompanied by an audible signal. Warning / indicator lamp 24 State Cause Action / Observations Passenger's front airbag fixed, in the seat belt and front passenger's airbag warning lamps display. The control switch, located in the glove box, is set to the OFF position. The passenger's front airbag is deactivated.
Instruments Warning / indicator lamp State Cause Action / Observations Stop & Start (VTi 68 S&S engine) fixed. The Stop & Start system has been deactivated. Reactivate the system by pressing the button again. For more information, refer to the corresponding section. Active City Brake fixed. The Active City Brake system has been deactivated. Reactivate the system by pressing the button again. For more information, refer to the corresponding section.
Instruments Indicators Fuel gauge Total/trip distance recorder When the ignition is switched on, the distance recorder selected when the engine was switched off is displayed. Press one of the buttons 1 to alternate the distance display: total with "ODO" (odometer) displayed, trip with "TRIP" displayed. To reset the trip recorder to zero, when it is displayed, press and hold one of the two buttons 1. This indicates the quantity of fuel available: 1/1 and six bars, the fuel tank is full.
Instruments Trip computer System that gives you information on the journey in progress (range, fuel consumption…). Information display 1 Trip reset Ambient temperature In certain situations, the ambient temperature may only be displayed after a delay or not at all, in particular: when stationary or at low speed (less than about 16 mph (25 km/h), where there is too much variation in temperature (entering or leaving a garage, a tunnel...), during very short journeys (less than about 2 minutes).
Instruments With the touch screen tablet Trip computer, a few definitions If your vehicle has a touch screen tablet, you can view information on the current journey. Range Average fuel consumption (miles or km) The distance which can still be travelled with the fuel remaining in the tank (related to the average fuel consumption over the last few miles (kilometres) travelled). (mpg or l/100 km or km/l) Calculated since the last trip computer reset.
Instruments Setting the time Audio system The time is adjusted using the "MENU" knob: press the knob for access to menus and to confirm a selection, turn the knob to select a function, an item in a list. You can go back to the previous step at any time by using the "Back" button. 1 F Press the knob for access to the menus. F Turn the knob to select "CLOCK". F Press the knob to confirm. The hours figure flashes. F Turn the knob to adjust the hours. F Press the knob to confirm. The minutes figure flashes.
Instruments Touch screen tablet Press on "Configuration". Adjust the hours and minutes using the virtual arrows in the screen. Press on "General". Choose the time format. Press on "OK" to confirm and quit the menu. Select "Clock".
Access Keys The keys allow you to switch on the ignition and operate the locks on the front doors, the boot, the steering lock and the passenger's front airbag deactivation switch. Locking Unlocking - - - Insert the key in one of the front door lock barrels and turn it towards the rear of the vehicle to lock the door in question. Insert the key in the boot lock barrel and turn it to the right to lock the boot.
Access Remote control This is used to lock, unlock and locate the vehicle at a distance. Unfolding / Folding the key Locking F Press the closed padlock to lock the vehicle. Locating your vehicle F Press the closed padlock to locate your locked vehicle in a car park. The direction indicators flash once. This is indicated by lighting of the direction indicators for a few seconds. After locking, if you notice that a door is not closed properly, close it then lock the vehicle again.
Access 2 Changing the remote control battery Battery ref.: CR 2016 / 3 volts. F Unclip the cover using a small screwdriver in the cut-out. F Lift off the cover. F Remove the old battery from its housing. F Fit the new battery in its place, observing the direction of fitment. F Clip the cover in place. Do not discard the remote control batteries, they contain metals which are harmful to the environment. Take them to a CITROËN dealer, or to an approved collection point.
Access Keyless Entry and Starting system System that allows the opening, closing and starting of the vehicle while keeping the electronic key on your person. Unlocking the vehicle Electronic key This electronic key can also be used as a remote control. It includes an integral emergency key. For more information on the remote control, refer to the corresponding section.
Access 2 Locking the vehicle If one of the doors or the boot is still open or if the electronic key for the Keyless Entry and Starting system has been left inside the vehicle, you are warned by an audible signal and the central locking does not take place. Locking F With the electronic key in the recognition zone, press one of the buttons on the front door handles or press the button on the boot sill.
Access Emergency procedure Saving the electronic key battery To preserve the battery, it is possible to prevent the electronic key working (no reception of radio waves). F Press on the open padlock twice, while pressing on and holding the closed padlock. The integral key is used to lock and unlock the vehicle when the electronic key cannot operate and in the event of a fault with the Keyless Entry and Starting system: cell battery discharged, vehicle battery discharged or disconnected, ...
Access Changing the battery of the electronic key Lost keys Go to a CITROËN dealer with the vehicle's registration document, your personal identification documents and if possible the key code label. The CITROËN dealer will be able to look up the key code and the transponder code required to order a new key.
Access Doors Locking/unlocking from the inside Door open Vehicles without central locking Pressing button A locks/unlocks the driver's door only. Vehicles with central locking To lock/unlock a door, press/pull button A. Pressing button A, driver's side, locks/unlocks all of the doors and the boot. Pressing button A, passenger's side, locks/ unlocks just that door. Operating the handle always opens the door, even if it is locked.
Access Locking / unlocking and opening the boot Using the key - - Insert the key in the lock barrel and turn it to the right to unlock and release the tailgate. The vehicle remains locked. Raise the tailgate by the exterior handle to open it. As soon as you close the tailgate, it locks again. Using the remote control 2 F Press the open padlock to unlock the vehicle and boot. F Press the opening button to release the tailgate. F Raise the tailgate by the exterior handle to open it.
Access Using the Keyless Entry and Starting system Boot release System for mechanical unlocking of the boot in the event of a battery or central locking malfunction. Unlocking F With the electronic key on your person, press the boot opening control to unlock and release the tailgate. The vehicle is unlocked as well. F Raise the tailgate by the exterior handle to open it.
Access Front electric windows* Rear quarter windows The driver has controls for both front windows. On the 5-door versions, system for ventilation of the rear seats by the partial opening of the window. Opening 2 The electric windows do not work with the ignition off. 1. 2. Left hand front electric window. Right hand front electric window. After the ignition has been switched on, press one of the control switches to open or pull to close the window.
Access Electric fabric roof* Your vehicle may be fitted with an electrically operated fabric roof. Electric opening and closing Operation of the roof is possible with the ignition on and when driving. In order to maintain the state of charge of the battery, it is recommended that the roof be operated with the engine running. The roof is opened and closed by pressing the control at the interior lamp, in the opening direction 1 and in the closing direction 2.
Access Opening Closing F Briefly press the control in the opening direction to open the roof in stages. or F Press and hold the control in the opening direction, until the manoeuvre is complete, to open the roof completely. Pressing again stops the movement of the roof. F Briefly press the control in the closing direction to open the the roof in stages. or F Press and hold the control in the closing direction, until the manoeuvre is complete, to close the roof to position 1.
Access Aero-acoustic deflector Precautions for use Never place objects on the roof, whether open or closed. Never sit on or place objects on the transverse roof support when the roof is open. To avoid damaging the roof, do not open it under snowy or frosty conditions. Never use sharp tools to remove ice or accumulations of snow on the roof.
Access Recommendations on care of your vehicle The general recommendations on the care of your vehicle are given in the maintenance and warranty guide. Fabric roof Before washing the fabric roof, first remove as much dirt as possible from the surface using a soft brush or a vacuum cleaner. To avoid damaging the roof. never use a high pressure jet wash, never wash your vehicle in an automatic roller-brush car wash. Allow the vehicle to dry in a shaded area and avoid direct exposure to the sun.
Ease of use and comfort Front seats with manual adjustments As a safety measure, seat adjustments should only be carried out when stationary. Forwards-backwards Seat backrest angle Driver's seat height* F Raise the control and slide the seat forwards or backwards. F Take the weight of the backrest with your body. F Turn the knob to obtain the desired angle. F Pull the control upwards to raise or push it downwards to lower, as many times as required, to obtain the position required.
Ease of use and comfort Access to the rear seats (3-door) 3 F Pull this control toward you to fold the seat backrest and move the seat forward. When returning the seat to its initial position, guide it back until the seat and backrest lock into place. Ensure that no person or object prevents the seat slide from returning to its initial position. Check that the seat belt has reeled in correctly so as to not impede access for passengers to the rear seats.
Ease of use and comfort Rear seats Your vehicle is fitted with a fixed one-piece cushion bench rear seat, and depending on version: a folding split (50/50) backrest, a folding one-piece backrest. Stowing the seat belts Folding the seat backrest Returning the backrest of the bench seat to its initial position 3-door The seat backrest is folded from the rear of the vehicle, with the boot open. F Place the head restraints in the low position. Refer to the "rear head restraints" section.
Ease of use and comfort Rear head restraints* 3 The rear head restraints can be removed and have two positions: high, position for use. low, storage position. To raise the head restraint, pull it upwards. To lower it, press lug A then the head restraint. To remove it: tilt the seat back slightly, move the head restraint to the high position, press lug A pulling the head restraint upwards at the same time. To refit it: tilt the seat back slightly, engage the rods of the head restraint in the openings.
Ease of use and comfort Mirrors Manual door mirrors Electric door mirrors Demisting - Defrosting Use the heated rear window switch. Refer to the "Rear screen demist - defrost" section. F Operate the lever in four directions to adjust the mirror. Adjustment Folding / Unfolding F Move control A to the right or to the left to select the corresponding mirror. F Move control B in all four directions to adjust. F Return control A to the central position. When parking, the mirrors can be folded manually.
Ease of use and comfort Steering wheel adjustment (with power steering) Manual rear view mirror Correct driving position Before taking to the road and to make the most of the ergonomics of your driving position, carry out these adjustments in the following order: backrest angle, cushion height, longitudinal position of the seat, height of the steering wheel, the interior and door mirrors. - The rear view mirror has two positions: day (normal), night (anti-dazzle).
Ease of use and comfort Ventilation 1. 2. 3. 4. 5. 52 Windscreen demisting/defrosting vent. Centre vent. Side vents. Air outlets to the front footwells. Air outlets to the rear footwells (depending on version).
