Operation Manual

IX
146
D R I V I N G
Displays on the instrument panel
- The selector lever position is dis-
played in the instrument panel,
on the left on the A and C multi-
function screens and on the right
on NaviDrive and MyWay multi-
function screens.
-
A back-lit position grille associated
with the selector lever shows the
position selected.
When the ignition is on,
lighting of the service
warning lamp, accompa-
nied by an audible signal and
the message "Gearbox faulty"
indicates a malfunction.
Consult a CITROËN dealer.
For safety:
 Position N can only be disen-
gaged if you are pressing the
brake pedal.
 If the gearbox is in position N
but the selector lever position is
different, reposition the selector
lever on N in order to be able to
start.
Moving off
 To start the engine, the selector
lever must be in position N .
 Press fi rmly on the brake pedal.
 Operate the starter.
 When the engine is running,
place the selector lever on R , A
or M as desired.
 In the instrument panel, check
the position engaged.
 Release the brake pedal and
accelerate.
If the selector lever is not in posi-
tion N , and/or if the brake pedal is not
pressed, the corresponding warning
lamp(s) are displayed and a mes-
sage informs you that at least one of
these two conditions is not met.
In this case, the engine will not start,
recommence the above procedure.
6-SPEED ELECTRONIC
GEARBOX SYSTEM
The 6-speed electronic gearbox of-
fers a choice between the comfort of
fully automatic operation or the driving
pleasure of manual gear changing.
You have a choice of two driving
modes:
- automatic mode for automatic
control of the gears by the gear-
box,
- sequential mode for manual
changing of the gears by the
driver.
 automatic mode: selector lever 2
in position A .
 manual mode: selector lever 2 in
position M .
In automatic mode, instant manual
operation is possible any time you
operate one of the paddles 1 .
Mode selection