Operation Manual

137
XI
P R A C T I C A L I N F O R M A T I O N
 Switch on the compressor by
moving the switch B to posi-
tion "I" until the tyre pressure
reaches 2.0 bars.
If after around 5 to 7 minutes the
pressure is not attained, this indicates
that the tyre is not repairable; contact
a CITROËN dealer for assistance.
 Remove the kit and rescrew the
cap on the white pipe. Take care
to avoid staining your vehicle
with traces of fl uid. Keep the kit
to hand.

Drive immediately for approximate-
ly three miles (fi ve kilometres), at
reduced speed (between 15 and
35 mph [20 and 60 km/h]), to plug
the puncture.
 Stop to check the repair and the
tyre pressure using the kit.
Checking tyre pressures/
Infl ating accessories
You can use the compressor, with-
out injecting the product, for the
routine check and adjustment of
the tyre pressures on your vehicle.
It can also be used to infl ate other
items such as a ball or bicycle tyre.
Turn the selector to the "AIR" posi-
tion, connect the black pipe to the
valve of the wheel or the item to
be infl ated with, if necessary, one
of the connectors supplied with the
kit, then follow the remainder of the
procedure below until the kit is re-
moved.
 Turn the selector A to
the "AIR" position:
 Connect the black pipe D to the
valve of the wheel.