Operation Manual

10
12
6
C
HE
C
K
S
B
ONNET
) Push the exterior safety catch B to
the left and raise the bonnet.
) Unclip the stay C from its housing.
) Fix the stay in the notch to hold the
bonnet open.
Closin
g
) Take the stay out of the support
notch.
) Clip the stay in its housing.
) Lower the bonnet and release it at
the end of its travel.
) Pull on the bonnet to check that it is
secured correctly.
) Open the front left door.
) Pull the interior bonnet release le-
ver A , located at the bottom of the
door aperture.
The location of the interior bon-
net release lever prevents open-
ing of the bonnet while the front
left door is closed.
Openin
g
Before doing anything under the
bonnet, switch off the Stop &
Start system to avoid any risk of
injury resulting from an automat-
ic change to START mode.
Do not open the bonnet in high
winds.
When the engine is hot, handle
the exterior safety catch and the
bonnet stay with care (risk of
burns).