Operation Manual

140
XI
P R A C T I C A L I N F O R M A T I O N
Dipped beam headlamps
 Remove the rubber cover.
 Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
 Replace the faulty bulb.
 Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
 Refi t the rubber cover.
Main beam headlamps
 Remove the rubber cover.
 Detach the clips by lowering
them on each side of the bulb.

Pull on the bulb-holder to remove it.
 Replace the faulty bulb.
 Push the bulb-holder back into
its housing.
 Reattach the clips.
 Refi t the rubber cover.
Sidelamps
 Rotate the bulb-holder a quarter
turn anti-clockwise.
 Remove it from its housing.
 Replace the faulty bulb.
 Reposition the bulb-holder.
 Rotate it a quarter turn clockwise
to reposition in its housing.