Operation Manual

91
VII
C H I L D S A F E T Y
"ISOFIX" MOUNTINGS
Your vehicle has been approved in
accordance with the new ISOFIX
regulation .
The outer rear seats of your vehicle
are fi tted with regulation ISOFIX
mountings.
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
For information regarding the op-
tions for installing ISOFIX child
seats in your vehicle, consult the
table summarising the locations for
ISOFIX child seats.
These are three rings for each seat:
- two rings A , located between the
vehicle seat back and cushion,
indicated by a label,
- a ring B , referred to as the TOP
TETHER , located in the boot be-
tween the wheel arch and the
seat back.
This ISOFIX mounting system guaran-
tees you fast, reliable and safe fi tting of
the child seat in your vehicle.
The ISOFIX child seats are fi tted
with two locks which are secured
easily on the two rings A .
Some also have an upper strap
which is attached to the ring B .
To attach this strap, remove the ve-
hicle seat's head restraint and the
cover at the top of the seat back.
Then fi x the hook on the ring B and
tighten the upper strap.