Operation Manual

6
MANUAL PRE-SETTING
Select the waveband and memory bank
required using button
E
.
Select a station using either automatic or
manual search.
Keep pressing for more than two seconds
on one of the pre-selection buttons
1
to
6
on the keypad
P
.
The sound momentarily cuts off, then returns
to its previous level to confi rm that it has
memorised the station.
R A D I O S O U RC E
AUTOMATIC MEMORISATION OF TRANS-
MITTERS (AUTOSTORE FUNCTION)
In FM, if you hold down button
E
for more
than two seconds, your radio will automati-
cally memorise the 6 strongest stations on
the FM3 memory bank.
The display shows “
FM AST
”.
The radio memorises the 6 strongest trans-
mitters, deleting the 6 previously memo-
rised.
After the memorisation, the radio goes directly
to memory 1 of memory bank FM3.
Note :
If the traffic information function has
been activated (see RDS SYSTEM),
the stations offering this facility will be
memorised as priority.
If it is unable to memorise any new sta-
tions, the system will retain the previously
memorised stations.
If the system is unable to fi nd 6 stations,
the unfilled memory slots will remain
free.
•
•
RECALL OF PRE-SET STATIONS
Press button
E
briefl y to select the required
waveband and memory bank.
A short press on one the pre-selection
buttons
1
to
6
on the keypad
P
recalls the
corresponding memorised station. You
can also do this using the control
1
at the
steering wheel.
If it is a RDS station, the frequency appears
some seconds before the name appears.
For RDS stations, recall of a station may
prompt a search for a frequency correspond-
ing to the region where you happen to be
(see RDS system).