Operation Manual

161
7
Practical information
Changingawiperblade
F Withinoneminuteafterswitchingoff
theignition,operatethewiperstalkto
positionthewiperbladesverticallyonthe
windscreen.
Removing
F Raisethecorrespondingwiperarm.
F Pullthescreenwashdeliverypipeto
disconnectitfromthejet(locatedonthe
wiperblade).
F Unclipthewiperbladeandremoveit.
Fitting
F Putthecorrespondingnewwiperbladein
placeandclipit.
F Connectthescreenwashdeliverypipeto
thejetonthewiperblade.
F Folddownthewiperarmcarefully.
After fitting a front wiper
blade
F Switchontheignition.
F Operatethewiperstalkagaintoparkthe
wiperblades.
Before removing a front
wiper blade