Operation Manual

11
14
6
P
RA
C
TI
C
AL INF
O
RMATI
O
N
Changing foglamp/reversing lamp
bulbs
) open the boot,
)
press on the tabs using 2 screwdrivers,
) disconnect the lamp connector,
) turn the bulb holder by a quarter
turn,
) remove the bulb and replace it.
To re fi t, carry out these operations in re-
verse order.
Changing the third brake lamp bulbs
(4 W5W bulbs)
) open the boot,
) remove the two plugs located on the
boot inner panel,
) press on the body of the lamp with
2 screwdrivers to remove it from its
housing,
) turn the corresponding bulb-holder
a quarter turn,
) pull the bulb and replace it.
To re fi t, carry out these operations in re-
verse order.
Changing the number plate lamp
bulbs (W5W)
) insert a thin screwdriver into one of
the lens’ exterior holes,
) push it outwards to unclip,
) remove the lens,
) pull the bulb and replace it.
To re fi t, carry out these operations in re-
verse order.