Operation Manual

XI
188
P R A C T I C A L I N F O R M A T I O N
Main beam headlamps
 Remove the rubber cover.
 Detach the clips by lowering
them on each side of the bulb.

Pull on the bulb-holder to remove it.
 Replace the faulty bulb.
 Push the bulb-holder back into
its housing.
 Reattach the clips.
 Refi t the rubber cover.
Dual-function Xenon headlamps
(dipped/main beam)
Additional main beam headlamps
 Remove the rubber cover.
 Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
 Replace the faulty bulb.
 Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
 Refi t the rubber cover.
If the headlamp bears this
symbol, any operation to
change the Xenon dual-
function directional head-
lamp (D1S-35 W) must be carried
out by professionals (risk of elec-
trocution).
Consult a CITROËN dealer.
It is recommended to change both
bulbs at the same time if one of
them is faulty.
Dipped beam headlamps
 Remove the rubber cover.
 Rotate the bulb-holder a quarter
turn anti-clockwise and remove it
from its housing.
 Replace the faulty bulb.
 Reposition the bulb-holder by
pushing it in, tightening it by a
quarter turn clockwise.
 Refi t the rubber cover.