Operation Manual

195
8
In the event of a breakdown
Changingabulb
Front lamps
1. Daytimerunninglamps/Sidelamps
(LEDs).
2. Dippedbeamheadlamps(H7).
3. Mainbeamheadlamps(H1).
4. Directionindicators(PY21W).
5. Frontfoglamps(PS24W).
Insomeweatherconditions(e.g.low
temperatureorhumidity),thepresence
ofmistingontheinternalsurfaceofthe
glassoftheheadlampsandrearlamps
isnormal;itdisappearsafterthelamps
havebeenonforafewminutes.
Theheadlampsarefittedwith
polycarbonateglasswithaprotective
coating:
F do not clean them using a dry
or abrasive cloth, nor with a
detergent or solvent product,
F useaspongeandsoapywaterora
pHneutralproduct,
F whenusingahighpressurewasher
onpersistentmarks,donotkeep
thelancedirectedtowardsthe
lampsortheiredgesfortoolong,
soasnottodamagetheirprotective
coatingandseals.
Changingabulbshouldonlybedone
aftertheheadlamphasbeenswitched
offforseveralminutes(riskofserious
burns).
F Donottouchthebulbdirectlywith
yourfingers,usealint-freecloth.
Itisimperativetouseonlyanti-
ultraviolet(UV)typebulbstoavoid
damagingtheheadlamp.
Alwaysreplaceafailedbulbwitha
newbulbwiththesametypeand
specification.