Operation Manual

XI
194
P R A C T I C A L I N F O R M A T I O N
CHANGING A FUSE
Before replacing a fuse:
- the cause of the failure must be
identifi ed and rectifi ed,
- all electrical consumers must be
switched off,
- your vehicle must be stationary
with the engine off.
Identify the failed fuse by reference
to the tables and layout drawings
below.
Access to tools
The extraction tweezer A is located
on the back of the dashboard fuse-
box cover.
For access to it:
 open the glove box lid,
 unclip the fusebox cover by pull-
ing on the top right, then left,
 pull the cover down,
 remove the tweezer.
Changing a fuse
 Use the special tweezer A to re-
move the fuse from its housing
and check the condition of the
fi lament.
 Replace the failed fuse with a
fuse of the same rating (same
colour) .
A different rating may cause a
malfunction (risk of fi re).
If the fault occurs again soon after
replacing the fuse, have the electri-
cal system checked by a CITROËN
dealer.
Correct Incorrect
Tool A
Fuses under the dashboard
Your vehicle’s electrical
system is designed to oper-
ate with either standard or
optional equipment.
Before installing electrical equip-
ment or accessories on your vehi-
cle, consult a CITROËN dealer.
CITROËN declines all responsi-
bility for the consequences and
costs that are caused by faults or
repairs on your vehicle resulting
from the installation of accesso-
ries that are not supplied and/or
not recommended by CITROËN
and not installed according to its
instructions, particularly when the
energy consumption of all of the
additional accessories connected
exceeds 10 milliamperes (Ma).