Operation Manual

11
15
9
P
RA
C
TI
C
AL INF
O
RMATI
O
N
Towin
g
y
our vehicle
) On the front bumper, unclip the cover
by pressing at the top left and pulling
at the bottom right of the cover.
) Screw the towing eye in fully.
) Install the towing bar.
) Switch on the hazard warning lamps
on the towed vehicle.
) Place the gear lever in neutral.
) On the rear bumper, unclip the cover
by pressing at the bottom.
) Screw the towing eye in fully.
) Install the towing bar.
) Switch on the hazard warning lamps
on the towed vehicle.
Towin
g
another vehicle
Failure to observe this special
condition could result in damage
to certain braking components
and the absence of braking
assistance the next time the
engine is started.