Ease of use and comfort Recommendations for use If the interior temperature remains very high after a prolonged period parked in the sun, first ventilate the passenger compartment for a few minutes. For an even air distribution, make sure that you do not block the outside air inlet grille, the vents, the air passages and the air outlets to the footwells. Ensure that the passenger compartment filter, located behind the glove box in the heater unit, is in good condition.
Ease of use and comfort Heating The heating system only operates with the engine running. Temperature adjustment F Turn the control from blue (cold) to red (hot) to adjust the temperature to your wishes. Air distribution adjustment Centre vent and side air vents. Centre vent, side vents and footwells. Air flow adjustment F Turn the knob from position 1 to 4 to obtain the desired flow of air. Footwells. Windscreen and footwells. Windscreen.
Ease of use and comfort Manual air conditioning The air conditioning system only operates with the engine running. Temperature adjustment F Turn the control knob from blue (cold) to red (hot) to adjust the temperature to your requirements. Air flow adjustment F Turn the control knob from position 1 to position 4 to obtain a comfortable air flow. If you put the air flow control in position 0 (system off), the temperature is no longer controlled.
Ease of use and comfort Air intake / Air recirculation The recirculation of interior air insulates the passenger compartment from exterior odours and smoke. Return to exterior air intake as soon as possible to prevent deterioration of the air quality and the formation of mist. F Move the manual control to the left for the "Recirculation of interior air" position. F Move the manual control to the right to return to the "Exterior air intake" position.
Ease of use and comfort Automatic air conditioning The air conditioning system only operates with the engine running. Automatic programme We recommend that you use this mode. It provides optimised automatic control of all of the following functions: passenger compartment temperature, air flow, air distribution and air intake, in accordance with the comfort value that you have chosen. This system is designed to operate effectively in all seasons, with the windows and fabric roof closed.
Ease of use and comfort Temperature adjustment Air flow adjustment The value indicated in the screen corresponds to a level of comfort and not to a temperature in degrees Celsius or Fahrenheit. F Press this button to increase air flow. F Press this button downward to reduce the value and upward to increase it. A setting around 21 gives optimum comfort. However, depending on your requirements, a setting between 18 and 24 is normal.
Ease of use and comfort Air conditioning on / off F Press this button to stop the air conditioning. Stopping the air conditioning may cause some problems (humidity, misting). Automatic operation of the air conditioning is resumed when the button is pressed again. The "A/C" symbol is displayed. Switching the system off F Press the air flow adjustment button until the fan symbol disappears. 3 This action switches off all of the functions of the air conditioning system.
Ease of use and comfort Front demist - defrost These markings on the control panels indicate the control positions for rapid demisting or defrosting of the windscreen and side windows. During the winter period, direct the side air vents towards the side glasses to optimise their demisting and defrosting.
Ease of use and comfort Rear screen demist - defrost The control button is located on the heating / ventilation or air conditioning system control panel. Switching on Switching off The heated rear screen can only operate when the engine is running. F Press this button again to switch off the heated rear screen. The indicator lamp associated with the button goes off. F Press this button to demist/defrost the rear screen and, depending on version, the door mirrors.
Ease of use and comfort Courtesy lamp In this position, it comes on when one of the doors is opened. Boot lamp* This comes on automatically when the boot is opened and goes off automatically when the boot is closed. The courtesy lamp is permanently off. The courtesy lamp is permanently on. If left in the "permanently on" position, the courtesy lamp will switch off about 20 minutes after the last door is closed. * Depending on version.
Ease of use and comfort Front fittings 1. 2. 3. 4. 5. 6. 7. 8. 9. Sun visor. Glove box. Audio system, touch screen tablet or storage. 12 volt accessory socket (maximum 120 W). Do not exceed the power rating to avoid damaging your accessory. USB port. Auxiliary socket. Storage or cup holder. Cup holder. Door pockets. Storage for a bottle of water.
Ease of use and comfort 64 Sun visor Glove box 12 V accessory socket The sun visors are fitted with a vanity mirror, with a concealing flap and a map holder (or ticket holder). It can be used to hold the vehicle's handbook pack... F To open the glove box, raise the handle. It houses the front passenger airbag deactivation switch A and the reinitialisation button (B) for the tyre under-inflation detection system (depending on equipment).
Ease of use and comfort USB port Auxiliary socket The USB port and auxiliary Jack socket also allow connection of a smartphone. either by MirrorLinkTM connection using the USB port only, or by iPhone ® connection using both the USB port and the auxiliary Jack socket. These connections allow you to use certain applications on the telephone in the touch screen tablet. It permits the connection of a portable device, such as a digital audio player of the iPod ® type or USB memory stick.
Ease of use and comfort Mats Fitting Removal To remove the mat on the driver's side: F move the seat as far back as possible, F unclip the fixings, F remove the mat. Refitting To refit the mat on the driver's side: F position the mat correctly, F refit the fixings by pressing, F check that the mat is secured correctly. When fitting the mat for the first time, on the driver's side use only the fixings provided in the wallet attached. The other mats are simply placed on the carpet.
Ease of use and comfort Rear parcel shelf 3 To facilitate loading of the boot, the rear parcel shelf is fitted to the tailgate. When closing the tailgate, check that nothing could interfere with the return to position of the shelf. To remove the shelf: F open the tailgate, F unclip the two cords, F pull firmly on the shelf to disengage it from its hinges on the tailgate inner trim. You can then stow the shelf behind the front seats.
Ease of use and comfort Boot fittings 1. 2. Hooks. Temporary use spare wheel and tools. or Storage box. The wheel or storage box must be put in place under the carpet before loading the boot.
Ease of use and comfort Hooks Storage box 3 The hooks can be used to secure shopping bags. Maximum authorised load on the hooks: 2 kg. F Remove the boot carpet for access to the storage box. Depending on the configuration, it is laid out for storing: a towing eye, a temporary puncture repair kit, ... For versions with storage box: it must be in place before loading the boot.
Driving A few driving recommendations Observe the driving regulations at all times and remain vigilant whatever the traffic conditions. Pay close attention to the traffic and keep your hands on the wheel so that you are ready to react at any time to any eventuality. On a long journey, a break every two hours is strongly recommended. In difficult weather, drive smoothly, anticipate the need to brake and increase the distance from other vehicles.
Driving Starting - switching off the engine with the key Ignition switch Never leave the engine running in an enclosed area without adequate ventilation: internal combustion engines emit toxic exhaust gases, such as carbon monoxide. Danger of intoxication and death.
Driving F Immobilise the vehicle. Starting - switching off the engine with the Keyless Entry and Starting system F With a manual gearbox: put the gear lever into neutral. Changing the mode of the vehicle Switching off F With an ETG gearbox: place the selector at position N. F F F F If you use the ancillaries for a prolonged period, the vehicle will automatically switch to "OFF" mode after about 20 minutes. Be aware in order to avoid discharging the battery.
Driving Starting using the electronic key For vehicles fitted with an ETG gearbox: F With the electronic key inside the vehicle, put the gear selector at N and press the brake pedal. This indicator lamp comes on in the instrument panel. F Press and release the "START/ STOP" button. With the first press on the "START/ STOP" button, this indicator lamp flashes slowly in the instrument panel.
Driving Switching off using the electronic key Emergency starting F Immobilise the vehicle. F With a manual gearbox: put the gear lever into neutral. F With an ETG gearbox: place the gear selector at N. F With the electronic key inside the vehicle, press the "START/ STOP" button. The engine stops. The steering locks when a door is opened or on locking the vehicle. If the vehicle is not immobilised, the engine will not stop.
Driving Electronic engine immobiliser Emergency switch-off In the event of an emergency only, the engine can be switched of without conditions. To do this, press for more than 2 seconds, or make a minimum of 3 successive presses on the "START/STOP" button. In this case the steering column locks as soon as the vehicle stops.
Driving Manual parking brake 5-speed manual gearbox Engaging reverse gear Applying Releasing F Pull the parking brake lever up to immobilise your vehicle. F Pull the parking brake lever up gently, press the release button then lower the lever fully. When the vehicle is being driven, if the parking brake is still on or has not been fully released, this warning lamp comes on accompanied by an audible signal.
Driving ETG electronic gearbox The five-speed ETG electronic gearbox offers a choice between the ease of automated operation or the pleasure of manual gear changing. Gear selector Steering mounted control paddles Display in the instrument panel 4 R. Reverse: with your foot on the brake pedal, move the gear selector to the right then forward to select this position. N. Neutral: with your foot on the brake pedal, select this position to start the engine. E.
Driving Moving off Creep function Automatic (EASY) mode F With the parking brake applied, press the brake pedal then select position N. F Start the engine. This function makes manoeuvring the vehicle at low speed easier (parking, traffic jams…). After first placing the gear selector in position E, M or R, the vehicle moves off as soon as you take your foot off the brake pedal, at low speed, with the engine at idle. F Select position E using the gear selector.
Driving Manual mode Temporarily taking control of gear changes You can temporarily take control of gear changes using the "+" and "-" steering mounted control paddles. Gear change commands are only acted on if the engine speed allows. There is an audible signal if a command is not accepted. The gear engaged is displayed in the instrument panel. This function allows you to anticipate certain situations such as overtaking a vehicle or approaching a corner.
Driving Switching off The vehicle can be stopped whatever the position of the gear selector (N, E or R). However, there is an audible signal on opening the driver's door if the gear selector is not at position N. When the vehicle is stopped with the engine running, always put the gear selector to neutral N. There is a continuous audible signal if you turn the ignition switch to "OFF" with the vehicle in 2nd, 3rd, 4th or 5th gear.
Driving Gear shift indicator System which reduces fuel consumption by recommending the most appropriate gear. Operation Depending on the driving situation and your vehicle's equipment, the system may advise you to change gear. The gear engagement recommendations must not be considered compulsory. In fact, the configuration of the road, the amount of traffic and safety remain determining factors when choosing the best gear.
Driving Hill start assist System which keeps your vehicle immobilised temporarily (approximately 2 seconds) when starting on a gradient, the time it takes to move your foot from the brake pedal to the accelerator pedal. This system only operates when: the vehicle is completely stationary, with your foot on the brake pedal, certain conditions of slope are met, with the driver’s door closed. The hill start assist system cannot be deactivated.
