Operation Manual

VII
119
C H I L D S A F E T Y
"ISOFIX" MOUNTINGS
Your vehicle has been approved in
accordance with the latest ISOFIX
regulation s.
The three second row seats are fi tted
with regulation ISOFIX mountings.
There are three rings for each seat:
- two rings A , located between the
vehicle seat back and cushion,
indicated by a label,
- a ring B , used to fi x the upper
strap, referred to as the TOP
TETHER , indicated by a label
on a cover at the top of the seat
back.
This ISOFIX mounting system guar-
antees you fast, reliable and safe
fi tting of the child seat in your ve-
hicle.
The incorrect installation of a child
seat in a vehicle compromises the
child's protection in the event of an
accident.
For information on installing
ISOFIX child seats in your vehicle,
refer to the table showing the loca-
tions that can be used for ISOFIX
child seats.
ISOFIX child seats are fi tted
with two latches which are secured
easily on the two rings A .
Some also have an upper strap
which is attached to the ring B .
To attach this strap, remove the ve-
hicle seat's head restraint and the
cover at the top of the seat back.
Then fi x the hook on the ring B and
tighten the upper strap.