Operation Manual

139
XI
P R A C T I C A L I N F O R M A T I O N
Model with halogen headlamps
The headlamps are fi tted with poly-
carbonate glass with a protective
coating:
 do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
 use a sponge and soapy water,
 when using a high pressure
washer on persistent marks, do
not direct at the lamps or their
outlines for too long, so as not to
damage their protective coating
and seals.
 Do not touch the bulb di-
rectly with your fi ngers,
use lint-free cloths.
Changing a halogen bulb should
only be done after the headlamp
has been switched off for a few
minutes (risk of serious burns).
It is imperative to use only anti-ultra-
violet (UV) type bulbs in order not to
damage the headlamp.
1. Dipped beams (H7-55 W)
2. Main beams (H1-55 W)
3. Sidelamps (H6W-6 W)
4. Direction indicators
(H21-21 W)
CHANGING A BULB
Procedure for replacing a faulty bulb
with a new bulb without the use of
tools.
Front lamps