Driving Stop & Start (VTi 68 S&S engine) The Stop & Start system puts the engine temporarily into standby - STOP mode during stops in the traffic (red lights, traffic jams, or other...). The engine restarts automatically - START mode - as soon as you want to move off. The restart takes place instantly, quickly and silently. Perfect for urban use, the Stop & Start system reduces fuel consumption and exhaust emissions as well as the noise level when stationary.
Driving Operating fault Special cases: STOP mode not available STOP mode is not invoked principally when: the driver's door is open, the driver's seat belt is not fastened, the engine is needed to maintain a comfortable temperature in the passenger compartment, demisting is active, some special conditions (battery charge, engine temperature, braking assistance, vehicle stopped on a steep gradient, high altitude...) where the engine is needed to assure control of a system.
Driving Maintenance Manual deactivation / reactivation Before doing anything under the bonnet, deactivate the Stop & Start system to avoid any risk of injury resulting from automatic operation of START mode. 4 At any time, press this button to deactivate the system. The Stop & Start system requires a 12 V battery of a special specification and technology. All work on this type of battery must be done only by a CITROËN dealer or a qualified workshop.
Driving Speed limiter (PureTech 82 engine) System which prevents the vehicle from exceeding the speed programmed by the driver. The speed limiter is switched on manually: this can be done whatever the speed of the vehicle. However, if you are driving at less than 20 mph (30 km/h), the programmed speed will be fixed at 20 mph (30 km/h). The speed limiter is paused by operation of the control. The programmed speed can be exceeded temporarily by pressing the accelerator firmly beyond the point of resistance.
Driving Switching on Pause Adjusting the speed limit setting You do not have to switch the speed limiter on in order to set the speed. F Press the end of the control stalk: the speed limiter mode is selected but is not switched on. F Switch the speed limiter on by pulling the control stalk towards you, if the speed displayed is suitable (by default, the last speed programmed).
Driving Temporarily exceeding the programmed speed F Press firmly on the accelerator pedal, going beyond the point of resistance, to exceed the programmed speed limit. The speed limiter is deactivated temporarily and the displayed programmed speed flashes. An audible signal accompanies the flashing of the programmed speed when exceeding the speed is not due to an action by the driver (steep hill...).
Driving Speed limiter (VTi 68 engine) System which prevents the vehicle from exceeding the speed programmed by the driver. The speed limiter is switched on manually: this can be done whatever the speed of the vehicle. However, if you are driving at less than 20 mph (30 km/h), the programmed speed will be fixed at 20 mph (30 km/h). The speed limiter is paused by operation of the control. The programmed speed can be exceeded temporarily by pressing the accelerator firmly beyond the point of resistance.
Driving Switching on Pause Adjusting the speed limit setting Once a speed is programmed, you can modify it by pushing and releasing the control stalk: up to increase the speed setting, down to reduce the speed setting. A brief push on the control stalk modifies the speed setting by + or - 1 mph (km/h). A maintained push on the control stalk modifies the speed setting by + or - 5 mph (km/h). F Press the end of the control stalk: the speed limiter is switched on.
Driving Temporarily exceeding the programmed speed F Press firmly on the accelerator pedal, going beyond the point of resistance, to exceed the programmed speed limit. The speed limiter is deactivated temporarily and the displayed programmed speed flashes. An audible signal accompanies the flashing of the programmed speed when exceeding the speed is not due to an action by the driver (steep hill...).
Driving Reversing camera The reversing camera is activated automatically when reverse gear is engaged. The reversing camera cannot in any circumstances replace the need for the vigilance on the part of the driver. The image is provided in the touch screen only, with an indication of the limit of the rear bumpers (red line) and the general direction of the vehicle (blue lines).
Driving Lane departure warning system System which detects the unintended crossing of longitudinal traffic lane markings on the ground, using a camera that recognises both solid and broken lines. To improve your safety, the camera analyses the image and then triggers a warning if the vehicle wanders over a lane marking (speed higher than 30 mph (50 km/h)). This system is particularly suitable for motorways and dual carriageways.
Driving Displays in the instrument panel Display in the instrument panel Comments Deactivation F Press this button again. The function has been activated (green indicator). The status of the system remains in the memory when the ignition is switched off. The system has identified a marking on the ground (green indicator). The system is alerting you that a road marking is being crossed (green and orange warning). The display of this warning is accompanied by an audible signal.
Driving Under-inflation detection System which automatically checks the pressures of the tyres while driving. The system monitors the pressures in the four tyres, once the vehicle is moving. It compares the information given by the four wheel speed sensors with reference values, which must be reinitialised every time the tyre pressures are adjusted or a wheel changed. The system triggers an alert as soon as it detects a drop in the inflation pressure of one or more tyres.
Driving Under-inflation alert Reinitialisation This is given by fixed illumination of this warning lamp, accompanied by an audible signal. F Reduce speed immediately, avoid excessive steering movements and sudden braking. F Stop the vehicle as soon as it is safe to do so. The loss of pressure detected does not always cause visible bulging of the tyre. Do not satisfy yourself with just a visual check.
Driving Operating fault Snow chains The system does not have to be reinitialised after fitting or removing snow chains. Reinitialisation of the system is done with the ignition on (ignition switch in the "ON" position or "ON" mode) and the vehicle stationary. The under-inflation alert can only be considered reliable if reinitialisation of the system is done with the four tyre pressures correctly set.
Lighting and visibility Exterior lighting control stalk Main lighting The various front and rear lamps of the vehicle are designed to adapt the driver's visibility progressively according to the ambient light level and weather: sidelamps, to be seen, dipped beam headlamps to see without dazzling other drivers, main beam headlamps to see clearly when the road is clear.
Lighting and visibility Selection ring for main lighting mode Turn the ring to position the symbol required facing the mark. Lighting off / Daytime running lamps. Sidelamps only. Model without AUTO lighting Dipped or main beam headlamps. Automatic illumination of headlamps. Dipping the headlamps 5 With dipped beam on, push the control stalk away from you to change to main beam. Pull the stalk toward you change back to dipped beam.
Lighting and visibility Foglamp selection ring The foglamp operates with the dipped and main beam headlamps. Rear foglamp. F Turn the ring forward and release to switch on the rear foglamp. When the lighting is switched off automatically (with AUTO model) or when the dipped beam headlamps are switched off manually, the foglamp and the sidelamps will remain on. F Turn the ring rearward and release to switch off all the lamps.
Lighting and visibility Automatic illumination of headlamps Switching on F Turn the ring to the "AUTO" position. Switching off F Turn the ring to another position. Using a sunshine sensor, if a low level of ambient light level is detected, the sidelamps and dipped beam headlamps come on automatically, without any action by the driver. When the ambient light returns to a sufficient level or the wipers are switched off, the lighting is switched off automatically.
Lighting and visibility Manual guide-me-home lighting* Switching on F Place the lighting control stalk in the "lighting off" or "AUTO" position. F With the ignition off, "flash" the headlamps using the lighting control stalk. The lighting comes on for about 30 seconds. Switching off Temporarily keeping the dipped beam headlamps on after the vehicle's ignition has been switched off makes the exit of the vehicle's occupants easier when the light is poor. * Depending on version.
Lighting and visibility Direction indicators F Left: lower the lighting stalk passing the point of resistance. F Right: raise the lighting stalk passing the point of resistance. Three flashes of the direction indicators F Press briefly upwards or downwards, without going beyond the point of resistance; the direction indicators will flash 3 times.
Lighting and visibility Wiper control stalk In wintry conditions, remove snow, ice or frost present on the windscreen, around the wiper arms and blades and the windscreen seal, before operating the wipers. Manual controls Windscreen wipers Wiping speed control stalk: raise or lower the stalk to the desired position. Single wipe. Do not operate the wipers on a dry windscreen. Under extremely hot or cold conditions, ensure that the wiper blades are not stuck to the windscreen before operating the wipers.
Lighting and visibility Windscreen wash Pull the wiper stalk towards you. The windscreen wash, then the windscreen wipers, operate for a pre-determined time. Rear wiper Turn the ring to this position for a steady wipe. Pushing the stalk away from you operates the wash during wiping. Rear screenwash 5 Wiper off, turn the control stalk towards you to operate the rear screenwash, accompanied by several sweeps of the rear wiper.
Safety Hazard warning lamps Horn Audible warning to alert other road users to an imminent danger. F Press one of the steering wheel spokes. F Press the central part of the steering wheel. When manoeuvring the vehicle, take care not to operate the horn unintentionally. 106 Visual warning with of all the direction indicators flashing to alert other road users to a vehicle breakdown, towing or accident. F Press this button, all of the direction indicators flash. They can operate with the ignition off.
Safety Electronic stability control (ESC) Electronic Stability Control (ESC) incorporating the following systems: anti-lock braking system (ABS) and the electronic brake force distribution (EBFD), emergency braking assistance, traction control (TRC), dynamic stability control (DSC).
Safety Operation Anti-lock braking system (ABS) and electronic brake force distribution (EBFD) Illumination of this warning lamp, accompanied by an audible signal, indicates that there is a fault with the ABS system, which could cause loss of control of the vehicle when braking. Drive carefully at reduced speed, and contact a CITROËN dealer or a qualified workshop.
Safety Deactivation Reactivation In exceptional conditions (starting a vehicle which is bogged down, stuck in snow, on soft ground...), it may be advisable to deactivate the DSC and TRC systems, so that the wheels can spin freely and regain grip. The TRC and DSC control systems are reactivated automatically every time the engine is started. However, it is recommended that these systems be reactivated as soon as possible. Deactivation of the TRC system only F Press this button briefly.
Safety Active City Brake Active City Brake is a driving assistance system that aims to avoid a frontal collision or reduce the speed of an impact if the driver does not react or reacts too late (brake application too late). This system is designed to improve driving safety. It remains the driver's responsibility to continuously monitor the state of the traffic and to assess the distances and relative speeds of other vehicles.
Safety Operation Three levels of operation are possible: ● Pre-collision alert: if a risk of collision with a vehicle is detected, a warning lamp comes on in the instrument panel together with an audible signal to encourage the driver to make an avoiding manoeuvre. The thresholds for triggering the alert can be set. ● Braking assistance: increases the braking started by the driver, only if a risk of collision is detected.
