Operation Manual

125
X
C H E C K S
BLEEDING THE DIESEL
FILTER
Protective cover
Removal
 Remove the protective cover by
unclipping fi rst point 1 , then 3
and 4 .
 Unclip point 2 pulling towards
you, then lift.
Refi tting
 Clip point 2 fi rst.
 Lower the cover, centring it.
 Clip points 1 and 4 , pushing ver-
tically and slightly rearwards.
 Clip point 3 , pushing vertically.
Bleeding water from
the fuel filter
Bleed on a regular basis (at every
oil change).
To evacuate the water, slacken the
bleed screw or the water-in-diesel-
fuel sensor, which is located at the
base of the fi lter.
Continue until water ceases to fl ow
out.
Then retighten the bleed screw or
the water-in-diesel-fuel sensor.