Operation Manual

11
142
P
RA
C
TI
C
AL INF
O
RMATI
O
N
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb.
1. Direction indicators
(H21W amber).
2. Dipped beam headlamps
(H7-55W).
3. Main beam headlamps (H1-55W).
4. Sidelamps (W5W).
5. Foglamps (PSX24W).
The headlamps are fi tted with
polycarbonate glass with a pro-
tective coating:
) do not clean them using a
dry or abrasive cloth, nor
with a detergent or solvent
product,
)
use a sponge and soapy water,
) when using a high pressure
washer on persistent marks,
do not keep the lance direct-
ed towards the lamps or their
edges for too long, so as not
to damage their protective
coating and seals.
Front lam
p
s
) Do not touch the bulb directly
with your fi ngers, use lint-free
cloths.
Changing a bulb should only be
done after the headlamp has
been switched off for a few min-
utes (risk of serious burns).
It is imperative to use only anti-
ultraviolet (UV) type bulbs in order
not to damage the headlamp.
Always replace a failed bulb
with a new bulb with the same
type and specifi cation.