Safety Setting the alert thresholds Deactivation / Reactivation Press this button for more than 3 seconds. The alert thresholds determine how you want to be warned of the imminent risk of collision with the vehicle ahead of you. You can choose one of three thresholds: A. "Far", to be given early warning (cautious driving). B. "Normal". C. "Close", for a later warning (sporty driving). Press this button repeatedly to cycle through the thresholds. The default setting is "Normal".
Safety Operating limits The system only detects vehicles (cars, lorries) that are stationary or moving in the same direction as your vehicle. It does not detect small vehicles (bicycles, motorcycles), pedestrians or animals, nor non-reflective stationary objects. The system is not triggered or is interrupted if the driver: accelerates strongly (even if the speed limiter is on), or turns the steering wheel suddenly (avoiding manoeuvre).
Safety Operating faults Sensor fault The operation of the laser sensor may suffer interference from accumulations of dirt or misting of the windscreen or the presence of an object causing an obstruction (e.g.: bonnet open). In this case you are warned by the display of this flashing warning lamp in the instrument panel. Use the windscreen demisting and regularly clean the area of the windscreen in front of the sensor.
Safety Seat belts Front seat belts Rear seat belts The front seat belts are fitted with a pretensioning and force limiting system. This system improves safety in the front seats in the event of a front or side impact. Depending on the severity of the impact, the pretensioning system instantly tightens the seat belts against the body of the occupants. The pretensioning seat belts are active when the ignition is on.
Safety Front seat belt(s) warning lamp The warning lamp 1 comes on in the instrument panel if the front seat belt is not fastened or is unfastened. From about 12 mph (20 km/h) and for about 30 seconds, illumination of the warning lamp is accompanied by an audible signal. Beyond this time, if the seat belt is still not fastened, the tone of the audible signal changes and remains active for about a further 90 seconds. Seat belt not fastened / unfastened warning lamps 1. 2. 3.
Safety Advice The driver must ensure that passengers use the seat belts correctly and that they are all fastened before setting off. Wherever you are seated in the vehicle, always fasten your seat belt, even for short journeys. Do not interchange the seat belt buckles as they will not fulfil their role fully. The seat belts are fitted with an inertia reel permitting automatic adjustment of the length of the strap to your size. The seat belt is stowed automatically when not in use.
Safety Airbags Designed to contribute towards the safety of the occupants in the event of violent collisions. The airbags supplement the action of the forcelimiting seat belts.
Safety To assure the safety of your child, the passenger's front airbag must be deactivated when you install a rearward facing child seat on the front passenger seat. Otherwise, the child would risk being seriously injured or killed if the airbag were deployed. Deactivating the passenger's front airbag Reactivating the passenger's front airbag Only the passenger's front airbag can be deactivated. F With the ignition off, insert the key in the passenger airbag deactivation switch.
Safety Lateral airbags System which protects the driver and front passenger in the event of a serious side impact in order to limit the risk of injury to the chest, between the hip and the shoulder. Each lateral airbag is fitted in the seat backrest frame, door side.
Safety Curtain airbags System which contributes towards the improved protection of the driver and passengers in the event of a serious side impact in order to limit the risk of injury to the side of the head. Each curtain airbag is built into the pillars and the upper passenger compartment area.
Safety Advice For the airbags to be fully effective, observe the safety recommendations below: Sit in a normal upright position. Wear a correctly adjusted seat belt. Do not leave anything between the occupants and the airbags (a child, pet, object...), nor fix or attach anything close to the inflation trajectory of the airbags; this could cause injuries during their deployment. Never modify the original definition of your vehicle, particularly in the area directly around the airbags.
Safety General points relating to child seats Although one of CITROËN's main criteria when designing your vehicle, the safety of your children also depends on you.
Safety Child seat at the rear Rearward facing Forward facing When a rearward facing child seat is installed on a rear passenger seat, move the vehicle's front seat forwards and straighten the backrest so that the rearward facing child seat does not touch the vehicle's front seat.
Safety Child seat in the front* Rearward facing Forward facing When a rearward facing child seat is installed on the front passenger seat, adjust the seat to the fully back position, with the backrest straightened. The passenger's front airbag must be deactivated. Otherwise, the child would risk being seriously injured or killed if the airbag were to inflate.
Safety Deactivating the passenger's front airbag Never install a rearward facing child restraint system on a seat protected by an active front airbag. This could cause the death of the child or serious injury. The warning label present on both sides of the passenger's sun visor repeats this advice. In line with current legislation, the following tables contain this warning in all of the languages required.
Safety AR BG НИКОГА НЕ инсталирайте детско столче на седалка с АКТИВИРАНА предна ВЪЗДУШНА ВЪЗГЛАВНИЦА. Това може да причини СМЪРТ или СЕРИОЗНО НАРАНЯВАНЕ на детето. CS NIKDY neumisťujte dětské zádržné zařízení orientované směrem dozadu na sedadlo chráněné AKTIVOVANÝM čelním AIRBAGEM. Hrozí nebezpečí SMRTI DÍTĚTE nebo VÁŽNÉHO ZRANĚNÍ. DA Brug ALDRIG en bagudvendt barnestol på et sæde, der er beskyttet af en AKTIV AIRBAG. BARNET risikerer at blive ALVORLIGT KVÆSTET eller DRÆBT.
Safety MT Qatt m’ghandek thalli tifel/tifla marbut f’siggu dahru lejn l-Airbag attiva, ghaliex tista’ tikkawza korriment serju jew anke mewt lit-tifel/tifla NL Plaats NOOIT een kinderzitje met de rug in de rijrichting op een zitplaats waarvan de AIRBAG is INGESCHAKELD.
Safety Child seats recommended by CITROËN CITROËN offers a range of recommended child seats which are secured using a three point seat belt. Group 0+: from birth to 13 kg L1 "RÖMER Baby-Safe Plus" Installed in the rearward facing position. Groups 2 and 3: from 15 to 36 kg L4 "KLIPPAN Optima" From 22 kg (approximately 6 years), the booster is used on its own. L5 "RÖMER KIDFIX" Can be fitted to the vehicle's ISOFIX mountings. The child is restrained by the seat belt.
Safety Installation of child seats attached using the seat belt In accordance with European regulations, this table indicates the options for installing child seats secured using a seat belt and universally approved (a) in accordance with the weight of the child and the seat in the vehicle.
Safety a: b: c: d: e: Universal child seat: child seat that can be installed in any vehicle using the vehicle's seat belt. Group 0: from birth to 10 kg. Infant car seats and "car cots" cannot be installed on the front passenger seat. When installed on the 2nd row, they may prevent the use of the other seats. Refer the legislation in force in your country before installing your child on this seat.
Safety "ISOFIX" mountings To secure the child seat to the TOP TETHER: remove and stow the head restraint before installing the child seat in this seating position (refit it once the child seat has been removed), pass the strap of the child seat over the top of the seat backrest, between the apertures for the head restraint rods, fix the hook of the upper strap to the anchorage B, tighten the upper strap. Your vehicle has been approved in accordance with the latest ISOFIX regulation.
Safety ISOFIX child seats recommended by CITROËN CITROËN offers a range of ISOFIX child seats listed and type approved for your vehicle. Refer also to the child seat manufacturer's fitting instructions for information on installing and removing the seat. The ISOFIX BABY P2C base must be installed so that on the ISOFIX clamps, the Nos 3, 4 and 5 are visible. And the support leg must have 6 holes visible.
Safety "Baby P2C Midi" and its ISOFIX base (size categories: D, C, A, B, B1) "RÖMER Duo Plus ISOFIX" (size category: B1) Group 1: from 9 to 18 kg Group 1: from 9 to 18 kg Installed rearward facing using an ISOFIX base which is attached to the anchorage rings A. The base has a support leg, adjustable for height, which sits on the vehicle's floor. This child seat can also be used forward facing. This seat can not be secured with a seat belt.
Safety Table of locations for ISOFIX child seats In accordance with the European regulation, this table indicates the options for the installation of ISOFIX child seats on the vehicle seats fitted with ISOFIX mountings. In the case of the universal and semi-universal ISOFIX child seats, the child seat's ISOFIX size category, determined by a letter between A and G, is indicated on the child seat next to the ISOFIX logo.
Safety Recommendations on child seats The incorrect installation of a child seat in a vehicle compromises the child's protection in the event of an accident. Check that there is no seat belt or seat belt buckle under the child seat as this could destabilise it. Remember to fasten the seat belts or the child seat harnesses keeping the slack in relation to the child's body to a minimum, even for short journeys.
Safety Child lock This prevents the opening of the rear doors from the inside. The controls are located on the edge of each rear door. F Lower the control. Check the status of this safety device before switching on the ignition. This system is independent of the central locking.
Practical information Fuel tank The capacity of the fuel tank is approximately 35 litres. Low fuel level When the low fuel level is reached, this warning lamp comes on, accompanied by an audible signal. The message "LO FUEL" is displayed in place of the range. You have approximately 5 litres remaining. In certain driving conditions and depending on the engine, the distance which can be travelled with the fuel remaining may be less than 30 miles (50 km).
Practical information Quality of the fuel used for petrol engines Once refuelling is complete: F Fit and tighten the filler cap until you hear a click. When you release the filler cap, it turns slightly in the opposite direction. F Push the filler flap to close it. When you fill the fuel tank, do not continue after the 3rd cut-off of the pump; this could cause malfunctions. Your vehicle is fitted with a catalytic converter that reduces harmful exhaust emissions.
Practical information Snow chains In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking. Use only the chains designed to be fitted to the type of wheel fitted to your vehicle: Original tyre size 165/65 R14 165/60 R15 The snow chains must be fitted only to the front wheels. They must never be fitted to "space-saver" type spare wheels.
Practical information Electrical energy economy mode* System which manages the duration of use of certain functions to conserve a sufficient level of charge in the battery. After the engine has stopped, you can still use functions such as the audio system, windscreen wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum combined duration of twenty minutes. This period may be greatly reduced if the battery is not fully charged.
Practical information Accessories A wide range of accessories and genuine parts is available from the CITROËN dealer network. These accessories and parts are all suitable for your vehicle and benefit from CITROËN's recommendation and warranty. "Comfort": door deflectors, insulated module, sun blinds, scented air freshener, portable ashtray, coat hanger fitted to head restraint, reading lamp, front and rear parking sensors, centre armrest, cigarette lighter, ...
