Operation Manual

IX
153
D R I V I N G
AUTOMATIC GEARBOX
Automatic gearbox which offers a
choice between the ease of fully
automatic operation or the driving
pleasure of manual gear changing.
There is a choice of two driving
modes:
- automatic operation for elec-
tronic control of the gears by the
gearbox,
- manual operation for sequen-
tial changing of the gears by the
driver.
 automatic mode: selector 1 in
position D ,
 sequential mode: selector 1 in
position M .
The position of the selector lever is
displayed on the instrument panel,
on the left on the A and C multifunc-
tion screens and on the right on the
MyWay and NaviDrive multifunction
screens.
A grille associated with the selector
lever also allows you to see the se-
lected position.
Position P can only be dis-
engaged if pressing the
brake pedal.
On opening a door, there is an au-
dible signal if the selector lever is
not in position P .
In all circumstances, ensure that
the selector lever is in position P
before leaving your vehicle.
If the gearbox is in position P but
the position of the selector lever is
different, reposition the selector le-
ver on P so that you can start the
vehicle.
Never press the brake and ac-
celerator pedals simultaneously.
Braking and acceleration should
be done only with the right foot.
Pressing both pedals simultane-
ously introduces a risk of damage
to the gearbox.
Displays on the instrument panel
Multifunction screen A or C MyWay or NaviDrive
multifunction screen
Mode selection