Operation Manual

5
3
4
B
A
5
3
4
III
76
Air conditioning
The air conditioning only operates
when the engine is running.
Press the control located on the
control panel.
Warning lamp on = in operation
Air conditioning is obtained by the mixing of
hot air and cold air. Control
4
allows you to
adjust the air conditioning while control
5
is in
operation.
To obtain refrigerated air, you should check that
the air blower control
3
is not on position
"0"
.
Air recirculation
This function isolates the passen-
ger compartment from disagree-
able odours or smoke coming
from outside and increases the effi ciency and
rapidity of the air conditioning.
According to version, press on control
A
(warning lamp comes on), or move control
B
.
The entry of air from outside is blocked.
This function should be cancelled when no
longer needed in order to permit a renewal of
cabin air and to prevent misting.
Note:
To obtain a rapid rise in cabin temperature,
place control
A
or
B
in the air recirculation posi-
tion and control
4
on maximum in the red zone.
4
If after a prolonged stop in bright sunlight, the cabin temperature
is very high:
Open the windows for a few moments to let in air, then close
the windows again.
Adjust the temperature on control
4
to the maximum cold position.
4
Open the air vents.
Use the recycled cabin air position.
Place the air blower control
3
to the position close to maximum.
With comfort restored, action the air blower
3
and the
temperature control
4
to adjust comfort.
•
•
•
•
•
•
M A N U A L A I R C O N D I T I ON I N G