Practical information Installation of radio communication transmitters Before installing any after-market radio communication transmitter, you can contact a CITROËN dealer for the specification of transmitters which can be fitted (frequency, maximum power, aerial position, specific installation requirements), in line with the Vehicle Electromagnetic Compatibility Directive (2004/104/EC).
Practical information Changing a wiper blade Fitting roof bars Please refer to national legislation in order to comply with the regulations concerning the transportation of objects which are longer than the vehicle. Removing the front wiper blade F Raise the wiper arm. F Remove the wiper blade, sliding it towards the outside. Fitting the front wiper blade F Put the corresponding new wiper blade in place and fix it. F Fold down the wiper arm carefully.
TOTAL & CITROËN Partners in performance and protecting the environment Innovation in the search for performance For over 40 years, the TOTAL Research and Development departments have developed lubricants for CITROËN, to match the latest technical innovations on CITROËN vehicles, both for competition and for everyday motoring. For you, this is an assurance that you will obtain the best performance from your engine.
Practical information Bonnet Opening F Pull towards you the interior release lever, located in the lower dashboard. The cooling fan may start after switching off the engine: take care with articles and clothing that might be caught by the fan blades. F Push the exterior safety catch to the left and raise the bonnet. Do not open the bonnet when there is a very strong wind. When the engine is hot, handle the exterior safety catch and the stay with care (risk of burns).
Practical information Petrol engines 1. 2. 3. 4. 5. 6. 7. 8. 9. Screenwash fluid reservoir. Coolant header tank. Air filter. Brake fluid reservoir. Battery. Fusebox. Engine oil dipstick. Engine oil filler cap. Remote earth point. For access to the brake fluid reservoir, unclip the plastic cover at the base of the windscreen, pressing on the two tongues. Refer to the "Checking levels" section.
Practical information Checking levels Check all of these levels regularly, in line with the manufacturer's service schedule. Top them up if necessary, unless otherwise indicated. If a level drops significantly, have the corresponding system checked by a CITROËN dealer or a qualified workshop. Take care when working under the bonnet, as certain areas of the engine may be extremely hot (risk of burns) and the cooling fan could start at any time (even with the ignition off).
Practical information Coolant level Topping-up the engine oil Engine oil change Oil grade The oil must be the correct grade for your engine and conform to the manufacturer's recommendations. Refer to the under-bonnet view for the location of the oil filler cap on your vehicle. F Unscrew the filler cap for access to the filler orifice. F Pour in the oil in small quantities, avoiding spills onto the engine (risk of fire). F Wait a few minutes before checking the level again using the dipstick.
Practical information Brake fluid level The brake fluid level should be close to the "MAX" mark. If it is not, check the brake pad wear. Screenwash fluid level Changing the fluid Top up the level when necessary. Refer to the manufacturer's service schedule for details of the interval for this operation. Fluid specification Fluid specification The brake fluid must conform to the manufacturer's recommendations.
Practical information Checks Unless otherwise indicated, check these components in accordance with the manufacturer's service schedule and according to your engine. Otherwise, have them checked by a CITROËN dealer or a qualified workshop. 12 V battery The battery does not require any maintenance. However, check regularly that the terminals are correctly tightened (versions without quick release terminals) and that the connections are clean.
Practical information ETG gearbox The ETG gearbox does not require any maintenance (no oil change). Refer to the manufacturer's service schedule for the checking interval for this component. Brake pads Brake wear depends on the style of driving, particularly in the case of vehicles used in town, over short distances. It may be necessary to have the condition of the brakes checked, even between vehicle services.
In the event of a breakdown Temporary puncture repair kit Comprising a compressor and a sealant cartridge, it allows the temporary repair of a tyre so that you can drive to the nearest garage. It is designed to repair most punctures which could affect the tyre, located on the tyre tread or shoulder. Access to the kit Composition of the kit This kit is installed in the storage box, under the boot floor. 1. 2. 3.
In the event of a breakdown Repair procedure F Switch off the ignition. F Secure the speed limit sticker inside the vehicle. Avoid removing any foreign bodies which have penetrated into the tyre. 154 F Uncoil the pipe stowed under the compressor. F Connect the pipe from the compressor to the sealant cartridge. F Turn the sealant cartridge and secure it in the cut-out provided on the compressor. F Remove the valve cap from the tyre to be repaired, and place it in a clean area.
In the event of a breakdown If after around 5 to 7 minutes the pressure is not attained, this indicates that the tyre is not repairable; contact a CITROËN dealer or a qualified workshop for assistance. F Check that the compressor switch is at the "O" position. F Uncoil fully the electric cable, stowed under the compressor. F Connect the compressor's plug to the vehicle's 12 V socket. F Switch on the ignition.
In the event of a breakdown Checking / adjusting tyre pressures F Place the switch in the "O" position. F Remove the kit. F Drive immediately for approximately three miles (five kilometres), at reduced speed (between 15 and 35 mph (20 and 60 km/h)), to plug the puncture. F Stop to check the repair and the tyre pressure using the kit. 156 You can also use the compressor, without injecting sealant, to check and if necessary adjust the tyre pressures.
In the event of a breakdown Tyre under-inflation detection After repair of the tyre, the warning lamp will remain on until the system is reinitialised. For more information on under-inflation detection, refer to the corresponding section. F Start the compressor by placing the switch at the "I" position and adjust the pressure to the value shown on the vehicle's tyre pressure label. To deflate: press the black button on the compressor pipe, at the valve connector.
In the event of a breakdown Spare wheel Procedure for replacing a wheel with a damaged tyre by the spare wheel using the tools supplied with the vehicle. Parking the vehicle F As far as possible, immobilise the vehicle on level, stable, non-slippery ground. F Apply the parking brake. F Switch off the ignition ("OFF" mode for vehicles fitted with "Keyless Entry and Starting"). F Engage first gear or reverse for a manual gearbox. F Place the gear selector at position N for an ETG electronic gearbox.
In the event of a breakdown Access to the spare wheel and tools Depending on version, the spare wheel and tools are stowed in the boot under the floor. F Remove the boot carpet. F Remove the tool carrier. F Slacken the central wheel retaining bolt. F Remove the wheel. Tools provided The following tools are installed in a carrier, located in the centre of the spare wheel: 1. Wheelbrace. 2. Jack with handle. 3. Removable towing eye. Refer to the "Towing the vehicle" section.
In the event of a breakdown Removing a wheel F Remove the label from the middle of the spare wheel (indicating that a wheel needs repair), and fix it inside the vehicle, where the driver can see it. F Remove the wheel trim using the end of the wheelbrace. F Slacken the wheel bolts using the wheelbrace 1. F Position the foot of the jack 2 on the ground and ensure that it is directly below one of the jacking points A or B located on the underbody, closest to the wheel to be changed.
In the event of a breakdown Fitting a wheel F Raise the vehicle until there is sufficient space between the wheel and the ground, so that the (not punctured) spare wheel can be easily fitted. F Remove the bolts and put then in a clean place. F Remove the wheel. Fitting the "space-saver" type spare wheel If your vehicle is fitted with alloy wheels, it is normal to notice when tightening the wheel bolts that the washers do not come into contact with the "spacesaver" type spare wheel.
In the event of a breakdown After changing a wheel As soon as possible, have the tightness of the wheel bolts and the pressure of the spare wheel checked by a CITROËN dealer or a qualified workshop. Have the punctured tyre repaired or replaced and refit it to the vehicle as soon as possible. F Position the wheel on the hub. F Screw in the bolts fully by hand. F Pre-tighten the bolts using the wheelbrace 1 only. F Lower the vehicle to the ground. F Fold the jack 2 and detach it.
In the event of a breakdown Changing a bulb Front lamps 1. 2. 3. 4. 5. Sidelamps (W5W). Direction indicators (PY21W amber). Dipped beam headlamps (H7-55W). Main beam headlamps (H7-55W). LED* daytime running lamps. In some weather conditions (e.g. low temperature or humidity), the presence of misting on the internal surface of the glass of the headlamps and rear lamps is normal; it disappears after the lamps have been on for a few minutes.
In the event of a breakdown Sidelamps (W5W) Direction indicators (PY 21W amber) Dipped beam headlamps (H7 - 55W) F Turn the bulb holder one quarter of a turn and remove it. F Remove the bulb and change it. F Turn the bulb holder one quarter of a turn and remove it. F Remove the bulb and change it. If you encounter any difficulties, contact a CITROËN dealer or a qualified workshop. F Remove the protective cover by pulling on the tag. F Spread the spring to free the bulb holder.
In the event of a breakdown Main beam headlamps (H7-55W) LED daytime running lamps F Remove the protective cover by pulling on the tag. F Spread the spring to free the bulb holder. F Remove the bulb holder and change the bulb. To reassemble, carry out these operations in reverse order. If you encounter any difficulties, contact a CITROËN dealer or a qualified workshop. For the replacement of these lamps, contact a CITROËN dealer or qualified workshop.
In the event of a breakdown Rear lamps 1. 2. 3. 4. 166 Brake lamps (P21/5W) Sidelamps (P21/5W) Direction indicators (PY21W) Reversing lamp (P21W), near side Foglamp (P21W), offside These bulbs are changed by removing the lamp unit: F Open the boot. F Tip the plastic cover and remove the screw. F Move the boot trim firmly aside. Deformation of the trim is normal. F Unscrew the nut and remove it (take care not to drop it in the wing). F Remove the lamp unit by pulling it firmly outwards.
In the event of a breakdown Number plate lamps (W5W) F Insert a thin screwdriver into one of the cutouts in the lens. F Push it outwards to unclip it. F Remove the lens. F Change the faulty bulb. To refit, press on the lens to clip it in place. Third brake lamp (4 W5W bulbs) Direction indicator side repeaters (WY 5W amber) F With the boot open, unclip the plastic cover. F Press the metal clips to disengage the lamp. F Remove the lamp via the exterior of the tailgate.
In the event of a breakdown Changing a fuse The fuseboxes are located behind the dashboard in the passenger compartment and next to the battery under the bonnet. Access to tools The extraction tweezer is fixed at the front of the underbonnet fusebox. F Unclip the fusebox cover by pressing on the lug on the right. F Remove the tweezer.
