Operation Manual

26
R A D I O S O U RC E
AUTOMATIC SEARCH
A short press on one of the buttons
M
or
N
will tune into higher or lower radio stations
respectively, within the chosen waveband.
By keeping one of the buttons
M
or
N
pressed, you can scroll continuously through
the waveband. The scrolling will stop at
the fi rst station it fi nds once the button is
released.
You can also do this by means of controls
2
and
3
at the steering wheel.
If NaviDrive did not manage to capture a
station on a frequency known to you (recep-
tion very weak), you can perform a manual
search for this station.
TUNING SENSITIVITY
Automatic searches can be carried out
according to two levels of sensitivity :
To capture the most powerful transmit-
ters, choose the local search mode “
LO
”
(default option).
To capture the weakest or most distant
transmitters, choose the sensitive search
mode “
DX
”.
Search for a station is done fi rst in “
LO
”
(local) sensitivity, then in “
DX
” (distant)
sensitivity.
To commence a search in sensitivity “
DX
”
(distant) immediately , press twice in succes-
sion on one of the buttons
M
or
N
.
•
•
AUTOMATIC MEMORISATION OF TRANS-
MITTERS (AUTOSTORE FUNCTION)
In FM, if you keep pressing for more than
two seconds on button
R
, your Navi-Drive
will automatically memorise the 6 strongest
transmitters on the FMast memory bank.
NaviDrive memorises the 6 strongest trans-
mitters by deleting the 6 previously memo-
rised.
After the memorisation, NaviDrive goes
immediately to memory 1 of the FMast
memory bank.
Note :
If the traffi c information function has been
activated (see RDS SYSTEM), the stations
offering this facility will be memorised
as priority.
If it is unable to memorise any new sta-
tions, the system will retain the previously
memorised stations.
If the system is unable to fi nd 6 stations,
the unfilled memory slots will remain
unchanged.
•
•
SEARCHING FOR A STATION IN A
SORTED LIST
To search for a station in a sorted list, your
installation periodically updates the list of
the stations received around your vehicle.
It shows you what stations are available,
fi rst in alphabetical order, then by frequency
in ascending order if the names are not
known.
To access this list, give a short press on
button
T
.
This list is updated automatically every 10
minutes.
You can update this list at any time, by giv-
ing a long press on button
T
when the list is
displayed on the multifunction screen.