Operation Manual

126
Driving
Nflashesintheinstrumentpanel,
accompaniedbyanaudiblesignaland
amessageifthecontrolN has not been
pressedforstarting.
Press control Ntoselectneutral.
Moving off
F Switchontheignition.
F Selectneutral(controlN).
 Theindicatorlampforthecontrolcomeson.
F Pressthebrakepedalfully.
F Starttheengine.
Nappearsintheinstrumentpanel.
F Selectforwarddrive(controlD)orreverse
(controlR)
 Theassociatedindicatorlampcomesonin
thecontrolpanel.
Dand1 or Rappearintheinstrument
panel.
Creep function
This function allows the vehicle to be
manoeuvredmoreeasilyatlowspeeds(when
parking,intrafficjams...).
AfterpressingcontrolD or R, the vehicle
moves as soon as you take your foot off the
brake pedal,atlowspeedandwiththeengine
atidle.
Thecreepfunctionmaybetemporarily
unavailableiftheclutchtemperatureis
toohighortheslopetoosteep.
Donotleavechildrenunsupervised
insidethevehiclewhentheengineis
running.
Youmustkeepyourfootonthebrake
pedalwhilestartingtheengine.
The"Footonthebrake"warningand
theassociatedcontrolpanelindicator
lampflashifthebrakepedalisnot
pressedwhenstartingtheengine.
Pressfirmlyonthebrakepedal.
F Releasetheparkingbrake.
F Progressivelytakeyourfootoffthebrake
pedal.
 Thevehiclemovesoff.