In the event of a breakdown Replacing a fuse Before changing a fuse, it is necessary to F immobilise the vehicle and switch off the ignition, F switch off all electrical consumers, F identify the failed fuse using the fuse allocation tables and diagrams in the following pages, F identify and correct the cause of the problem.
In the event of a breakdown Dashboard fuses The fusebox is located below the dashboard (driver's side). F Unclip the plastic cover for access to the fuses. When you have finished, carefully refit the cover.
In the event of a breakdown Fuse N° Rating (A) 11 5 12 7.5 13 5 15** 14 Functions Steering lock - Fuel injection system - Electronic gearbox Airbags Instrument panel - Display Screen - Stop & Start Steering - Fuel injection system - Brake lamps 7.5* 7.5** 15 Fuel injection system - Stop & Start 10* 16 7.
In the event of a breakdown Fuse N° Rating (A) Functions 20 40 Air conditioning - Engine self-diagnosis - Sidelamps - Number plate lamps - Rear foglamp - Rear lamps - Lighting dimmer Brake lamps - Third brake lamp - Fuel injection system - ABS system - VSC system - Electronic gearbox - "Keyless Entry and Starting" system - Electric windows 21 30 Fuel injection system - Stop & Start - Main distribution unit 22** 7,5 Fuel injection system 23** 20 Fuel injection system - Stop & Start 24 25 Ma
In the event of a breakdown Fuses under the bonnet F Unclip the fusebox cover by pressing on the lug on the right, for access to the fuses. When you have finished, carefully refit the cover. Fuse N° Rating (A) 1 10 Right hand dipped beam 2 10 Left hand dipped beam - Headlamp adjustment 3 7.5 Right hand main beam 4 7.5 Left hand main beam 5* 15 Fuel injection system 6* 7.5 Fuel injection system 7* 15 Fuel injection system 8* 7.5 Cooling fan 9 7.5 Air conditioning 10** 7.
In the event of a breakdown ** VTi 68 engine. 174 Fuse N° Rating (A) 13 10 Horn 14 30 Distribution units 15** 7.5 Electronic gearbox 16 7.5 Fuel injection system 17 7.0 Keyless Entry and Starting system 18** 7.5 Battery 19 25 Fuel injection system - Cooling fan 20 30 Starter motor 21 7.5 Steering lock 22 25 Front lamps 23 7.5 Fuel injection system 24 7.
In the event of a breakdown Fuse N° Rating (A) 27 7.5 VSC system 28 60 Passenger compartment fusebox 29** 125*** Functions Heated rear screen and door mirror heating - Electric fabric roof - ABS system - VSC system - Cooling fan - LED daytime running lamps 50 Electronic gearbox 40 Stop & Start 50 Power steering 30 31 50* 32 30 Cooling fan 40 * PureTech 82 engine. ** VTi 68 engine. *** This fuse must be replaced only by a CITROËN dealer or a qualified workshop.
In the event of a breakdown 176 Fuse N° Rating (A) 35 20 Spare fuse 36 30 Spare fuse 37 20 Heated rear screen and door mirror heating 38 30 ABS system - VSC system 39 7.5 Instrument panel - Display screen 40 7.
In the event of a breakdown 12 V battery Procedure for starting the engine using another battery or charging a discharged battery. General points Access to the battery Lead-acid starter batteries Batteries contain harmful substances such as sulphuric acid and lead. They must be disposed of in accordance with regulations and must not, in any circumstances, be discarded with household waste. Take used remote control batteries and vehicle batteries to a special collection point.
In the event of a breakdown Starting using another battery When your vehicle's battery is discharged, the engine can be started using a slave battery (external or on another vehicle) and jump lead cables or a battery booster. Never try to start the engine by connecting a battery charger. Never use a 24 V or higher battery booster. First check that the slave battery has a nominal voltage of 12 V and a capacity at least equal to that of the discharged battery.
In the event of a breakdown Charging the battery using a battery charger Before disconnecting the battery Wait 2 minutes after switching off the ignition before disconnecting the battery. Close the windows, the fabric roof and the doors before disconnecting the battery. Following reconnection of the battery Following reconnection of the battery, switch on the ignition and wait 1 minute before starting to permit initialisation of the electronic systems.
In the event of a breakdown Towing the vehicle Your vehicle can only be towed from the front. Failure to follow this advice may result in damage to certain components (braking, transmission, ...) and the absence of braking assistance when the engine is restarted. F Unlock the steering and release the parking brake. F Switch on the hazard warning lamps on both vehicles. Never use the radiator crossmember. F Take the removable towing eye stowed in the tool box, under the boot carpet.
Technical data Engines Petrol engine Gearbox Model code: P... VTi 68 Manual (5-speed) ...B1A ...H1A ...P1A ...W1A SCFBB SCFBC ETG electronic (5-speed) ...B1C ...H1C ...P1C ...W1C SCFBB SCFBC VTi 68 S&S PureTech 82 Manual (5-speed) Manual (5-speed) ...B1B ...H1B ...P1B ...W1B SCFB2 SCFB3 ...B1A ...H1A ...P1A ...W1A AHMTB AHMTC Cubic capacity (cc) 998 998 998 1 199 Bore x stroke (mm) 71 x 84 71 x 84 71 x 84 75 x 90.
Technical data Weights (in kg) Engine Gearbox Model code: P... VTi 68 Manual (5-speed) ...B1A ...H1A ...P1A ...W1A SCFBB SCFBC ...B1C ...H1C ...P1C ...W1C SCFBB SCFBC PureTech 82 Manual (5-speed) Manual (5-speed) ...B1B ...H1B ...P1B ...W1B SCFB2 SCFB3 ...B1A ...H1A ...P1A ...W1A AHMTB AHMTC Kerb weight 840 860 855 865 Unladen weiight* 915 935 930 940 Gross vehicle weight (GVW) 1 240 1 240 1 240 1 240 Gross train weight (GTW) 1 240 1 240 1 240 1 240 ...B1: 3-door version.
Technical data Dimensions (in mm) These dimensions have been measured on an unladen vehicle.
Technical data Identification markings A. V ehicle Identification Number (VIN) on the body. This number is engraved on the middle door pillar, or the rear door pillar, right hand side. B. Vehicle Identification Number (VIN) in the passenger compartment. This is engraved on the crossmember, under the front right seat. 3-door 5-door C. Tyre label. This label on the middle door pillar, driver's side, carries the following information: the tyre sizes, the tyre pressures.
Audio and Telematics 7-inch touch screen tablet Multimedia system - Bluetooth® telephone - Mirror Screen® - GPS navigation Contents First steps 186 Steering mounted controls 188 189 Menus Audio source 190 Radio 194 DAB (Digital Audio Broadcasting) radio 196 Media 198 Telephone 202 Configuration 208 Mirror Screen® - iPhone ® connections 212 Mirror Screen® - MirrorLinkTM connections 216 220 Navigation Frequently asked questions 231 The temperature of a telephone may increase when connected by MirrorLinkTM.
Audio and Telematics First steps In ACC mode or when starting the vehicle, the system comes on. Use the button at bottom right of the screen for access to the main menus. A second press returns the system to the last source activated, then press the virtual buttons in the screen. 186 In the event of prolonged exposure to sunlight and very hot conditions, the system may go into stand-by (screen and sound completely off) for at least 5 minutes.
Audio and Telematics Short-cuts: using virtual buttons in the top bar of the screen, it is possible to go directly to the choice of audio source, telephone functions or "Mirror Screen®" mode. Pressing with more than one finger is not recognised. The screen can be used when wearing gloves. To clean the screen, use a soft nonabrasive cloth (spectacles cloth) without any additional product or a damp cloth. Do not use pointed objects on the screen. Do not touch the screen with wet hands.
Audio and Telematics Steering mounted controls Radio: change to preset radio stations in ascending order. Media: next track. Radio: change to preset radio stations in descending order. Media: previous track. Change multimedia source. Press and hold: mute / restore sound from the radio or pause media sources. Increase volume. Accept an incoming call. Other than on a call: press to open the list of contacts; a second press opens the calls history. Decrease volume. Reject the incoming call.
Audio and Telematics Menus Audio source Select an audio source, a radio station, view photos or videos. Connection Run certain applications on a your smartphone in the touch screen. Enter navigation settings and select a destination. Telephone Connect a telephone by Bluetooth ®. Configuration Adjust settings for sounds or brightness and activate or deactivate certain settings according to use. Vehicle information Access the trip computer. .
Audio and Telematics Audio source Level 1 190 Level 2 Level 3
Audio and Telematics Level 1 Level 2 FM radio configuration Audio source Level 3 Update the list of stations Update the list to take account of reception. List of stations Choose to list by "Broadcaster" or "Alphabetic". FM traffic announcements FM alternative frequencies Change regional code FM Comment Activate or deactivate options. FM radiotext List of preset stations. Presets Stations List of radio stations received. Manual Search for stations step by step or automatically.
Audio and Telematics Level 1 192 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comment Scan Random play Audio source USB Repeat play Choose the play setting. Previous track Play Next track First connection, refer to the telephone section. Telephone System configuration Random play Audio source Bluetooth audio Activate or deactivate options. Audio play Repeat play Previous track Choose the play setting. Play Next track Normal Audio source Screen format Stretched Choose the most suitable screen format.
Audio and Telematics Radio Selecting a station Press on "Audio source" to display the carousel of sound sources. Select "FM". Select the "Station" tab then select a radio station from the stations received. Changing a radio frequency Press on "Audio source" to display the carousel of sound sources. The exterior environment (hills, buildings, tunnel, car park, below ground...) may prevent reception, even in RDS alternative frequencies mode.
Audio and Telematics Preset a station Select a radio station or frequency (refer to the "Changing a frequency" section). Activate/ Deactivate RDS Press on "Audio source" to display the carousel of audio sources. Select "FM". Select the "Presets" tab then make a long press on one of the numbered preset locations. Select "FM radio configuration". Activate/deactivate "Change of regional code".
Audio and Telematics DAB (Digital Audio Broadcasting) radio Short-cut: access to the choice of audio source, telephone functions and SmartphoneLink ® mode. Display the name and "Radiotext" for the current station. Display "DAB" waveband. Preset stations. Short press: select the preset radio station. Long press: preset a radio station. Select the radio station. "DAB radio configuration". "Next multiplex". "Previous multiplex". Previous radio station. Next radio station.
