Operation Manual

13
B LU E TO OT H
VOICE RECOGNITION
A short press on the end of the control stalk
7
starts telephone voice recognition.
Voice recognition allows you to make a call
to a number for which you have recorded a
label on the mobile telephone that is twinned
and connected.
Remark :
It is possible to stop the call, provided the
dialling has not yet commenced, with a
short press on the end of the lighting control
stalk
7
.
Remarks :
While you are on a call, the audio source
currently being listened to is paused.
Some ring tones on your mobile telephone
may not be recognised by the Bluetooth
system on your vehicle. A different ring
tone will be chosen by the system.
•
•
DISPLAYS
A press on the “
TEL
” button displays the
TELTEL
telephone information on the right on your
screen.
A “
Telephone
” symbol appears on your
display when you connect a mobile tel-
ephone.
A “
Battery
” symbol appears at the bottom
of the display to indicate the range of the
mobile telephone connected.
An “
Envelope
” symbol appears at the bot-
tom of the display to indicate the presence
of an unread SMS on the mobile telephone
connected.
A “
Sound track
” symbol appears at the
bottom of the display to indicate the pres-
ence of a message on the mobile telephone
connected.
Swapping a call
During a telephone conversation, the system
is able to tell you of a second call incoming.
To accept it, validate. To change from one
call to the other, select this choice.
End a call
This choice enables you to end a telephone
conversation, for example if there is another
call incoming.
Secret mode
Select this choice. This allows you not to
be heard by the other person. To restore
sound to the other person, select deacti-
vation of Secret mode in the menu “
Call
Management
”.
Note :
If you wish to transfer a call from the audio
system to the mobile telephone (for example
when leaving your vehicle), refer to the user
instructions for the latter.