Operation Manual

A
II
45
S I G N A L L I N G
Lighting control stalk
All vehicle lamps off
Sidelamps on
The instrument panel lights
up.
Dipped beams/
main beams on
Rotate the ring
A
forwards.
Rotate the ring
A
forwards.
Sidelamps and dipped beams
come on automatically in poor
ambient light, or if the wipers are in
continuous operation. They go out
as soon as the ambient light again
become suffi cient or when the wip-
ers cease to operate.
Guide-me-home lighting
This function switches on your
headlamps, to light your way when
you wish to walk from a carpark,
for example.
This function is activated:
Manually by pulling the lighting
stalk towards you, ignition off.
Automatically, provided:
The automatic lighting of
headlamps is activated.
To activate the guide-me-
home lighting function,
select in the "Main menu",
then in "Personalisation/
Confi guration", the sub-menu
for lighting and signalling,
then activate the function.
See "Multifunction display".
Note:
It is possible to modify the
duration of the guide-me-
home lighting (approx. 60, 30
or 15 seconds) in the menu
"Personalisation/
Confi guration".
On screen
A
, the length is fi xed.
Note:
On vehicles equipped with
daytime running lamps, automatic
headlamp lighting and guide-me-
home lighting are not available.
•
•
-
-
•
•
Rotate the ring
A
forwards.
Pull the control stalk
towards you
to change between dipped beam
and main beam.
Rotate the ring
A
forwards.
Take care not to cover the bright-
ness sensor, which is visible from
outside the windscreen, behind
the interior rear view mirror.
Automatic lighting of
headlamps