Audio and Telematics Digital radio Digital radio provides higher quality reception and also the display of additional information (album artwork...) on the radio station being listened to. Select "DAB" in the carousel of audio sources. The range of multiplexes available is displayed in alphabetical order. Select the "Station" tab then select a station from those received. Press on "Audio source" to display the carousel of audio sources. Select "DAB". Select the "Manual" tab to search for a station.
Audio and Telematics Media USB player Auxiliary (A/V) input Insert a USB memory stick into the USB port or connect a USB peripheral device to the USB port using a suitable cable (not supplied). Connect a portable device (MP3 player…) to the auxiliary JACK socket using an audio cable. The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection.
Audio and Telematics Selection of source Press on "Audio source" to display the carousel of audio sources. Select the "USB" auxiliary source. Pressing the "MODE" button at the steering mounted controls changes to the next media, available if the source is active. OR Select the "A/V" auxiliary source. Use the play settings at the bottom of the screen. .
Audio and Telematics Information and advice The audio system plays files with the extension: ".wma", type Ver7 and Ver8 with bit rate between 48 and 192 Kbps and type Ver9 with bit rate between 48 and 320 Kbps. ".aac", with bit rate between 16 and 320 Kbps. ".mp3 - MPEG1" with bit rate between 32 and 320 Kbps and ".mp3 - MPEG2" with bit rate between 8 and 160 Kbps. The sampling rates supported are 11, 22, 44 and 48 KHz. Use only USB memory sticks formatted FAT32 (File Allocation Table).
Audio and Telematics Audio streaming Connecting Apple® players Streaming allows audio files on your telephone to be played via the vehicle's speakers. Connect the telephone: see the "Telephone" section, then "Bluetooth". Choose either "Connect all" or "Connect as audio player" profile. If play does not start automatically, it may be necessary to start audio play from the telephone. Control is from the peripheral device or by using the audio system controls.
Audio and Telematics Telephone Level 1 202 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comment Contacts After making choices, start the call. Favourites Call history Enter a number Enter a number then start the call. Call Connect the telephone Telephone Audio player Select the services to use on the peripheral device.
Audio and Telematics Pairing a Bluetooth® telephone As a safety measure and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Activate the telephone's Bluetooth function and ensure that it is "visible to all" (telephone configuration). Press on "Audio source" to display the carousel of audio sources. Select "Bluetooth audio".
Audio and Telematics Automatic reconnection The services available depend on the network, the SIM card and the compatibility of the Bluetooth telephone used. Check the telephone manual and with your network provider for details of the services available to you. When the ignition is switched on, the last telephone connected when the ignition was switched off reconnects automatically, if this connection made had been activated during the pairing procedure (see previous pages).
Audio and Telematics Receiving a call Making a call Calling a new number An incoming call is announced by a ring and a superimposed display in the screen. Make a short press on this steering mounted button to accept an incoming call. Press on this steering mounted button to reject a call or to end a call. Use of the telephone is not recommended while driving. We recommended that you park safely or make use of the steering mounted controls. Calling a contact Press on "Telephone".
Audio and Telematics Managing contacts / Entries Ringtones Calling a recently used number Press on "Telephone". OR Press this steering mounted button to open the list of contacts; a second press opens the calls history. Select the "Calls history" tab. Select the desired contact from the list offered to start the call. Press on "Telephone" to display the primary page. Press on "Telephone". Select "Telephone/message configuration". Select "Telephone/message configuration". Select "Contacts config.
Audio and Telematics Configuration Level 1 208 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Clock Level 3 OK Select the language. Language Activate or deactivate beep mode. Beep Delete all Store images in a folder initially called "Startupimage", before copying them to the system. OK Save the settings. Transfer Configuration General Personalise the startup image Comment Save settings. Activate or deactivate animation mode. Animation Delete Delete personal data Do not delete Update software Choose settings, activate or deactivate options.
Audio and Telematics Level 1 210 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Telephone Comment Select the services to use on the peripheral device. Audio player Connect a new peripheral device. Add Configuration Telephone Bluetooth System configuration Audio player Select the services to use on the peripheral device. Cancel Remove Disconnect and remove a peripheral device from the list. Connect the telephone Sounds configuration Configuration Contacts/call history configuration See the telephone section.
Audio and Telematics Mirror Screen® - iPhone® connections Using the USB port and JACK auxiliary socket 212 As a safety measure and because it requires the sustained attention of the driver, using a smartphone while driving is prohibited. It is preferable to secure the smartphone so that it cannot become a projectile. Operations must be carried out with the vehicle stationary.
Audio and Telematics Download the "AppinCar ®" smartphone application available from the App Store ®. The download of the application must be done with the vehicle stationary. As a safety measure and for ease of use: certain applications on your smartphone are not carried over to the system screen. certain applications operate only when the vehicle is stationary. Connect the smartphone to the USB port or JACK auxiliary socket using a suitable cable, available as an accessory from CITROËN dealers.
Audio and Telematics Level 1 214 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments FM AM Connection DAB Audio source USB Choose the audio source. Choose settings, activate or deactivate options. Bluetooth audio A/V Contacts Connection Favorites Call history Telephone Enter a number After making choices, start the call. Choose settings, activate or deactivate options. Telephone/message configuration Connection Use the "AppinCar ®" applications via the system.
Audio and Telematics Mirror Screen® - MirrorLinkTM connections Using the USB port 216 As a safety measure and because it requires the sustained attention of the driver, using a smartphone while driving is prohibited. It is preferable to secure the smartphone so that it cannot become a projectile. Operations must be carried out with the vehicle stationary. Connection between the system with a smartphone by Mirror Screen allows the driver to operate certain applications on the smartphone in the screen.
Audio and Telematics Depending on the model of your smartphone, the manufacturer may require you to first download a dedicated application. The download of the application must be done with the vehicle stationary. As a safety measure and for ease of use: certain applications on your smartphone are not carried over to the system screen. certain applications operate only when the vehicle is stationary. Connect a compatible smartphone to the USB port using the USB supplied with the smartphone.
Audio and Telematics Level 1 218 Level 2 Level 3
Audio and Telematics Level 1 Level 2 Level 3 Comments FM AM Connection DAB Audio source USB Choose the audio source. Choose the settings, activate or deactivate options. Bluetooth audio A/V Contacts Favorites Connection Call history Telephone Enter a number After making choices, start the call. Choose the settings, activate or deactivate options. Telephone/message configuration Connection MirrorLink™ Use the "MirrorLink™" applications via the system.
Audio and Telematics Navigation Level 1 Level 2 17/08/15 25 m 68 km/h 14:48 220
Audio and Telematics Level 1 Level 2 Comments The compass is available only with a fixed position. The direction is available only with a fixed position. The representation of the sky is facing north, as for the compass. Connection The satellite icons are represented in yellow for a weak signal and in green for a strong signal. GPS The satellite signal levels are represented in yellow for a weak signal and in green for a strong signal.
Audio and Telematics Level 1 Level 2 Level 3 25 m 68 km/h 14:48 17/08/15 222
Audio and Telematics Level 1 Level 2 Level 3 Comments Press the change of direction indicator to open the list of changes of direction. Press the time information area to alternate the information displayed: estimated time of arrival / remaining time. Navigation Return home Press the distance information area to alternate the information displayed: remaining distance / distance travelled. Go directly to the navigation menu. Map orientation and scale. Press to zoom in. Navigation Press to zoom out.
Audio and Telematics Level 1 224 Level 2
Audio and Telematics Level 1 Navigation User settings Level 2 Comments Language Display the list of text languages available. Time zone Display the list of time zones. Volume Set the volume for voice instructions, with "Test" and "Mute" (off) buttons. Units Change between metric and imperial units for distance and altitude. Date and time format dd/mm/yyyy or mm/dd/yyyy 12.00 (midday) + 12.00 (midnight) or 24.00. Regarding Display information on the navigation system: mapping software version.
Audio and Telematics Level 1 Level 2 Level 3 W 226 N S N 44 23 E 009 21 E 21 32 0 1 2 3 4 5 6 7 8 9
Audio and Telematics Level 1 Level 2 Level 3 Select settings and enter the destination address. Address or postcode POI Comments Nearby Select settings and enter the destination address. Near city Allows a town or city to be entered using a virtual keypad. Near destination Available only with an active route. Favorites Displays the list of favorites. At first use, the list is empty. Select on map Allows the map to be explored and an item to be set as the destination.
Audio and Telematics Choosing a new destination Towards a new destination Press on "Connection" in the system. Towards a recent destination Enter the "Street" and the "House number". Press "OK" to confirm. Select "NAVI". Press on "Connection" from the system. Select "NAVI". Once the address has been entered, press "OK" to confirm. Select "Navigation". Select "Navigation". In the contextual menu, press the "Go to" button. Select "Go to". Select "Address or postcode".
Audio and Telematics Towards points of interest (POI) Points of Interest (POI) are listed under different categories. Choose the search option and select the POI in the list of categories: Press on "Connection" from the system. Select "NAVI". "Nearby", or "Near city", Select "Navigation". or Select "Go to". Select "POI". "Near destination", or Enter a name using the virtual keypad, with the "Search by name" option. Press "OK" to confirm. .
Audio and Telematics Towards a point on the map Press on "Connection" from the system. Select "NAVI". Towards GPS coordinates Press on "Connection" from the system. Press the "Go to" button on the left of the map. Select "NAVI". Select your route from the list offered. Select "Navigation". Select "Navigation". Press "OK" to start navigation. Select "Go to". Select "Go to". Press on the secondary page. Select "Select on map". Select "Coordinates". Move around the map by dragging with a finger.
Audio and Telematics Frequently asked questions The following table groups together the answers to the most frequently asked questions concerning your audio system. Telephone, Bluetooth® QUESTION I cannot connect my Bluetooth telephone. ANSWER The telephone's Bluetooth function may be switched off or the telephone may not be visible. SOLUTION - Check that your telephone's Bluetooth function is switched on. Check in the telephone settings that it is "visible to all".
Audio and Telematics USB, portable player QUESTION 232 ANSWER SOLUTION There is a long waiting period following the connection of a USB memory stick. When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes. This phenomenon is normal. Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters.
Audio and Telematics Radio QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...). ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the "RDS" function to enable the system to check whether there is a more powerful transmitter in the geographical area.
Audio and Telematics Settings, configuration QUESTION 234 ANSWER SOLUTION There is a difference in sound quality between the different audio sources (radio, USB...). For optimum sound quality, the audio settings (Volume, Treble, Medium, Bass) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, USB...). Check that the audio settings are adapted to the sources listened to.
Audio and Telematics Audio system MODE Contents Audio system glossary 236 First steps 239 Steering mounted controls 241 Radio 242 DAB (Digital Audio Broadcasting) radio 243 245 Media Telephone 247 249 Bluetooth ® Settings 250 Frequently asked questions 251 As a safety measure, the driver must only carry out operations which require prolonged attention while the vehicle is stationary.
Audio and Telematics Audio system glossary Menu item Menu item Significance / Corresponding action Add contacts Add a contact. BTA Bluetooth audio. Add SD Associate a button with a contact. BTA - BT audio player not found The system does not recognise the audio player via Bluetooth. All calls All calls: incoming, outgoing, missed. Call volume Adjust the telephone volume. ASL Mid/Low/High/Off Adjust the audio ambience (mid / low / high). Car device info System information.
Audio and Telematics Menu item Significance / Corresponding action Menu item Significance / Corresponding action Device name Name of the system. Incoming calls Incoming calls. DAB Digital radio. List Audio Display the list of registered audio devices. Dial by number Enter a telephone number. List Phone Display the list of registered telephones. Disconnect Disconnect your telephone. Missed calls Missed calls. Display Setting Activate or deactivate automatic display of connections.
Audio and Telematics Menu item 238 Significance / Corresponding action Menu item Significance / Corresponding action Passkey Change the password. Setup Settings. Phonebook Phone directory. Skip Go to the next step. Radio Display radio mode. Sound Setting Display the sound settings. Region Code Activate or deactivate RDS mode. Speed dials Speed dialling. Reset Reset settings. TA Traffic announcements. Reset all Reset all. TEL Display the list of telephone settings.
Audio and Telematics First steps Audio system with Bluetooth® MODE Display menu and set options. Rotate: scroll through a list or change radio station. Press: confirm the option displayed in the screen. Select AM, FM and DAB* wavebands. Select the BTA (Bluetooth Audio) and AUX (auxiliary) source. On/Off. Volume (each source is independent). Accept an incoming call. Reject an incoming call. End call. AM radio buttons 1 to 6: select a preset radio station.
Audio and Telematics Audio system MODE Display menu and set options. Rotate: scroll through a list or change radio station. Press: confirm the option displayed in the screen. On/Off. Volume (each source is independent). Select: the next radio frequency up/down automatically. the previous/next line in a list or a menu. 240 AM radio buttons 1 to 6: select a preset radio station. FM radio buttons 1 to 5: select a preset radio station. FM list: display the radio stations received.
Audio and Telematics Steering mounted controls Radio: change to preset radio stations in ascending order. Media: next track. Radio: change to preset radio stations in descending order. Media: previous track. Select AM and FM wavebands and BTA (Bluetooth Audio) and / or AUX (Auxiliary) sources. Press and hold: Mute / restore sound from the radio or pause media sources. Increase volume. Accept an incoming call. Decrease volume. Reject the incoming call. End the call in progress. .
Audio and Telematics Radio Selecting a station Presetting a station Press on "MODE" to select the FM or AM waveband. Press on "MODE" to select the FM or AM waveband. Briefly press one of the buttons to carry out an automatic search down/ up for radio stations. Briefly press one of these buttons to start an automatic search up/down for frequencies. Turn the dial to carry out a manual search down/up for radio stations. Press and hold one of the buttons to preset the current radio station.
Audio and Telematics DAB (Digital Audio Broadcasting) radio Receiving TA messages Digital radio The TA (Traffic Announcement) function gives priority to playing alert messages on the state of the traffic. To be active, this function requires good reception of a radio station that broadcasts this type of message. As soon as traffic information is broadcast, the media playing is interrupted automatically to transmit the TA message. Normal play of the media is restored after transmission of the message.
Audio and Telematics DAB / FM station tracking Digital radio does not cover 100% of the country. When the digital signal is weak, the alternative DAB frequency option, "DAB AF", makes it possible to continue listening to the same station, by automatically switching to the corresponding "FM" station (if there is one). Press on MENU to display the list. Turn the knob to select "Radio" then press to confirm. Turn the knob to select "DAB AF", press to activate or deactivate the frequency.
Audio and Telematics Media USB player Insert a USB memory stick into the USB port or connect a USB peripheral device to the USB port using a suitable cable (not supplied). The system builds playlists (in temporary memory), an operation which can take from a few seconds to several minutes at the first connection. Reduce the number of non-music files and the number of folders to reduce the waiting time. The playlists are updated every time the ignition is switched off or connection of a USB memory stick.
Audio and Telematics Audio streaming The system accepts USB mass storage devices or Apple ® players via the USB ports. The adaptor cable is not supplied. Control of the peripheral device is with the audio system controls. Other peripherals, not recognised on connection, must be connected to the auxiliary socket using a Jack cable (not supplied). The system can alternatively read files via the Bluetooth ® system and the USB port. It is recommended that the USB cable for the portable device is used.
Audio and Telematics Telephone Pairing a Bluetooth® telephone As a safety measure and because they require prolonged attention on the part of the driver, the operations for pairing the Bluetooth mobile telephone to the hands-free system of the audio system must be carried out with the vehicle stationary. Switch on the Bluetooth function of your telephone and ensure that it is "visible to all" (telephone configuration).
Audio and Telematics Receiving a call List of telephone menus Press on MENU, turn the knob to select "TEL", then press to display the list and move through the menus using this knob. An incoming call is announced by a ring and a superimposed display in the screen. Press this button to accept the incoming call. Level 1 Level 2 Making a call Press this button to navigate in the telephone menu. Select "Phonebook" to go to your contacts, then navigate using the knob.
Audio and Telematics Bluetooth® List of Bluetooth® menus Press on MENU, turn the knob to select "Bluetooth", then press to display the list and move through the menus using this knob. Level 1 Bluetooth Level 2 Level 3 Corresponding action Pairing - Connect a portable device by Bluetooth. List Phone - Display the list of registered telephones. List Audio - Display the list of audio devices registered. Passkey Enter new passkey Change or enter a password.
Audio and Telematics Settings System settings Press on "MENU" to display the list of options. Turn the dial to select "Bluetooth", press to display the list of Bluetooth settings. Turn the knob to select "Sound Setting", press to display the list of settings for activating or deactivating options: "Bass" "Treble" "Balance" "ASL" Turn the knob to select "Pairing", press to display the list. Press the corresponding button to change or confirm the options.
Audio and Telematics Frequently asked questions The following table groups together the answers to the most frequently asked questions concerning your audio system. Telephone, Bluetooth® QUESTION I cannot connect my Bluetooth telephone. ANSWER The telephone's Bluetooth function may be switched off or the telephone may not be visible. SOLUTION - Check that your telephone's Bluetooth function is switched on. Check in the telephone settings that it is "visible to all".
Audio and Telematics USB, portable player 252 QUESTION ANSWER SOLUTION There is a long waiting period following the connection of a USB memory stick. When a new medium is inserted, the system reads a certain amount of data (directory, title, artist, etc.). This may take from a few seconds to a few minutes. This phenomenon is normal. Some characters in the media information are not displayed correctly while playing. The audio system does not display some types of characters.
Audio and Telematics Radio QUESTION The quality of reception of the radio station listened to gradually deteriorates or the stored stations do not function (no sound, 87.5 Mhz is displayed...). ANSWER SOLUTION The vehicle is too far from the transmitter used by the station listened to or there is no transmitter in the geographical area through which the vehicle is travelling. Activate the "RDS" function to enable the system to check whether there is a more powerful transmitter in the geographical area.
Audio and Telematics Settings, configuration QUESTION 254 ANSWER SOLUTION There is a difference in sound quality between the different audio sources (radio, USB...). For optimum sound quality, the audio settings (Volume, Treble, Medium, Bass) can be adapted to the different sound sources, which may result in audible differences when changing source (radio, USB...). Check that the audio settings are adapted to the sources listened to.
Alphabetical index A ABS........................................................ 107, 108 Accessories................................................... 142 Access to rear seats (3-door)..........................47 Active City Brake............................................ 110 Adjusting seats.................................................46 Adjusting the air distribution............... 54, 55, 58 Adjusting the air flow........................... 54, 55, 58 Adjusting the temperature.............
Alphabetical index E Eco-driving . ......................................................9 Electronic brake force distribution (EBFD)................................................. 107, 108 Emergency braking assistance (EBA)...........................................................107 Emergency warning lamps............................106 Energy economy mode.................................. 141 Engine compartment..................................... 147 Engine.....................................
Alphabetical index N Lamps, rear....................................................166 Lane Departure Warning System (LDWS).............................................93 Level, brake fluid............................................150 Level, engine coolant.........................................................149 Level, engine oil.............................................148 Levels and checks.................................. 147-150 Level, screenwash fluid..........................................
Alphabetical index Screenwash...................................................105 Seat belts.................................. 48, 115-117, 129 Seats, front.......................................................46 Seats, rear.................................................. 47, 48 Selector, gear...................................................77 Servicing............................................................9 Sidelamps....................................... 98, 164, 166 Side repeater............
Labels are fitted in various areas of your vehicle. They We draw your attention to the following points: carry safety warnings as well as vehicle identification - The fitting of electrical equipment or accessories not information. Do not remove them: they form an integral part listed by CITROËN may cause faults and failures of your vehicle. with the electrical system of your vehicle. Contact a CITROËN dealer for information on the range of recommended accessories.
2016 – DOCUMENTATION DE BORD 4Dconcept Diadeis Interak 16.C1.
Compatibility of fuels Fuel used for petrol engines The petrol engines are compatible with bio-fuels that conform to current and future European standards and can be obtained from filling stations. Petrol that meets the EN228 standard, mixed with a bio-fuel meeting the EN15376 standard. The only petrol additives authorised for use are those that meet the B715001 standard.
